Prime-and-rinse approach for improving the enamel micro-tensile bond strengths of self-etch adhesives

References

• Giannini M, Makishi P, Ayres AP. Self-etch adhesive systems: a literature review. Braz Dent J. 2015;26:3–10.
   PubMedGoogle Scholar
• Iovan G, Stoleriu S, Andrian S. Self-etch bonding systems: more reliable or more challenging for the practitioner? Int J Med Dent. 2017;21:189–195.
   Web of Science ®Google Scholar
• Yoshihara K, Hayakawa S, Nagaoka N, et al. Etching efficacy of self-etching functional monomers. J Dent Res. 2018;97:1010–1016.
   PubMed Web of Science ®Google Scholar
• Takamizawa T, Barkmeier WW, Tsujimoto A, et al. Influence of pre-etching times on fatigue strength of self-etch adhesives to enamel. J Adhes Dent. 2016;18:501–511.
   PubMed Web of Science ®Google Scholar
• Gu MM, Yu QS, Tan JW, et al. Improving bond strength of ground and intact enamel to mild self-etch adhesive by plasma treatment. Clin Plasma Med. 2016;4:29–33.
   Web of Science ®Google Scholar
• Pashley DH, Tay FR. Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater. 2001;17:430–444.
   PubMed Web of Science ®Google Scholar
• Kanemura N, Sano H, Tagami J. Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces. J Dent. 1999;27:523–530.
   PubMed Web of Science ®Google Scholar
• Rotta M, Bresciani P, Moura SK, et al. Effects of phosphoric acid pretreatment and substitution of bonding resin on bonding effectiveness of self-etching systems to enamel. J Adhes Dent. 2007;9:537–545.
   PubMed Web of Science ®Google Scholar
• De Munck J, Van Meerbeek B, Satoshi I, et al. Microtensile bond strengths of one- and two-step self-etch adhesives to bur-cut enamel and dentin. AM J Dent. 2003;16:414–420.
   PubMed Web of Science ®Google Scholar
• De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: Methods and results. J Dent Res. 2005;84:118–132.
   PubMed Web of Science ®Google Scholar
• Ayar MK. Comparative evaluation of immediate bond strength to enamel with one-step self-etch adhesives. Res J Pharm Biol Chem Sci. 2016;7:2014–2019.
   Web of Science ®Google Scholar
• Devarasa GM, Reddy VVS, Chaitra NL, et al. Self-etching adhesive on intact enamel, with and without pre-etching. Microsc Res Tech. 2012;75:650–654.
   PubMed Web of Science ®Google Scholar
• Li N, Nikaido T, Alireza S, et al. Phosphoric acid-etching promotes bond strength and formation of acid-base resistant zone on enamel. Oper Dent. 2013;38:82–90.
   PubMed Web of Science ®Google Scholar
• Van Meerbeek B, De Munck J, Yoshida Y, et al. Buonocore Memorial Lecture - Adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28:215–235.
   PubMed Web of Science ®Google Scholar
• Van Meerbeek B, Yoshihara K, Yoshida Y, et al. State of the art of self-etch adhesives. Dent Mater. 2011;27:17–28.
   PubMed Web of Science ®Google Scholar
• Szesz A, Parreiras S, Reis A, et al. Selective enamel etching in cervical lesions for self-etch adhesives: a systematic review and meta-analysis. J Dent. 2016;53:1–11.
   PubMed Web of Science ®Google Scholar
• Tsujimoto A, Barkmeier WW, Takamizawa T, et al. The effect of phosphoric acid pre-etching times on bonding performance and surface free energy with single-step self-etch adhesives. Oper Dent. 2016;41:441–449.
   PubMed Web of Science ®Google Scholar
• Taschner M, Nato F, Mazzoni A, et al. Influence of preliminary etching on the stability of bonds created by one-step self-etch bonding systems. Eur J Oral Sci. 2012;120:239–248.
   PubMed Web of Science ®Google Scholar
• Taschner M, Nato F, Mazzoni A, et al. Role of preliminary etching for one-step self-etch adhesives. Eur J Oral Sci. 2010;118:517–524.
   PubMed Web of Science ®Google Scholar
• Van Landuyt KL, Kanumilli P, De Munck J, et al. Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent. 2006;34:77–85.
   PubMed Web of Science ®Google Scholar
• Pashley DH, Tay FR, Breschi L, et al. State of the art etch-and-rinse adhesives. Dent Mater. 2011;27:1–16.
   PubMed Web of Science ®Google Scholar
• Yoshida Y, Yoshihara K, Nagaoka N, et al. Self-assembled nano-layering at the adhesive interface. J Dent Res. 2012;91:376–381.
   PubMed Web of Science ®Google Scholar
• Iwai H, Fujita K, Iwai H, et al. Development of MDP-based one-step self-etch adhesive-effect of additional 4-META on bonding performance. Dent Mater J. 2013;32:1–9.
