References
- Dinwoodie JM. Editor. Chapter 1 in wood adhesives chemistry and technology. In Pizzi A. Properties and performance of wood adhesives. New York: Marcel Dekker; 1983, p. 1–58.
- Dunky M. Urea–formaldehyde (UF) adhesive resins for wood. Int J Adhes. 1998;18(2):95–107.
- Park BD, Kang EC, Park JY. Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea-formaldehyde resin and properties of particleboard. J Appl Polym Sci. 2006;101(3):1787–1792
- Ferra JMM. Optimization of urea-formaldehyde resins for the manufacture of wood-based panels. Diss. Universidade do Porto of Portugal; 2010
- Ferra JM, Mena PC, Martins J, et al. Optimization of the synthesis of urea-formaldehyde resins using response surface methodology. J Adhesion Sci Technol. 2010;24(8–10):1454–1471
- Hong MK, Park BD. Effect of urea-formaldehyde resin adhesive viscosity on plywood adhesion. J Korean Wood Sci Technol. 2017;45(2):223–231
- Leichti RJ, Hse CY, Tang RC. Effect of synthesis variables on tack in urea-formaldehyde resin. J Adhesion. 1988;25(1):31–44
- Xing C, Riedl B, Cloutier A, et al. Characterization of urea–formaldehyde resin penetration into medium density fiberboard fibers. J Wood Chem Technol. 2005;39(5):374–384
- Nuryawan A, Park BD, Singh AP. Penetration of urea–formaldehyde resins with different formaldehyde/urea mole ratios into softwood tissues. J Wood Chem Technol. 2014;48(5):889–902
- Henriques A, Ferra J, Cruz P, et al. Viscosity determination of amino resins during synthesis using near-infrared spectroscopy. Int Wood Products J. 2012;3(1):64–66.
- Mark H. Über die Entstehung und eigenschaften hochpolymer festkörper. In: Sanger R, editor. der feste körper. Leipzig: Hirzel; 1938, pp. 65–104.
- Houwink R. Zusammenhang zwischen viscosimetrisch und osmotisch bestimm-ten polymerisationsgraden bei hochpolymeren. J Prakt Chem. 1940;157(1–3):15–18
- García de la Torre J, Carrasco B. Universal size-independent quantities for the conformational characterization of rigid and flexible macromolecules. Prog Colloid Polym Sci. 1999;113:81–86.
- Masuelli M A. Mark-houwink parameters for aqueous-soluble polymers and biopolymers at various temperatures. J Polym Biopolym Phys Chem. 2014;2(2):37–43.
- Jeong B, Park BD. Effect of analytical parameters of gel permeation chromatography on molecular weight measurements of urea-formaldehyde resins. J Korean Wood Sci Technol. 2017;45(4):471–481.
- Park BD, Frihart CR, Yu Y, et al. Hardness evaluation of cured urea–formaldehyde resins with different formaldehyde/urea mole ratios using nanoindentation method. Eur Polym J. 2013;49(10):3089–3094
- Van Krevelen DW, Te Nijenhuis K. Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions. Amsterdam, Netherlands: Elsevier. 2009.
- Cui SW. Food carbohydrates: chemistry, physical properties, and applications. Boca Raton: CRC press, Taylor & Francis Group; 2005.