The effect of nitrogen plasma treatment on adhesive properties of PEEK

References

• Awaja F, Zhang S, James N, et al. Enhanced autohesive bonding of polyetheretherketone (PEEK) for biomedical applications using a methane/oxygen plasma treatment. Plasma Processes Polym. 2010;7(12):1010–1021.
   Web of Science ®Google Scholar
• Skirbutis G, Dzingutė A, Masiliūnaitė V, et al. A review of PEEK polymer’s properties and its use in prosthodontics. Stomatologija. 2017;19(1):19–23.
   PubMedGoogle Scholar
• Kurtz SM, Devine JN. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials. 2007;28(32):4845–4869.
   PubMed Web of Science ®Google Scholar
• Lee WT, Koak JY, Lim YJ, et al. Stress shielding and fatigue limits of poly-ether-ether-ketone dental implants. J Biomed Mater Res Part B Appl Biomater. 2012;100(4):1044–1052.
   PubMed Web of Science ®Google Scholar
• Taufall S, Eichberger M, Schmidlin PR, et al. Fracture load and failure types of different veneered polyetheretherketone fixed dental prostheses. Clin Oral Invest. 2016;20(9):2493–2500.
   PubMed Web of Science ®Google Scholar
• Behr M, Rosentritt M, Lang R, et al. Glass fiber-reinforced abutments for dental implants. A pilot study. Clin Oral Implants Res. 2001;12(2):174–178.
   PubMed Web of Science ®Google Scholar
• Stawarczyk B, Beuer F, Wimmer T, et al. Polyetheretherketone—a suitable material for fixed dental prostheses? J Biomed Mater Res. 2013;101(7):1209–1216.
   Web of Science ®Google Scholar
• Stawarczyk B, Thrun H, Eichberger M, et al. Effect of different surface pretreatments and adhesives on the load-bearing capacity of veneered 3-unit PEEK FDPs. J Prosthet Dent. 2015;114(5):666–673.
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Preis V, Behr M, et al. Shear bond strength between veneering composite and PEEK after different surface modifications. Clin Oral Invest. 2015;19(3):739–744.
   PubMed Web of Science ®Google Scholar
• Kern M, Lehmann F. Influence of surface conditioning on bonding to polyetheretherketon (PEEK). Dent Mater. 2012;28(12):1280–1283.
   PubMed Web of Science ®Google Scholar
• Stawarczyk B, Taufall S, Roos M, et al. Bonding of composite resins to PEEK: the influence of adhesive systems and air-abrasion parameters. Clin Oral Investig. 2018;22(2):763–771.
   PubMed Web of Science ®Google Scholar
• Tsuka H, Morita K, Kato K, et al. Effect of laser groove treatment on shear bond strength of resin-based luting agent to polyetheretherketone (PEEK). J Prosthodont Res. 2019;63(1):52–57.
   PubMed Web of Science ®Google Scholar
• Çulhaoğlu AK, Özkır SE, Şahin V, et al. Effect of various treatment modalities on surface characteristics and shear bond strengths of polyetheretherketone-based core materials. J Prosthodont. 2020;29(2):136–141.
   PubMedGoogle Scholar
• Chaijareenont P, Prakhamsai S, Silthampitag P, et al. Effects of different sulfuric acid etching concentrations on PEEK surface bonding to resin composite. Dent Mat J. 2018;37(3):385–392.
   PubMed Web of Science ®Google Scholar
• Wiącek AE, Terpiłowski K, Jurak M, et al. Low-temperature air plasma modification of chitosan-coated PEEK biomaterials. Polym Test. 2016;50:325–334.
   Web of Science ®Google Scholar
• Bötel F, Zimmermann T, Sütel M, et al. Influence of different low-pressure plasma process parameters on shear bond strength between veneering composites and PEEK materials. Dent Mater. 2018;34(9):e246–e254.
   PubMed Web of Science ®Google Scholar
• Younis M, Unkovskiy A, ElAyouti A, et al. The effect of various plasma gases on the shear bond strength between unfilled polyetheretherketone (PEEK) and veneering composite following artificial aging. Materials. 2019;12(9):1447.
   PubMed Web of Science ®Google Scholar
• Sproesser O, Schmidlin PR, Uhrenbacher J, et al. Work of adhesion between resin composite cements and PEEK as a function of etching duration with sulfuric acid and its correlation with bond strength values. Int J Adhes Adhes. 2014;54:184–190.
   Web of Science ®Google Scholar
• Zhou L, Qian Y, Zhu Y, et al. The effect of different surface treatments on the bond strength of PEEK composite materials. Dent Mater. 2014;30(8):e209–e215.
   PubMed Web of Science ®Google Scholar
• Fedel M, Micheli V, Thaler M, et al. Effect of nitrogen plasma treatment on the crystallinity and self‐bonding of polyetheretherketone (PEEK) for biomedical applications. Polym Adv Technol. 2020;31(2):240–247.
   PubMed Web of Science ®Google Scholar
• Xue C, Gao F, Wen DQ, et al. Experimental investigation of the electron impact excitation behavior in pulse-modulated radio frequency Ar/O2 inductively coupled plasma. J Appl Phys. 2019;125(2):023303.
   Web of Science ®Google Scholar
• Caglar I, Ates SM, Yesil Duymus Z. An in vitro evaluation of the effect of various adhesives and surface treatments on bond strength of resin cement to polyetheretherketone. J Prosthodont. 2019;28(1):e342–e349.