   PubMed Web of Science ®Google Scholar
• Yoshihara K, Yoshida Y, Nagaoka N, et al. Adhesive interfacial interaction affected by different carbon-chain monomers. Dent Mater. 2013;29:888–897.
   PubMed Web of Science ®Google Scholar
• Zhang ZL, Wang XM, Zhang L, et al. The contribution of chemical bonding to the short- and long-term enamel bond strengths. Dent Mater. 2013;29:e103–EE12.
   PubMed Web of Science ®Google Scholar
• Tian F, Zhou L, Zhang Z, et al. Paucity of nanolayering in resin-dentin interfaces of MDP-based adhesives. J Dent Res. 2016;95:380–387.
   PubMed Web of Science ®Google Scholar
• Fu BP, Sun XM, Qian WX, et al. Evidence of chemical bonding to hydroxyapatite by phosphoric acid esters. Biomaterials. 2005;26:5104–5110.
   PubMed Web of Science ®Google Scholar
• Yoshida Y, Van Meerbeek B, Nakayama Y, et al. Adhesion to and decalcification of hydroxyapatite by carboxylic acids. J Dent Res. 2001;80:1565–1569.
   PubMed Web of Science ®Google Scholar
• Aguilar-Mendoza JA, Rosales-Leal JI, Rodriguez-Valverde MA, et al. Wettability and bonding of self-etching dental adhesives influence of the smear layer. Dent Mater. 2008;24:994–1000.
   PubMed Web of Science ®Google Scholar
• Wang XM, Wang CY, Zhang L, et al. Influence of priming time and primer’s concentrations on bovine enamel bond strengths. J Adhes Sci Technol. 2013;27:2558–2570.
   Web of Science ®Google Scholar
• Fukegawa D, Hayakawa S, Yoshida Y, et al. Chemical interaction of phosphoric acid ester with hydroxyapatite. J Dent Res. 2006;85:941–944.
   PubMed Web of Science ®Google Scholar
• Xu JQ, Liang B, Hoth-Hannig W, et al. Do phosphoric acid esters affect the immediate enamel bond strengths? J Adhes Sci Technol. 2016;30:2498–2510.
   Web of Science ®Google Scholar
• Zhang L, Wang WT, Wang CY, et al. Interaction of ACP and MDP and its effect on dentin bonding performance. J Mech Behav Biomed. 2019;[in press]
   Web of Science ®Google Scholar
• World Med Assoc. World Medical Association Declaration of Helsinki: ethical principles for medical research involving human subjects. JAMA. 2013;310:2191–2194.
   PubMed Web of Science ®Google Scholar
• Fowler CS, Swartz ML, Moore BK, et al. Influence of selected variables on adhesion testing. Dent Mater. 1992;8:265–269.
   PubMed Web of Science ®Google Scholar
• Stape THS, Tjaderhane L, Abuna G, et al. Optimization of the etch-and-rinse technique: new perspectives to improve resin–dentin bonding and hybrid layer integrity by reducing residual water using dimethyl sulfoxide pretreatments. Dent Mater. 2018;34:967–977.
   PubMed Web of Science ®Google Scholar
• Michaud PL, Prostho C, Mackenzie A. Compatibility between dental adhesive systems and dual-polymerizing composite resins. J Prosthet Dent. 2016;116:597–602.
   PubMed Web of Science ®Google Scholar
• Pashley DH, Carvalho RM, Sano H, et al. The microtensile bond test: a review. J Adhes Dent. 1999;1:299–309.
   PubMedGoogle Scholar
• Jacquot B, Durand JC, Farge P, et al. Influence of temperature and relative humidity on dentin and enamel bonding: a critical review of the literature. part 1. laboratory studies. J Adhes Dent. 2012;14:433–446.
   PubMed Web of Science ®Google Scholar
• Soderholm KJM, Soares F, Argumosa M, et al. Shear bond strength of one etch-and-rinse and five self-etching dental adhesives when used by six operators. Acta Odontol Scand. 2008;66:243–249.
   PubMed Web of Science ®Google Scholar
• Jiang Q, Pan HH, Liang B, et al. Effect of Saliva Contamination and Decontamination on Bovine Enamel Bond Strength of Four Self-etching Adhesives. Oper Dent. 2010;35:194–202.
   PubMed Web of Science ®Google Scholar
• Takamizawa T, Barkmeier WW, Sai K, et al. Influence of different smear layers on bond durability of self-etch adhesives. Dent Mater. 2018;34:246–259.
   PubMed Web of Science ®Google Scholar
• Tao L, Pashely DH, Boyd L. Effect of different types of smear layers on dentin and enamel shear bond strengths. Dent Mater. 1988;4:208–216.
   PubMed Web of Science ®Google Scholar
• Cardoso MV, Coutinho E, Ermis RB, et al. Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives. Dent Mater. 2008;24:492–501.
   PubMed Web of Science ®Google Scholar
• Eick JD, Wilko RA, Anderson CH, et al. Scanning electron microscopy of cut tooth surfaces and identification of debris by use of electron microprobe. J Dent Res. 1970;49:1359.
