Advanced search
Publication Cover
Journal of Adhesion Science and Technology Volume 33, 2019 - Issue 7
Submit an article Journal homepage
95
Views
1
CrossRef citations to date
0
Altmetric
Article

Process variable effect on the strength of autoclave-bonded film adhesive joints

Shraddha JagatapDepartment of Mechanical Engineering, Fastening and Joining Institute (FAJRI), Oakland University, Rochester, MI, USA; ORCID Iconhttp://orcid.org/0000-0001-5064-9199
ORCID Icon,
Sayed A. NassarDepartment of Mechanical Engineering, Fastening and Joining Institute (FAJRI), Oakland University, Rochester, MI, USA; Correspondence[email protected]
,
Abbas RazavykiaDepartment of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, ItalyORCID Iconhttp://orcid.org/0000-0001-7460-8383
ORCID Icon &
Belingardi GiovanniDepartment of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
Pages 715-735 | Received 15 Aug 2018, Accepted 11 Dec 2018, Published online: 31 Jan 2019

References

  • Wenlong S, Xiaokai C, Lu W. Analysis of energy saving and emission reduction of vehicles using light weight materials. Energy Proced. 2016;88:889–893.
  • Symietz D. Structural Adhesive Bonding: The Most Innovative Joining Technique for Modern Lightweight Design, Safety and Modular Concepts-Progress Report. SAE Technical Paper. 2005;2005-01-1747.
  • Adderley CS. Adhesive bonding. Mater Des. 1988;9:287–293.
  • Yorkgitis EM, Marhevka VC, Lamon A. Bonding of Aluminum Structures with Advanced 1K and 2K Adhesives. SAE Technical Paper. 1995;950724.
  • Shroeder KJ. Adhesives for structural bonding of aluminum vehicles. Proc Int Conf Body Eng Body Assembly Manuf. 1994;10:10–30.
  • Barnes TA, Pashby IR. Joining techniques for aluminum spaceframes used in automobiles: Part I-solid and liquid phase welding. J Mater Process Tech. 2000;99:62–71.
  • McGrath G. Not sticking tradition-a guide to adhesive bonding. Bulletin 1991;3:32.
  • Kalpakjian S. Manufacturing engineering and technology. New York: Addison-Wesley; 1992.
  • Skovron JD, Prasad RR, Ulutan D, et al. Effect of thermal assistance on the joint quality. ASME J Manuf Sci Eng. 2015;137:051019-1∼8.
  • Hu P, Han X, Li WD, et al. Research on the static strength performance of adhesive single lap joints subjected to extreme temperature environment for automotive industry. Int J Adhes Adhes. 2013;41:119–126.
  • Silva Lf D, Lima RF, Teixeira RM, et al. Closed-form solutions for adhesively bonded joints. Development of the software for the design of adhesive joints. Portugal: University of do Porto; 2008.
  • Boubakri A, Haddar N, Elleuch K, et al. Impact of aging conditions on mechanical properties of thermoplastic polyurethane. Mater Design. 2010;31:4194–4201.
  • Riccio A, Russo A, Raimondo A, et al. A numerical/experimental study on the induction heating of adhesives for composite materials bonding. Mater Today Commun. 2018;15:203–213.
  • Nassar SA, Jagatap SR, Tardito M. 2016. Effect of cure temperature and cure pressure on autoclave-bonded polycarbonate single lap joint. Phoenix, AZ: ASME International Mechanical Engineering Congress and Exposition.
  • Montgomery DC. Introduction to statistical quality control. New York: John Wiley & Sons; 2009.
  • Lapique F, Redford K. Curing Effects on Viscosity and Mechanical Properties of a Commercial Epoxy Resin Adhesive. Int J Adhes Adhes. 2002;22:337–346.
  • Park SY, Choi WJ, Choi CH, et al. The effect of curing temperature on thermal, physical and mechanical characteristics of two types of adhesives for aerospace structures. J Adhes Sci Technol. 2018;32:1200–1223.
  • Li G, Lee-Sullivan P, Thring R. Determination of activation energy for glass transition of an epoxy adhesive using dynamic mechanical analysis. J Therm Anal Calorim. 2000;60:377–390.
  • Goglio L, Rezaei M, Rossetto M. Moisture degradation of open-faced single lap joints. J Adhes Sci Technol. 2014;28:1382–1393.
  • Garcia FG, Leyva ME, Simões AZ, et al. Durability of adhesives based on different epoxy/aliphatic amine networks. Int J Adhes Adhes. 2011;31:177–181.
  • Na J, Fan Y, Tan W, et al. Mechanical behavior of polyurethane adhesive bonded joints as a function of temperature and humidity. J Adhes Sci Technol. 2018;32:457–472.
  • Design-Expert software. version 11. Free version (www.statease.com).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.