Effect of Different Surface Treatment Methods on Micro-Shear Bond Strength of CAD-CAM Restorative Materials to Resin Cement.

References

• Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent. 2007;98(5):389–404.
   PubMed Web of Science ®Google Scholar
• Fasbinder DJ. Clinical performance of chairside CAD/CAM restorations. J Am Dent Assoc. 2006; 137(Suppl): 22S–31S.
   PubMed Web of Science ®Google Scholar
• Higashi M, Matsumoto M, Kawaguchi A, et al. Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 1: Effects of sandblasting and silanization. Dent Mater J. 2016;35(1):21–28.
   PubMed Web of Science ®Google Scholar
• Barutcigil K, Barutcigil Ç, Kul E, Özarslan MM, Buyukkaplan US. Effect of different surface treatments on bond strength of resin cement to a CAD/CAM restorative material. J Prosthodont. 2016 Nov 23. doi: 10.1111/jopr.12574.
   PubMedGoogle Scholar
• Zoidis P, Bakiri E, Polyzois G. Using modified polyetheretherketone (PEEK) as an alternative material for endocrown restorations: A short-term clinical report. J Prosthet Dent. 2017;117(3):335–339.
   PubMed Web of Science ®Google Scholar
• Qin F, Zheng S, Luo Z, et al. Evaluation of machinability and flexural strength of a novel dental machinable glass-ceramic. J Dent. 2009;37(10):776–780.
   PubMed Web of Science ®Google Scholar
• Mrazek WR. Laboratory procedures for fabricating pressable all-ceramic restorations. J Dent Technol. 1997;14(3):21–31.
   PubMedGoogle Scholar
• Belli R, Wendler M, de Ligny D, et al. Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. Dent Mater. 2017;33(1):84–98.
   PubMed Web of Science ®Google Scholar
• Mainjot AK, Dupont NM, Oudkerk JC, et al. From artisanal to CAD-CAM blocks: State of the art of indirect composites. J Dent Res. 2016;95(5):487–495.
   PubMed Web of Science ®Google Scholar
• Lawson NC, Bansal R, Burgess JO. Wear, strength, modulus and hardness of CAD/CAM restorative materials. Dent Mater. 2016;32(11):e275–e283.
   PubMed Web of Science ®Google Scholar
• Cekic-Nagas I, Ergun G, Egilmez F, et al. Micro-shear bond strength of different resin cements to ceramic/glass-polymer CAD-CAM block materials. J Prosthodont Res. 2016;60(4):265–273.
   PubMed Web of Science ®Google Scholar
• Park JH, Choi YS. Microtensile bond strength and micromorphologic analysis of surface-treated resin nanoceramics. J Adv Prosthodont. 2016;8(4):275–284.
   PubMed Web of Science ®Google Scholar
• Lise DP, Van Ende A, De Munck J, et al. Microtensile bond strength of composite cement to novel CAD/CAM materials as a function of surface treatment and aging. Oper Dent. 2017;42(1):73–81.
   PubMed Web of Science ®Google Scholar
• Güngör MB, Nemli SK, Bal BT, et al. Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials. J Adv Prosthodont. 2016;8(4):259–266.
   PubMed Web of Science ®Google Scholar
• Peumans M, Valjakova EB, De Munck J, et al. Bonding effectiveness of luting composites to different CAD/CAM materials. J Adhes Dent. 2016;18(4):289–302.
   PubMed Web of Science ®Google Scholar
• Shimada Y, Yamaguchi S, Tagami J. Micro-shear bond strength of dual cured resin cement to glass ceramics. Dent Mater. 2002;18(5):380–388.
   PubMed Web of Science ®Google Scholar
• Van Meerbeek B, Peumans M, Poitevin A, et al. Relationship between bond-strength tests and clinical outcomes. Dent Mater. 2010;26(2):e100–121.
   PubMed Web of Science ®Google Scholar
• Armstrong S, Geraldeli S, Maia R, et al. Adhesion to tooth structure: a critical review of “micro” bond strength test methods. Dent Mater. 2010;26(2):50–62.
   PubMed Web of Science ®Google Scholar
• Hashem DF, Foxton R, Manoharan A, et al. The physical characteristics of resin composite-calcium silicate interface as part of a layered/laminate adhesive restoration. Dent Mater. 2014;30(3):343–349.