   PubMedGoogle Scholar
• Bona AD, Anusavice KJ. Microstructure, composition, and etching topography of dental ceramics. Int J Prosthodont. 2002;15(2):159–167.
   PubMed Web of Science ®Google Scholar
• Jin X-Z, Homaei E, Matinlinna JP, et al. A new concept and finite-element study on dental bond strength tests. Dent Mater. 2016;32(10):e238–e250.
   PubMed Web of Science ®Google Scholar
• Hallmann L, Mehl A, Sereno N, et al. The improvement of adhesive properties of PEEK through different pre-treatments. Appl Surf Sci. 2012;258(18):7213–7218.
   Web of Science ®Google Scholar
• Terpilowski K, Rymuszka D. Surface properties of glass plates activated by air, oxygen, nitrogen and argon plasma. Glass Phys Chem. 2016;42(6):535–541.
   Web of Science ®Google Scholar
• Schwitalla AD, Bötel F, Zimmermann T, et al. The impact of argon/oxygen low-pressure plasma on shear bond strength between a veneering composite and different PEEK materials. Dent Mater. 2017;33(9):990–994.
   PubMed Web of Science ®Google Scholar
• Lümkemann N, Strickstrock M, Eichberger M, et al. Impact of air-abrasion pressure and adhesive systems on bonding parameters for polyetheretherketone dental restorations. Int J Adhes Adhes. 2018;80:30–38.
   Web of Science ®Google Scholar
• Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003;24(4):655–665.
   PubMed Web of Science ®Google Scholar
• Huang RYM, Shao P, Burns CM, et al. Sulfonation of poly (ether etherketone) (PEEK): kinetic study and characterization. J Appl Polym Sci. 2001;82(11):2651–2660.
   Web of Science ®Google Scholar
• Bulut NB, Evlioğlu G, Röhlig BG, et al. Effect of dentin pretreatment on shear bond strength of three resin-based luting cements. Eur Oral Res. 2018;52(2):82–88.
   PubMedGoogle Scholar
• Novais VR, Raposo LH, Miranda RR, et al. Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes. J Appl Oral Sci. 2017;25(1):61–68.
   PubMed Web of Science ®Google Scholar
• Juárez-Moreno JA, Brito-Argáez LG, Ávila-Ortega A, et al. Effect of the type of plasma on the polydimethylsiloxane/collagen composites adhesive properties. Int J Adhes Adhes. 2017;77:85–95.
   Web of Science ®Google Scholar
• Ozeki K, Masuzawa T, Hirakuri KK. The wear properties and adhesion strength of the diamond-like carbon film coated on SUS, Ti and Ni-Ti with plasma pre-treatment. Biomed Mater Eng. 2010;20(1):21–35.
   PubMed Web of Science ®Google Scholar
• Stawarczyk B, Keul C, Beuer F, et al. Tensile bond strength of veneering resins to PEEK: impact of different adhesives. Dent Mater J. 2013;32(3):441–448.
   PubMed Web of Science ®Google Scholar
• Zhang S, Awaja F, James N, et al. Autohesion of plasma treated semi-crystalline PEEK: comparative study of argon, nitrogen and oxygen treatments. Colloids Surf, A. 2011;374(1–3):88–95.
   Web of Science ®Google Scholar
• Vesel A, Junkar I, Cvelbar U, et al. Surface and interface analysis: an international journal devoted to the development and application of techniques for the analysis of surfaces, interfaces and thin films. Surf Modif Poly Oxygen nitro plasma treatment. 2008;40(11):1444–1453.
   Google Scholar
• Wang W, Luo CJ, Huang J, et al. PEEK surface modification by fast ambient-temperature sulfonation for bone implant applications. J R Soc Interface. 2019;16(152):20180955.
   PubMed Web of Science ®Google Scholar
• Morresi AL, D’Amario M, Capogreco M, et al. Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review. J Mech Behav Biomed Mater. 2014;29:295–308.
   PubMed Web of Science ®Google Scholar
• Uhrenbacher J, Schmidlin PR, Keul C, et al. The effect of surface modification on the retention strength of polyetheretherketone crowns adhesively bonded to dentin abutments. J Prosthet Dent. 2014;112(6):1489–1497.
   PubMed Web of Science ®Google Scholar
• Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999;27(2):89–99.
   PubMed Web of Science ®Google Scholar
• Fuhrmann G, Steiner M, Freitag-Wolf S, et al. Resin bonding to three types of polyaryletherketones (PAEKs)-durability and influence of surface conditioning. Dent Mater. 2014;30(3):357–363.
   PubMed Web of Science ®Google Scholar
• Corazza PH, Cavalcanti SC, Queiroz JR, et al. Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement. J Adhes Dent. 2013;15(5):473–479.
   PubMed Web of Science ®Google Scholar
• Fokas G, Guo CY, Tsoi JKH. The effects of surface treatments on tensile bond strength of polyether-ketone-ketone (PEKK) to veneering resin. J Mech Behav Biomed Mater. 2019;93:1–8.
   PubMed Web of Science ®Google Scholar
• Zhou L, Qian Y, Gan K, et al. Effect of different surface treatments and thermocycling on shear bond strength to polyetheretherketone. High Perform Polym. 2017;29(1):87–93.
   Web of Science ®Google Scholar