   Web of Science ®Google Scholar
• Wahle JJ, Wendt SL. Dentinal surface roughness: a comparison of tooth preparation techniques . J Prosthet Dent. 1993;69:160–164.
   PubMed Web of Science ®Google Scholar
• Ermis RB, De Munck J, Cardoso MV, et al. Bond strength of self-etch adhesives to dentin prepared with three different diamond burs. Dent Mater. 2008;24:978–985.
   PubMed Web of Science ®Google Scholar
• Watanabe T, Tsubota K, Takamizawa T, et al. Effect of prior acid etching on bonding durability of single-step adhesives. Oper Dent. 2008;33:426–433.
   PubMed Web of Science ®Google Scholar
• Ando S, Watanabe T, Tsubota K, et al. Effect of adhesive application methods on bond strength to bovine enamel. J Oral Sci. 2008;50:181–186.
   PubMedGoogle Scholar
• Mine A, De Munck J, Cardoso MV, et al. Dentin-smear remains at self-etch adhesive interface. Dent Mater. 2014;30:1147–1153.
   PubMed Web of Science ®Google Scholar
• Mahdan MH, Nakajima M, Foxton RM, et al. Combined effect of smear layer characteristics and hydrostatic pulpal pressure on dentine bond strength of HEMA-free and HEMA-containing adhesives. J Dent. 2013;41:861–871.
   PubMed Web of Science ®Google Scholar
• Thanatvarakorn O, Nakajima M, Prasansuttiporn T, et al. Effect of smear layer deproteinizing on resin-dentine interface with self-etch adhesive. J Dent. 2014;42:298–304.
   PubMed Web of Science ®Google Scholar
• Mine A, De Munck J, Cardoso MV, et al. Enamel-smear compromises bonding by mild self-etch adhesives. J Dent Res. 2010;89:1505–1509.
   PubMed Web of Science ®Google Scholar
• Shinoda Y, Nakajima M, Hosaka K, et al. Effect of smear layer characteristics on dentin bonding durability of HEMA-free and HEMA-containing one-step self-etch adhesives. Dent Mater J. 2011;30:501–510.
   PubMed Web of Science ®Google Scholar
• Suyama Y, Luhrs AK, De Munck J, et al. Potential smear layer interference with bonding of self-etching adhesives to dentin. J Adhes Dent. 2013;15:317–324.
   PubMed Web of Science ®Google Scholar
• Oliveira SSA, Pugach MK, Hilton JF, et al. The influence of the dentin smear layer on adhesion: a self-etching primer vs. a total-etch system. Dent Mater. 2003;19:758–767.
   PubMed Web of Science ®Google Scholar
• Takahashi A, Sato Y, Uno S, et al. Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater. 2002;18:263–268.
   PubMed Web of Science ®Google Scholar
• Lopes GC, Marson FC, Vieira LCC, et al. Composite bond strength to enamel with self-etching primers. Oper Dent. 2004;29:424–429.
   PubMed Web of Science ®Google Scholar
• Yoshida Y, Nagakane K, Fukuda R, et al. Comparative study on adhesive performance of functional monomers. J Dent Res. 2004;83:454–458.
   PubMed Web of Science ®Google Scholar
• Reis A, Grandi V, Carlotto L, et al. Effect of smear layer thickness and acidity of self-etching solutions on early and long-term bond strength to dentin. J Dent. 2005;33:549–559.
   PubMed Web of Science ®Google Scholar
• Ermis RB, Temel UB, Celik EU, et al. Clinical performance of a two-step self-etch adhesive with additional enamel etching in class III cavities. Oper Dent. 2010;35:147–155.
   PubMed Web of Science ®Google Scholar
• Bortolotto T, Ferrari M, Susin A, et al. Morphology of the smear layer after the application of simplified self-etch adhesives on enamel and dentin surfaces created with different preparation methods. Clin Oral Invest. 2009;13:409–417.
   PubMed Web of Science ®Google Scholar
• Hannig M, Bock H, Bott B, et al. Inter-crystallite nanoretention of self-etching adhesives at enamel imaged by transmission electron microscopy. Eur J Oral Sci. 2002;110:464–470.
   PubMed Web of Science ®Google Scholar
• Yoshida Y, Yoshihara K, Nagaoka N, et al. X-ray diffraction analysis of three-dimensional self-reinforcing monomer and its chemical interaction with tooth and hydroxyapatite. Dent Mater J. 2012;31:697–702.
   PubMed Web of Science ®Google Scholar
• Li N, Nikaido T, Takagaki T, et al. The role of functional monomers in bonding to enamel: Acid-base resistant zone and bonding performance. J Dent. 2010;38:722–730.
   PubMed Web of Science ®Google Scholar
• Yoshihara K, Yoshida Y, Hayakawa S, et al. Nanolayering of phosphoric acid ester monomer on enamel and dentin. Acta Biomater. 2011;7:3187–3195.
   PubMed Web of Science ®Google Scholar