Sensitivity analysis of the MIG welding process parameters based on response surface method

References

• Xu LH, Tian ZL, Peng Y, et al. Comparison of MIG welding and laser – MIG welding of high strength aluminum alloy. Trans China Weld Inst. 2017;28:38–42, +115.
   Google Scholar
• Tang YY, Zhu ZM, Yang ZY, et al. Parametric adaptability of TIG arc-induced non-contact MIG arc ignition. J Tsinghua Univ (Sci Technol). 2018;58:477–481.
   Google Scholar
• Qin GL, Ao ZY, Chen Y, et al. Formability behavior of Al/steel MIG arc brazed-fusion welded joint. J Mater Process Tech. 2019;273:116255.
   Web of Science ®Google Scholar
• Yi J, Cao SF, Li LX, et al. Effect of welding current on morphology and microstructure of Al alloy T-joint in double-pulsed MIG welding. T Nonferr Metal Soc. 2015;25(10):3204–3211.
   Web of Science ®Google Scholar
• Ye Z, Huang JH, Cheng Z, et al. Combined effects of MIG and TIG arcs on weld appearance and interface properties in Al/steel double-sided butt welding-brazing. J Mater Process Tech. 2017;250:25–34.
   Web of Science ®Google Scholar
• Ye Z, Huang JH, Gao W, et al. Microstructure and mechanical properties of 5052 aluminum alloy/mild steel butt joint achieved by MIG-TIG double-sided arc welding-brazing. Mater Design. 2017;123:69–79.
   Web of Science ®Google Scholar
• Subramanian R, Natarajan B, Kaliyaperumal B, et al. Effect of MIG welding process parameters on microstructure and tensile behavior of hastelloy C276 using response surface methodology. Mater Res Express. 2019;6(6):066540.
   Web of Science ®Google Scholar
• Qi K, Li RF, Wang GJ, et al. Structure and mechanical properties of laser-MIG hybrid welded SAF 2507 super duplex stainless steel joints. Int J Mod Phys B. 2019;33(01n03):1940037.
   Google Scholar
• Qin GL, Su YH, Meng XM, et al. Numerical simulation on MIG arc brazing-fusion welding of aluminum alloy to galvanized steel plate. Int J Adv Manuf Technol. 2015;78(9–12):1917–1925.
   Web of Science ®Google Scholar
• Xu GX, Guo QH, Hu QX, et al. Numerical analysis of welding residual stress in laser + MIG hybrid butt welding of medium-thick aluminum alloy. JME. 2018;54(2):77–83.
   Google Scholar
• Xu GX, Li PF, Cao QN, et al. Modelling of fluid flow phenomenon in laser + GMAW hybrid welding of aluminum alloy considering three phase coupling and arc plasma shear stress. Opt Laser Technol. 2018;100:244–255.
   Web of Science ®Google Scholar
• Xu GX, Zheng ZQ, Cao QN, et al. Numerical and experimental investigation on weld formation during laser + MIG hybrid fillet welding of aluminum alloy in horizontal position. Int J Adv Manuf Technol. 2019;102(5–8):2683–2694.
   Web of Science ®Google Scholar
• Meng XM, Qin GL, Su YH, et al. Numerical simulation of large spot laser + MIG arc brazing–fusion welding of Al alloy to galvanized steel. J Mater Process Tech. 2015;222:307–314.
   Web of Science ®Google Scholar
• Zhan XH, Liu XB, Wei YH, et al. Numerical simulation on backward deformation of MIG multi-layer and multi-pass welding of thick Invar alloy. Int J Adv Manuf Technol. 2017;92(1–4):1001–1012.
   Web of Science ®Google Scholar
• Bonazzi E, Colombini E, Panari D, et al. Numerical simulation and experimental validation of MIG welding of T-joints of thin aluminum plates for top class vehicles. Metall and Mat Trans A. 2017;48(1):379–388.
   Google Scholar
• Ogino Y, Hirata Y, Asai S. Numerical simulation of metal transfer in pulsed-MIG welding. Weld World. 2017;61(6):1289–1296.
   Web of Science ®Google Scholar
• Sun GF, Wang ZD, Lu Y, et al. Numerical and experimental investigation of thermal field and residual stress in laser-MIG hybrid welded NV E690 steel plates. J Manuf Process. 2018;34:106–120.
   Web of Science ®Google Scholar
• Farias R, Teixeira P, Araújo DB. Thermo-mechanical analysis of the MIG/MAG multi-pass welding process on AISI 304L stainless steel plates. J Braz Soc Mech Sci Eng. 2017;39(4):1245–1258.
   Web of Science ®Google Scholar
• Ahmadi H, Zavvar E. Degree of bending (DoB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads. Appl Ocean Res. 2020;95:102015.
   Web of Science ®Google Scholar
• Ahmadi H, Zavvar E. The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads. Thin-Walled Struct. 2016;106:148–165.
   Web of Science ®Google Scholar
• Ahmadi H, Zavvar E. Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures. Thin-Walled Struct. 2015;91:82–95.
   Web of Science ®Google Scholar
• UK Department of Energy. Background notes to the fatigue guidance of offshore tubular joints. London, UK: UK Department of Energy; 1983.
   Google Scholar
• He H, Wu CS, Lin SB, et al. Pulsed TIG welding-brazing of aluminum-stainless steel with an Al-Cu twin hot wire. J Mater Eng and Perform. 2019;28(2):1180–1189.
   Web of Science ®Google Scholar