   PubMed Web of Science ®Google Scholar
• Yoshida K, Kamada K, Atsuta M. Effects of two silane coupling agents, a bonding agent, and thermal cycling on the bond strength of a CAD/CAM composite material cemented with two resin luting agents. J Prosthet Dent. 2001;85(2):184–189.
   PubMed Web of Science ®Google Scholar
• Campos F, Almeida CS, Rippe MP, et al. Resin bonding to a hybrid ceramic: effects of surface treatments and aging. Oper Dent. 2016;41(2):171–178.
   PubMed Web of Science ®Google Scholar
• Yoshihara K, Nagaoka N, Maruo Y, et al. Sandblasting may damage the surface of composite CAD-CAM blocks. Dent Mater. 2017;33(3):e124–e135.
   PubMed Web of Science ®Google Scholar
• Duzyol M, Sagsoz O, Polat Sagsoz N, et al. The effect of surface treatments on the bond strength between CAD/CAM blocks and composite resin. J Prosthodont. 2016;25(6):466–471.
   PubMedGoogle Scholar
• Frankenberger R, Hartmann VE, Krech M, et al. Adhesive luting of new CAD/CAM materials. Int J Comput Dent. 2015;18(1):9–20.
   PubMed Web of Science ®Google Scholar
• Vidotti HA, Garcia RP, Conti PC, et al. Influence of low concentration acid treatment on lithium disilicate core/veneer ceramic bond strength. J Clin Exp Dent. 2013;5(4): e157–162.
   PubMedGoogle Scholar
• Elsaka SE. Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: the effect of surface treatments. J Adhes Dent. 2014;16(6):531–540.
   PubMed Web of Science ®Google Scholar
• Loomans BA, Mesko ME, Moraes RR, et al. Effect of different surface treatment techniques on the repair strength of indirect composites. J Dent. 2017;59:18–25.
   PubMed Web of Science ®Google Scholar
• Kara O, Kara HB, Tobi ES, et al. Effect of various lasers on the bond strength of two zirconia ceramics. Photomed Laser Surg. 2015;33(2):69–76.
   PubMed Web of Science ®Google Scholar
• Ural Ç, Duran İ, Evmek B, et al. Light transmittance and surface roughness of a feldspathic ceramic CAD-CAM material as a function of different surface treatments. BMC Oral Health. 2016;17(1):16.
   PubMed Web of Science ®Google Scholar
• Bagheri H, Hooshmand T, Aghajani F. Effect of Ceramic Surface Treatments After Machine Grinding on the Biaxial Flexural Strength of Different CAD/CAM Dental Ceramics. J Dent (Tehran). 2015;12(9):621–629.
   PubMedGoogle Scholar
• Turp V, Akgungor G, Sen D, et al. Evaluation of surface topography of zirconia ceramic after Er:YAG laser etching. Photomed Laser Surg. 2014;32(10):533–539.
   PubMed Web of Science ®Google Scholar
• Usumez A, Hamdemirci N, Koroglu BY, et al. Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med Sci. 2013;28(1):259–266.
   PubMed Web of Science ®Google Scholar
• Egilmez F, Ergun G, Cekic-Nagas I, et al. Effect of surface modification on the bond strength between zirconia and resin cement. J Prosthodont. 2013;22(7):529–536.
   PubMedGoogle Scholar
• Akın H, Ozkurt Z, Kırmalı O, et al. Shear bond strength of resin cement to zirconia ceramic after aluminum oxide sandblasting and various laser treatments. Photomed Laser Surg. 2011;29(12):797–802.
   PubMed Web of Science ®Google Scholar
• Eversole LR, Rizoiu I, Kimmel AI. Pulpal response to cavity preparation by an erbium, chromium:YSGG laser-powered hydrokinetic system. J Am Dent Assoc. 1997;128(8):1099–1106.
   PubMed Web of Science ®Google Scholar
• Kara HB, Dilber E, Koc O, et al. Effect of different surface treatments on roughness of IPS Empress 2 ceramic. Lasers Med Sci. 2012;27(2):267–272.
   PubMed Web of Science ®Google Scholar
• Gökçe B, Ozpinar B, Dündar M, et al. Bond strengths of all-ceramics: acid vs laser etching. Oper Dent. 2007;32(2):173–178.
   PubMed Web of Science ®Google Scholar