Preparation of high performance adhesives matrix based on epoxy resin modified by bis-hydroxy terminated polyphenylene oxide

References

• Merah A, Khenfer MM, Korichi Y. The effect of industrial coating type acrylic and epoxy resins on the durability of concrete subjected to accelerated carbonation. J Adhes Sci Technol. 2015;29(22):2446–2460.10.1080/01694243.2015.1067004
   Web of Science ®Google Scholar
• Manolea H, Antoniac I, Miculescu M, et al. Variability of the composite resins adhesion with the dental substrate preparation and the used adhesive type. J Adhes Sci Technol. 2016;30(16):1754–1764.
   Web of Science ®Google Scholar
• Khakimova R, Burau F, Degenhardt R, et al. Design and manufacture of conical shell structures using prepreg laminates. Appl Compos Mater. 2016;23(3):289–312.10.1007/s10443-015-9461-4
   Web of Science ®Google Scholar
• Subramanian AS, Ju NT, Zhang L, et al. Synergistic bond strengthening in epoxy adhesives using polydopamine/MWCNT hybrids. Polymer. 2016;82:285–294.10.1016/j.polymer.2015.11.031
   Web of Science ®Google Scholar
• Beber VC, Schneider B, Brede M. Influence of temperature on the fatigue behaviour of a toughened epoxy adhesive. J Adhes. 2016;92(7–9):778–794.10.1080/00218464.2015.1114927
   Web of Science ®Google Scholar
• Guzman-Maldonado E, Hamila N, Boisse P, et al. Thermo mechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites. Compos Part A Appl Sci Manuf. 2015;78:211–222.10.1016/j.compositesa.2015.08.017
   Web of Science ®Google Scholar
• Hsieh AJ, Chantawansri TL, Hu W, et al. New insight into the influence of molecular dynamics of matrix elastomers on ballistic impact deformation in UHMWPE composites. Polymer. 2016;95:52–61.10.1016/j.polymer.2016.04.048
   Web of Science ®Google Scholar
• Wei G, Sue H. Fracture mechanisms in preformed polyphenylene oxide particle-modified bismaleimide resins. J Appl Polym Sci. 2015;74(10):2539–2545.
   Google Scholar
• Arnebold A, Wellmann S, Hartwig A. Partially crystalline epoxy networks with superior mechanical and adhesion properties. J Adhes Sci Technol. 2016;30(9):960–971.10.1080/01694243.2015.1132577
   Web of Science ®Google Scholar
• Wu Q, Li W, Zhang J, et al. Tribological, mechanical properties and morphology of polyphenylene oxide/ultra high molecular weight polyethylene blends. Polym-Plastics Technol Eng. 2016;56(5):535–542.
   Web of Science ®Google Scholar
• Polotskaya GA, Lebedev VT, Pulyalina AY, et al. Structure and transport properties of pervaporation membranes based on polyphenylene oxide and heteroarm star polymers. Pet Chem. 2016;56(10):920–930.10.1134/S0965544116100091
   Web of Science ®Google Scholar
• Wilkinson AN, Kinloch IA, Othman RN. Low viscosity processing using hybrid CNT-coated silica particles to form electrically conductive epoxy resin composites. Polymer. 2016;98:32–38.10.1016/j.polymer.2016.06.009
   Web of Science ®Google Scholar
• Tian N, Ning R, Kong J. Self-toughening of epoxy resin through controlling topology of cross-linked networks. Polymer. 2016;99:376–385.10.1016/j.polymer.2016.07.038
   Web of Science ®Google Scholar
• Largier T, Huang F, Cornelius CJ. Homopolymer and multi-block Diels-Alder polyphenylenes: Synthesis, physical properties, X-ray diffraction, and gas transport. Eur Polymer J. 2017;89:301–310.10.1016/j.eurpolymj.2017.02.030
   Web of Science ®Google Scholar
• Akatsuka M, Takezawa Y, Kamiya H. Delamination mechanism of high-voltage coil insulators made from mica flakes and thermosetting epoxy resin. J Appl Polym Sci. 2015;79(12):2164–2169.
   Google Scholar
• Chen W, Yang H, Zou H, et al. Compatibilized the thermosetting blend of epoxy and redistributed low molecular weight poly(phenylene oxide) with triallylisocyanurate. J Appl Polym Sci. 2016;133(20):43293.
   Web of Science ®Google Scholar
• Hu C, Yu J, Huo J, et al. Effect of clay and PEO-PPO-PEO block copolymer on the microstructure and properties of cyanate ester/epoxy composite. Compos Part A Appl Sci Manuf. 2015;78:113–123.10.1016/j.compositesa.2015.08.002
   Web of Science ®Google Scholar
• Parameswaranpillai J, Sidhardhan SK, Harikrishnan P, et al. Morphology, thermo-mechanical properties and surface hydrophobicity of nanostructured epoxy thermosets modified with PEO-PPO-PEO triblock copolymer. Polym Test. 2017;59:168–176.10.1016/j.polymertesting.2017.01.029
   Web of Science ®Google Scholar
• Wu SJ. Cure reaction and phase separation behavior of cyanate ester-cured epoxy/polyphenylene oxide blends. J Appl Polym Sci. 2006;102(2):1139–1145.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Largier T, Huang F, Cornelius CJ. Homopolymer and multi-block Diels-Alder polyphenylenes: Synthesis, physical properties, X-ray diffraction, and gas transport. Eur Polymer J. 2017;89:301–310.10.1016/j.eurpolymj.2017.02.030
   Web of Science ®Google Scholar
• Prime RB. Differential scanning calorimetry of the epoxy cure reaction. Polym Eng Sci. 1973;13(5):365–371.10.1002/(ISSN)1548-2634
   Web of Science ®Google Scholar
• Wang M, Fan X, Thitsartarn W, et al. Rheological and mechanical properties of epoxy/clay nanocomposites with enhanced tensile and fracture toughnesses. Polymer. 2015;58:43–52.10.1016/j.polymer.2014.12.042
   Web of Science ®Google Scholar
• Wu Z, Wang M, Wang Z. The gas phase SiO 2 /epoxy nanocomposites with enhanced mechanical and thermal properties. High Perform Polym. 2015;27(4):469–475.10.1177/0954008314555528
   Web of Science ®Google Scholar
• Meyva Y, Kaynak C. Toughening of polylactide by bio-based and petroleum-based thermoplastic elastomers. Int Polym Process J Polym Process Soc. 2015;30(5):593–602.10.3139/217.3113
   Web of Science ®Google Scholar
• Pistor V, Puziski L, Zattera AJ. Influence of different concentrations of glycidylisobutyl-POSS on the glass transition of cured epoxy resin. J Appl Polym Sci. 2015;132(7):41453.
   Web of Science ®Google Scholar