Influence of fibers on bond strength of concrete exposed to elevated temperature

References

• Khoury GA. Effect of fire on concrete and concrete structures. Prog Struct Engng Mater. 2000;2:429–447.
   Google Scholar
• Behnood A, Ghandehari M. Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures. Fire Saf J. 2009;44:1015–1022.
   Web of Science ®Google Scholar
• Georgali B, Tsakiridis PE. Microstructure of fire-damaged concrete. A case study. Cem Concr Compos. 2005;27:255–259.
   Web of Science ®Google Scholar
• Sukontasukkul P, Worachet P, Smith S. Post-crack (or post-peak) flexural response and toughness of fiber reinforced concrete after exposure to high temperature. Construction Build Mater. 2010;24:1967–1974.
   Web of Science ®Google Scholar
• Anand N, Arulraj GP. Effect of grade of concrete on the performance of self-compacting concrete beams subjected to elevated temperatures. Fire Technol. 2014;50:1269–1284.
   Web of Science ®Google Scholar
• Morley PD. "Effects of elevated temperature on bond in reinforced concrete." University of Edinburgh, 1982.
   Google Scholar
• Lublóy É, György BL. Temperature effects on bond between concrete and reinforcing steel. Zbornik Gfs.. 2014;30:27–35.
   Google Scholar
• Poon CS, Shui ZH, Lam L. Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures. Cem Concr Res. 2004;34:2215–2222.
   Web of Science ®Google Scholar
• Suhaendi SL, Horiguchi T. Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition. Cem Concr Res. 2006;36:9672–1678.
   Web of Science ®Google Scholar
• ACE Committee 544. State-of-the-art report on fiber reinforced concrete. ACI Concr Int. 1982;4:9–30.
   Google Scholar
• Morley PD, Royles R. Response of the bond in reinforced concrete to high temperatures. Mag Concr Res. 1983;35:67–74.
   Web of Science ®Google Scholar
• ACI Committee 408. Bond Stress- the state of the art. ACI J. 1966;63;1161–1188.
   Google Scholar
• Tanyildizi H. Effect of temperature, carbon fibers, and silica fume on the mechanical properties of lightweight concretes. New Carbon Mater. 2008;23:339–344.
   Web of Science ®Google Scholar
• Bhat T, Chevali V, Liu X. Fire structural resistance of basalt fiber composite. Compos Part A Appl Sci Manuf. 2015;71:107–115.
   Web of Science ®Google Scholar
• Feng W, Lu Z. Effect of elevated temperature on the mechanical properties of basalt fibers and BFRP plates. Proceedings of the 6th Asia-Pacific Conference on FRP in Structures; 2017; Singpore; 156–157.
   Google Scholar
• Abbasi A, Hogg PJ. Temperature and environmental effects on glass fibre rebar: modulus, strength and interfacial bond strength with concrete. Compos Part B Eng. 2005;36:394–404.
   Web of Science ®Google Scholar
• Kalifa P, Chene G, Galle C. High-temperature behavior of HPC with polypropylene fibres: From spalling to microstructure. Cem Concr Res. 2001;31:1487–1499.
   Web of Science ®Google Scholar
• Khoury GA, Willoughby B. Polypropylene fibers in heated concrete. Part 1: molecular structure and materials behavior. Mag Concr Res. 2008;60:125–136.
   Web of Science ®Google Scholar
• Haddad RH, Al-Saleh RJ, Al-Akhras NM. Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete. Fire Saf J. 2008;43:334–343.
   Web of Science ®Google Scholar
• Faiyadh FI, Al-Ausi MA. Effect of elevated temperature on splitting tensile strength of fibre concrete. Int J Cem Compos Lightweight Concr. 1989;11:175–178. Aug 1
   Google Scholar
• Mallick PK. Fiber-reinforced composites: materials, manufacturing, and design. USA: CRC press;2007
   Google Scholar
• Mingchao W, Zuoguang Z, Yubin L, et al. Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites. J Reinforced Plastics Compos. 2008;27:393–407.
