Influence of phosphoric acid etching on the dentin bond durability of universal adhesives

References

• Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res. 1955;34:849–853.
   PubMedGoogle Scholar
• De Munck J, Mine A, Poitevin A, et al. Meta-analytical review of parameters involved in dentin bonding. J Dent Res. 2012;91:351–357.
   PubMed Web of Science ®Google Scholar
• Matsui N, Takagaki T, Sadr A, et al. The role of MDP in a bonding resin of a two-step self-etching adhesive system. Dent Mater J. 2015;34:227–233.
   PubMed Web of Science ®Google Scholar
• Giannini M, Makishi P, Ayres AP, et al. Self-etch adhesive systems: a literature review. Braz Dent J. 2015;26:3–10.
   PubMedGoogle Scholar
• Fu J, Pan F, Kakuda S, et al. The effect of air-blowing duration on all-in-one systems. Dent Mater J. 2012;31:1075–1081.
   PubMed Web of Science ®Google Scholar
• Freeman R, Varanasi S, Meyers IA, et al. Effect of air abrasion and thermocycling on resin adaptation and shear bond strength to dentin for an etch-and-rinse and self-etch resin adhesive. Dent Mater J. 2012;31:180–188.
   PubMed Web of Science ®Google Scholar
• Özcan E, Çetin AR, Tunçdemir AR, et al. The effect of luting cement thicknesses on the push-out bond strength of the fiber posts. Acta Odontol Scand. 2013;71:703–709.
   PubMed Web of Science ®Google Scholar
• Rosa WL, Piva E, Silva AF. Bond strength of universal adhesives: a systematic review and meta-analysis. J Dent. 2015;43:765–776.
   PubMed Web of Science ®Google Scholar
• Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new ‘multi-mode' adhesive to enamel and dentine. J Dent. 2012;40:475–484.
   PubMed Web of Science ®Google Scholar
• Muñoz MA, Sezinando A, Luque-Martinez I, et al. Influence of a hydrophobic resin coating on the bonding efficacy of three universal adhesives. J Dent. 2014;42:595–602.
   PubMed Web of Science ®Google Scholar
• Wagner A, Wendler M, Petschelt A, et al. Bonding performance of universal adhesives in different etching modes. J Dent. 2014;42:800–807.
   PubMed Web of Science ®Google Scholar
• Sadr A, Shimada Y, Tagami J. Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems. Dent Mater. 2007;23:1114–1119.
   PubMed Web of Science ®Google Scholar
• Sadr A, Ghasemi A, Shimada Y, et al. Effects of storage time and temperature on the properties of two self-etching systems. J Dent. 2007;35:218–225.
   PubMed Web of Science ®Google Scholar
• Grégoire G, Dabsie F, Dieng-Sarr F, et al. Solvent composition of one-step self-etch adhesives and dentine wettability. J Dent. 2011;39:30–39.
   PubMed Web of Science ®Google Scholar
• Vermelho PM, Reis AF, Ambrosano GM, et al. Adhesion of multimode adhesives to enamel and dentin after one year of water storage. Clin Oral Invest. 2016;21:1707–1715.
   PubMed Web of Science ®Google Scholar
• El-Deeb HA, Badran O, Mobarak EH. One-year adhesive bond durability to coronal and radicular dentin under intrapulpal pressure simulation. Oper Dent. 2015;40:540–547.
   PubMed Web of Science ®Google Scholar
• Wei S, Sadr A, Shimada Y, et al. Effect of caries-affected dentin hardness on the shear bond strength of current adhesives. J Adhes Dent. 2008;10:431–440.
   PubMed Web of Science ®Google Scholar
• Hariri I, Shimada Y, Sadr A, et al. The effects of aging on shear bond strength and nanoleakage expression of an etch-and-rinse adhesive on human enamel and dentin. J Adhes Dent. 2012;14:235–243.
