References
- Krishnaswamy RK. Analysis of ductile and brittle failures from creep rupture testing of high-density polyethylene (HDPE) pipes. Polymer. 2005;46:11664–11672.
- Ščetar M, Kurek M, Galić K. Trends in meat and meat products packaging – a review. Croat J Food Sci Technol. 2010;2:32–48.
- Moro T, Takatori Y, Ishihara K, et al. Surface grafting of artificial joints with a biocompatible polymer for preventing periprosthetic osteolysis. Nat Mater. 2004;3:829–836.
- Booij K, Hofmans HE, Fischer CV, et al. Temperature-dependent uptake rates of nonpolar organic compounds by semipermeable membrane devices and low-density polyethylene membranes. Environ Sci Technol. 2003;37:361–366.
- He HZ, Xue F, Jia PF, et al. Linear low-density polyethylene/poly(ethylene terephthalate) blends compatibilization prepared by an eccentric rotor extruder: a morphology, mechanical, thermal, and rheological study. J Appl Polym Sci. 2018;135:46489.
- Yao F, Wu Q, Liu H, et al. Rice straw fiber reinforced high density polyethylene composite: effect of coupled compatibilizating and toughening treatment. J Appl Polym Sci. 2011;119:2214–2222.
- Kurtz SM, Muratoglu OK, Evans M, et al. Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty. Biomaterials. 1999;20:1659–1688.
- Peacock AJ. Handbook of polyethylene: structures: properties, and applications. Boca Ranton, FL: CRC Press; 2000.
- Shen S, Henry A, Tong J, et al. Polyethylene nanofibers with very high thermal conductivities. Nat Nanotechnol. 2010;5:251–255.
- Yoneda H, Nishimura Y, Doi Y, et al. Development of microporous PE films to improve lithium ion batteries. Polym J. 2010;42:425–437.
- Todd AD, McEneany RJ, Topolkaraev VA, et al. Reactive compatibilization of poly(ethylene terephthalate) and high-density polyethylene using amino-telechelic polyethylene. Macromolecules. 2016;49:8988–8994.
- Su J, Zhang J. Comparison of rheological, mechanical, electrical properties of HDPE filled with BaTiO3 with different polar surface tension. Appl Surf Sci. 2016;388:531–538.
- Takase S, Uchida HT, Yagi A, et al. Adhesion of polyethylene/polyethylene terephthalate (PE/PET) laminated sheets by homogeneous low potential electron beam irradiation (HLEBI) prior to assembly and hot-press above melting point. Mater Trans. 2017;58:1055–1062.
- Brewis DM, Dahm RH. A review of electrochemical pretreatments of polymers. Int J Adhes Adhes. 2001;21:397–409.
- Švorčík V, Kolářová K, Slepička P, et al. Modification of surface properties of high and low density polyethylene by Ar plasma discharge. Polym Degrad Stab. 2006;91:1219–1225.
- Pascual M, Sanchis R, Sánchez L, et al. Surface modification of low density polyethylene (LDPE) film using corona discharge plasma for technological applications. J Adhes Sci Technol. 2008;22:1425–1442.
- Severini F, Landro LD, Galfetti L, et al. Flame surface modification of polyethylene sheets. Macromol Symp. 2002;181:225–243.
- Shin J, Liu X, Chikthimmah N, et al. Polymer surface modification using UV treatment for attachment of natamycin and the potential applications for conventional food cling wrap (LDPE). Appl Surf Sci. 2016;386:276–284.
- Wang L, Gao S, Wang J, et al. Surface modification of UHMWPE fibers by ozone treatment and UV grafting for adhesion improvement treatment and UV grafting for adhesion improvement. J Adhes. 2018;94:30–45.
- Nam K, Iwata T, Kimura T, et al. Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device. J Appl Polym Sci. 2014;131:40885.
- Yao S. Crystalline supramolecular interaction of side chain crystalline polymer and their future. Kobunshi Ronbunshu. 2016;73:139–146.
- Miho Y, Hirai S, Nakano R, et al. Modification of polyethylene using side-chain crystalline block copolymer and evaluation of hydrophilicity. Polym J. 2018;50:439–445.
- Nakano R, Sekiguchi H, Yao S. Polyethylene surface modification by side chain crystalline block copolymer. Macromol Symp. 2015;349:44–50.
- Guo Z, Li S, Liu X, et al. Epitaxial crystallization of isotactic poly(methyl methacrylate) from different states on highly oriented polyethylene thin film. J Phys Chem B. 2018;122:9425–9433.
- Miao W, Zhu H, Duan T, et al. High-density polyethylene crystals with double melting peaks induced by ultra-high-molecular-weight polyethylene fibre. R Soc Open Sci. 2018;5:180394.
- Fu Z, Liu M, Xu J, et al. Surface modification of linear low-density polyethylene film by amphiphilic graft copolymers based on poly(higher α-olefin)-graft-poly(ethylene glycol). J Appl Polym Sci. 2011;119:1111–1121.
- Sun Y, Li H, Huang Y, et al. Epitaxial crystallization of poly(butylene adipate) on highly oriented polyethylene thin film. Macromolecules. 2005;38:2739–2743.
- van Krevelen DW, Te Nijienhuis K. Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions. 4th ed. Amsterdam (Netherlands): Elsevier Science; 2009.
- Hernandez Y, Lotya M, Rickard D, et al. Measurement of multicomponent solubility parameters for graphene facilitates solvent discovery. Langmuir. 2010;26:3208–3213.