References
- Norajitra P, Giniyatulin R, Holstein N, et al. Status of He-cooled divertor development for DEMO. Fusion Eng Des. 2005;75–79:307–311.
- Dux R, Bobkov V, Fedorczak N, et al. Tungsten erosion at the ICRH limiters in ASDEX upgrade. J Nucl Mater. 2007;363–365:112–116.
- Zhou ZJ, Du J, Song SX, et al. Microstructural characterization of W/Cu functionally graded materials produced by a one-step resistance sintering method. J Alloys Compounds. 2007;428:0–150.
- Ukai S, Okuda T, Fujiwara M, et al. Characterization of high temperature creep properties in recrystallized 12Cr-ODS ferritic steel claddings. J Nucl Sci Technol. 2002;39:872–879.
- Kim TK, Bae CS, Kim DH, et al. Microstructural observation and tensile isotropy of an austenitic ODS steel. Nucl Eng Technol. 2008;40:305–310.
- Cho HS, Ohkubo H, Iwata N, et al. Improvement of compatibility of advanced ferritic steels with super critical pressurized water toward a higher thermally efficient water-cooled blanket system. Fusion Eng Des. 2006;81:1071–1076.
- Yamashita S, Akasaka N, Ukai S, et al. Microstructural development of aheavily neutron-irradiated ODS ferritic steel (MA957) at elevated temperature. J Nucl Mater. 2007;367–370:202–207.
- Norajitra P, Boccaccini LV, Gervash A, et al. Development of a helium-cooled divertor: material choice and technological studies. J Nucl Mater. 2007;367–370:1416–1421.
- Norajitra P, Abdel-Khalik SI, Giancarli LM, et al. Divertor conceptual designs for a fusion power plant. Fusion Eng Des. 2008; 83:893–902.
- Zonghui Y, Yifu S, Xiaoquan L, et al. Transient liquid phase bonding between tungsten and stainless steel 316L. Trans Nonferrous Metals Soc China. 2012;22:2784–2789.
- Zhong Z, Hinoki T, Kohyama A, et al. Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer. Mater Sci Eng A. 2009;518:167–173.
- Cai Q, Liu W, Ma Y, et al. Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten-steel joint using a V/Cu composite barrier interlayer. Int J Refractory Metals Hard Mater. 2015;48:312–317.
- Seiler P, BäKer M, RöSler J. Multi-scale failure mechanisms of thermal barrier coating systems. Comput Mater Sci. 2013;80:(Complete):27–34.
- Zhong Z, Hinoki T, Nozawa T, et al. Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer. J Alloys Compounds. 2010;489:545–551.
- Basuki WW, Aktaa J. Investigation of tungsten/EUROFER97 diffusion bonding using Nb interlayer. Fusion Eng Des. 2011;86:2585–2588.
- Basuki WW, Aktaa J. Diffusion bonding between W and EUROFER97 using V interlayer. J Nucl Mater. 2012;429:335–340.
- Wang J-C, Wang W, Wei R, et al. Effect of Ti interlayer on the bonding quality of W and steel HIP joint. J Nucl Mater. 2017;485:8–14.
- Chen H-Y, Luo L-M, Zhang J, et al. Investigation on W/Fe diffusion bonding using Ti foil and Ti powder interlayer by SPS. J Nucl Mater. 2015;467:566–571.
- Rosinski M, Kruszewski MJ, et al. W/steel joint fabrication using the pulse plasma sintering (PPS) method. Fusion Eng Des. 2011;86:2573–2576.
- Yu H, Sanday SC, Rath BB. Residual stresses in ceramic-interlayer-metal joints. J Am Ceramic Society. 1993;76:1661–1664.
- Rubin G, Finel A. Application of first-principles methods to binary and ternary alloy phase diagram predictions. J Phys Condens Matter. 1995;7:3139–3152.
- Raghavan V. Phase diagrams of ternary iron alloys, part 1, ASM International, Materials Park, Ohio, 1987.
- Ghosh M, Kundu S, Chatterjee S, et al. Influence of interface microstructure on the strength of the transition joint between Ti-6Al-4V and stainless steel. Metall Mat Trans A. 2005;36:1891–1899.
- Kundu S, Chatterjee S, Olson D, et al. Effects of intermetallic phases on the bond strength of diffusion-bonded joints between titanium and 304 stainless steel using nickel interlayer. Metall Mat Trans A. 2007;38:2053–2060.