   PubMed Web of Science ®Google Scholar
• Moosavi H, Hariri I, Sadr A, et al. Effects of curing mode and moisture on nanoindentation mechanical properties and bonding of a self-adhesive resin cement to pulp chamber floor. Dent Mater. 2013;29:708–717.
   PubMed Web of Science ®Google Scholar
• Jang JH, Lee MG, Woo SU, et al. Comparative study of the dentin bond strength of a new universal adhesive. Dent Mater J. 2016;35:606–612.
   PubMed Web of Science ®Google Scholar
• El-Askary FM, Nassif MS, Andrade AM, et al. Effect of surface area and air-drying distance on shear bond strength of etch-and-rinse adhesive. Braz Oral Res. 2012;26:418–423.
   PubMed Web of Science ®Google Scholar
• Takamizawa T, Barkmeier WW, Tsujimoto A, et al. Effect of phosphoric acid pre-etching on fatigue limits of self-etching adhesives. Oper Dent. 2015;40:379–395.
   PubMed Web of Science ®Google Scholar
• Nurrohman H, Nikaido T, Takagaki T, et al. Apatite crystal protection against acid-attack beneath resin-dentin interface with four adhesives: TEM and crystallography evidence. Dent Mater. 2012;28:e89–98.
   PubMed Web of Science ®Google Scholar
• Loguercio AD, Salvalaggio D, Piva AE, et al. Adhesive temperature: effects on adhesive properties and resin-dentin bond strength. Oper Dent. 2011;36:293–303.
   PubMed Web of Science ®Google Scholar
• Sai K, Shimamura Y, Takamizawa T, et al. Influence of degradation conditions on dentin bonding durability of three universal adhesives. J Dent. 2016;54:56–61.
   PubMed Web of Science ®Google Scholar
• Taira Y, Imai Y. Review of methyl methacrylate (MMA)/tributylborane (TBB)-initiated resin adhesive to dentin. Dent Mater J. 2014;33:291–304.
   PubMed Web of Science ®Google Scholar
• Ikemura K, Jogetsu Y, Shinno K, et al. Effects of a newly designed HEMA-free, multi-purpose, single-bottle, self-etching adhesive on bonding to dental hard tissues, zirconia-based ceramics, and gold alloy. Dent Mater J. 2011;30:616–625.
   PubMed Web of Science ®Google Scholar
• Zhang ZY, Tian FC, Niu LN, et al. Defying ageing: an expectation for dentine bonding with universal adhesives? J Dent. 2016;45:43–52.
   PubMed Web of Science ®Google Scholar
• Saikaew P, Matsumoto M, Chowdhury A, et al. Does shortened application time affect long-term bond strength of universal adhesives to dentin? Oper Dent. 2018;43:549–558.
   PubMed Web of Science ®Google Scholar
• Mazzoni A, Pashley DH, Nishitani Y, et al. Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials. 2006;27:4470–4476.
   PubMed Web of Science ®Google Scholar
• Pashley DH, Tay FR, Breschi L, et al. State of the art etch-and-rinse adhesives. Dent Mater. 2011;27:1–16.
   PubMed Web of Science ®Google Scholar
• Mazzoni A, Scaffa P, Carrilho M, et al. Effects of etch-and-rinse and self-etch adhesives on dentin MMP-2 and MMP-9. J Dent Res. 2013;92:82–86.
   PubMed Web of Science ®Google Scholar
• Ansari ZJ, Sadr A, Moezizadeh M, et al. Effects of one-year storage in water on bond strength of self-etching adhesives to enamel and dentin. Dent Mater J. 2008;27:266–272.
   PubMed Web of Science ®Google Scholar
• Bista B, Nakashima S, Nikaido T, et al. Adsorption behavior of methacryloyloxydecyl dihydrogen phosphate on an apatite surface at neutral pH. Eur J Oral Sci. 2016;124:195–203.
   PubMed Web of Science ®Google Scholar
• Turkistani A, Nakashima S, Shimada Y, et al. Microgaps and demineralization progress around composite restorations. J Dent Res. 2015;94:1070–1077.
   PubMed Web of Science ®Google Scholar