   Web of Science ®Google Scholar
• Li XE. Study on thermal resistance of basalt filament yarn. AMR. 2011;146:666–669.
   Google Scholar
• Sim J, Park C, Moon DY. Characteristics of basalt fiber as a strengthening material for concrete structures. Compos Part B Eng. 2005;36:504–512.
   Web of Science ®Google Scholar
• Singha K. A short review on basalt fiber. Int J Text Sci. 2012;1:19–28.
   Google Scholar
• Chen B, Liu J. Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperatures. Cem Concr Res. 2004;34:1065–1069.
   Web of Science ®Google Scholar
• Nahar S, Khan RA, Dey K. Comparative studies of mechanical and interfacial properties between jute and E-glass fiber-reinforced polypropylene composites. J Reinforced Plastics Compos. 2010;29:1078–1088.
   Web of Science ®Google Scholar
• Gupta VB, Vk K. Manufactured fibre technology, 457–479. London (UK): Chapman & Hall;1997
   Google Scholar
• Bergman TL, Incropera FP, Lavine AS, et al. Fundamentals of heat and mass transfer. 7th ed. USA: John Wiley & Sons;2011
   Google Scholar
• Aulia TB. Effects of polypropylene fibers on the properties of high-strength concretes. Germany: Institutes for Massivbau and Baustoffechnologi, University Leipzig; 2002, Lacer 7.
   Google Scholar
• Indian Standard Methods of Testing Bond in Reinforced Concrete Part 1 Pull-Out Test (2007) Bureau of Indian Standards, Manak Bhavan, New Delhi.
   Google Scholar
• FIB Bulletin No. 10. Bond of Reinforcement in Concrete, State of the Art. Report prepared by Task Group Bond Models, former CEB, Task Group 5.2.CH-1015, Lausanne, 2000.
   Google Scholar
• Sfikas IP, Trezos KG. Effect of composition variations on bond properties of self compacting concrete specimens. Constr Build Mater. 2013;41:252–262.
   Web of Science ®Google Scholar
• Foroughi A, Dilmaghani S, Famili H. Bond strength of reinforcement steel in self-compacting concrete. Int J Civ Eng. 2008;6:24–33.
   Web of Science ®Google Scholar
• Noumowe AN, Clastres P, Debicki G, Costaz J-L. Transient heating effect on high strength concrete. Nucl Eng Des. 1996;166:99–108.
   Web of Science ®Google Scholar
• Royles R, Morley PD. Further responses of the bond in reinforced concrete to high temperatures. Mag Concr Res. 1983;35:157–163.
   Web of Science ®Google Scholar
• Morley PD, Royles R. The influence of high temperature on the bond in reinforced concrete. Fire Saf J. 1980;2:243–255.
   Web of Science ®Google Scholar
• Arioz O. Effects of elevated temperatures on properties of concrete. Fire Saf J. 2007;42:516–522.
   Web of Science ®Google Scholar
• Diederichs U, Schneider U. Bond strength at high temperatures. Mag Concr Res. 1981;33:75–84.
   Web of Science ®Google Scholar
• Chan YN, Peng GF, Anson M. Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures. Cem Concr Compos. 1999;21:23–27.
   Web of Science ®Google Scholar
• Ezeldin A, Balaguru P. Bond behavior of normal and high-strength fiber reinforced concrete. Mater J. 1989;86:515–524.
   Web of Science ®Google Scholar
• Jiang C, Fan K, Wu F, et al. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete. Mater Des. 2014;58:187–193.
   Web of Science ®Google Scholar
• Mallick PK. Fiber-Reinforced Composites: Materials, Manufacturing and Design. 3rd Edition. London, UK: CRC Press; 2007
   Google Scholar
• Wei B, Cao H, Song S. RETRACTED: environmental resistance and mechanical performance of basalt and glass fibers. Mater Sci Eng A. 2010;527:4708–4715.
