Formulation of cohesive failure load for bonded single lap joints using coupled elasto-plastic stress-diffusion model

References

• Brockmann W, Geiß PL, Klingen J, et al. Adhesive bonding. KGaA Weinheim: Wiley-VCH Verlag GmbH & Co.; 2009.
   Google Scholar
• United States Department of Transportation. Handbook-Airframe AMT. Oklahoma City (OK): Federal Aviation Administration; 2012. p. 13–22.
   Google Scholar
• Dickson JN, Hsu T-M, McKinney JM. Development of an understanding of the fatigue phenomena of bonded and bolted joints in advanced filamentary composite materials. Vol. 1. Analysis methods. Marietta: Lockheed-Georgia Co; 1972.
   Google Scholar
• Grimes GC, Greimann L, Wah T, et al. The development of nonlinear analysis methods for bonded joints in advanced filamentary composite structures San Antonio (TX): Southwest Research Inst; 1972.
   Google Scholar
• Hart-Smith LJ. Adhesive-bonded single-lap joints. Hampton (VA): Langley Research Center; 1973.
   Google Scholar
• Hart-Smith L. Adhesive-bonded double-lap joints. National Aeronautics and Space Administration; 1973.
   Google Scholar
• Grant P. Strength and stress analysis of bonded joints. Preston: British Aerospace; 1976;
   Google Scholar
• Volkersen O. Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten. Luftfahrtforschung. 1938;15(1/2):41–47.
   Google Scholar
• Delale F, Erdogan F, Aydinoglu M. Stresses in adhesively bonded joints: a closed-form solution. J Composite Mater. 1981;15(3):249–271.
   Google Scholar
• Bigwood D, Crocombe A. Non-linear adhesive bonded joint design analyses. Int J Adhes Adhes. 1990;10(1):31–41.
   Web of Science ®Google Scholar
• Bigwood D, Crocombe A. Elastic analysis and engineering design formulae for bonded joints. Int J Adhes Adhes. 1989;9(4):229–242.
   Web of Science ®Google Scholar
• Tong L. Bond strength for adhesive-bonded single-lap joints. Acta Mechanica. 1996;117(1–4):101–113.
   Web of Science ®Google Scholar
• Grimes G, Greimann L. Analysis of discontinuities, edge effects, and joints (in composite structures). Composite Mater. 1975;8:135–230.
   Google Scholar
• Crocombe A, Bigwood D. Development of a full elasto-plastic adhesive joint design analysis. J Strain Anal Eng Design. 1992;27(4):211–218.
   Web of Science ®Google Scholar
• Wang R, Cui J, Sinclair A, et al. Strength of adhesive joints with adherend yielding: I. Analytical model. J Adhes. 2003;79(1):23–48.
   Web of Science ®Google Scholar
• da Silva LFM, Öchsner A. Modeling of adhesively bonded joints. Springer, Berlin; 2008.
   Google Scholar
• da Silva LF, das Neves PJ, Adams R, et al. Analytical models of adhesively bonded joints—part I: literature survey. Int J Adhes Adhes. 2009;29(3):319–330.
   Web of Science ®Google Scholar
• da Silva LF, das Neves PJ, Adams R, et al. Analytical models of adhesively bonded joints—part II: comparative study. Int J Adhes Adhes. 2009;29(3):331–341.
   Web of Science ®Google Scholar
• Wahab MA, Hilmy I, Ashcroft I, et al. Damage parameters of adhesive joints with general triaxiality, part I: finite element analysis. J Adhes Sci Technol. 2011;25(9):903–923.
   Web of Science ®Google Scholar
• Wahab MA, Hilmy I, Ashcroft I, et al. Damage parameters of adhesive joints with general triaxiality, part 2: scarf joint analysis. J Adhes Sci Technol. 2011;25(9):925–947.
   Web of Science ®Google Scholar
• Hafiz T, Abdel-Wahab M, Crocombe A, et al. Mixed-mode fatigue crack growth in FM73 bonded joints. Int J Adhes Adhes. 2013;40:188–196.
   Web of Science ®Google Scholar
• Rudawska A, Malczarski M, Stančeková D, et al. Mechanical properties of hand-making polyester composites. Adv Sci Technol Res J. 2018;12(2):112–120.
   Web of Science ®Google Scholar
• Rudawska A, Wahab MA. The effect of cataphoretic and powder coatings on the strength and failure modes of EN AW-5754 aluminium alloy adhesive joints. Int J Adhes Adhes. 2019;89:40–50.
   Web of Science ®Google Scholar
• Nassar SA, Mazhari E. A coupled shear stress-diffusion model for adhesively bonded single lap joints. J Appl Mech. 2016;83(10):101006.
   Web of Science ®Google Scholar
• Mazhari E, Nassar SA, editors. Modeling of moisture diffusion effect on peel and sheer stresses in adhesively bonded single lap joints under shear-tensile loading. ASME 2017. International Mechanical Engineering Congress and Exposition; 2017: American Society of Mechanical Engineers.
   Google Scholar
• Mazhari E, Nassar SA. A coupled peel and shear stress-diffusion model for adhesively bonded single lap joints. J Manufact Sci Eng. 2017;139(9):091007.
   Web of Science ®Google Scholar
• Crank J. The mathematics of diffusion. Oxford University Press Inc., New York; 1979.
   Google Scholar
• Timoshenko SP, Woinowsky-Krieger S. Theory of plates and shells. McGraw-Hill, New York; 1959.
   Google Scholar
• Wahab MA, Crocombe A, Beevers A, et al. Coupled stress-diffusion analysis for durability study in adhesively bonded joints. Int J Adhes Adhes. 2002;22(1):61–73.
   Web of Science ®Google Scholar