   Web of Science ®Google Scholar
• Yamasaki Y, Masuda Y, Tanano H, et al. Fundamental properties of continuous fiber bars. International Concrete Abstracts Portal (ACI). 1993;138:715–730.
   Google Scholar
• Burgoyne CJ. Aramid fibers for civil engineering applications. In: Doran DK, editor. Construction materials reference book. UK: Butterworth-Heinemann; 1992
   Google Scholar
• Derombise G, Schoors LVV, Messou MF, et al. Influence of finish treatment on the durability of aramid fibers aged under an alkaline environment. J Appl Polym Sci. 2010;117:888–898.
   Web of Science ®Google Scholar
• Hannant DJ. Durability of polypropylene fibers in Portland cement-based composites: eighteen years of data. Cem Concr Res. 1998;28:1809–1817.
   Web of Science ®Google Scholar
• Toledo Filho RD, Sanjuan MA. Effect of low modulus sisal and polypropylene fibre on the free and restrained shrinkage of mortars at early age. Cem Concr Res. 1999;29:1597–1604.
   Web of Science ®Google Scholar
• Gemert DV, Czarnecki L, Lukowski P, et al. Cement concrete and concrete–polymer composites. Cem Concr Res. 2005;27:926–933.
   Web of Science ®Google Scholar
• Schulze J. Influence of water-cement ratio and cement content on the properties of polymer-modified mortars. Cem Concr Res. 1999;29:909–915.
   Web of Science ®Google Scholar
• Landucci G, Rossi F, Nicolella C, et al. Design and testing of innovative materials for passive fire protection. Fire Saf J. 2009;44:1103–1109.
   Web of Science ®Google Scholar
• Nishida A, Yamazaki N, Inoue H, et al. Study on the Properties of High Strength Concrete with Short Polypropylene Fibres for Spalling Resistance. In Sakai K., Banthia N., Gjorv OE. editors. proceedings of the Symposium Concrete under Severe Conditions 2; 1995, Saporo, Japan; 1141–1150.
   Google Scholar
• Bošnjak J, Ožbolt J, Hahn R. Permeability measurement on high strength concrete without and with polypropylene fibers at elevated temperatures using a new test setup. Cem Concr Res. 2013;53:104–111.
   Web of Science ®Google Scholar
• Özbay E, Türker HT, Balçıkanlı M, et al. Effect of Fiber Types and Elevated Temperatures on the Bond Characteristic of Fiber Reinforced Concretes. Wor Acad Sci. Eng. Technol. Int J Civ Environ Struct Construction Archit Eng. 2015;9:549–553.
   Google Scholar
• Ozawa M, Morimoto H. Effects of various fibers on high-temperature spalling in high-performance concrete. Construction Build Mater. 2014;71:83–92.
   Web of Science ®Google Scholar
• Khoury GA. Polypropylene fibers in heated concrete. Part 2: pressure relief mechanisms and modelling criteria. Mag Concr Res. 2008;60:189–204.
   Web of Science ®Google Scholar
• Shah SP. Do fibers increase the tensile strength of cement-based matrix? Mater J. 1992;88:595–602.
   Web of Science ®Google Scholar
• Morsy MS, Alsayed SH, Aqel M. Effect of elevated temperature on mechanical properties and microstructure of silica flour concrete. Int J Civ. Environ Eng. 2010;10:1–6.
   Google Scholar
• Anand N, Arulraj G, Aravindhan C. Stress strain behavior of Normal compacting and Self compacting concrete under elevated temperatures. J Struct Fire Eng. 2014;5:63–75.
   Google Scholar
• Godwin A, Anand N, Prince Arulraj G. Influence of mineral admixtures on mechanical properties of self-compacting concrete under elevated temperature. Fire Mater. 2016;40:940–958.
   Web of Science ®Google Scholar