References
- Liu AG. English in materials science and engineering. Harbin: Harbin Institute of Technology. Press; 2007. P. 115.
- Peter C, Jim H. Welding. Oxford: Butterworth-Heinemann; 1997.
- Jiang BJ, Chen Q, Yang J. Advances in joining technology of carbon fiber-reinforced thermoplastic composite materials and aluminum alloys. Int J Adv Manuf Technol. 2020;110(9–10):2631–2649.
- Park C W, Yoon S W, Cho J H, et al. Analysis of residual stress in welding parts of cryogenic materials for LNG storage tank[J]. Modern Physics Letters B. 2020.
- Zhu XK, Chao YJ. Effects of temperature-dependent material properties on welding simulation. Comput Struct. 2002;11:967–976.
- Chuaiphan W, Somrerk CA, Niltawach S, et al. Dissimilar welding between AISI 304 stainless steel and AISI 1020 carbon steel plates. AMM. 2012;268–270:283–290.
- Huang BS, Liu JQ, Zhang SS, et al. Effect of post-weld heat treatment on the residual stress and deformation of 20/0Cr18Ni9 dissimilar metal welded joint by experiments and simulations. J Mater Res Technol. 2020;9(3):6186–6200.
- Radaj D. Welding residual stress and distortion calculation and measurement. Cambridge: Woodhead Publishing Ltd, DVS Verlag; 2003.
- Huang BS, Chen Q, Yang J, et al. Numerical simulation of welding residual stress and distortion in Q345/316L dissimilar steel. Trans China Weld Inst. 2019;2:138–144 + 167.
- Fu G, Lourenco MI, Duan M, et al. Effect of boundary conditions on residual stress and distortion in T-joint welds. J Constr Steel Res. 2014;102:121–135.
- Fu G, Lourenco MI, Duan M, et al. Influence of the welding sequence on residual stress and distortion of fillet welded structures. Mar Struct. 2016;46:30–55.
- Deng D, Kiyoshima S. Numerical simulation of residual stresses induced by laser beam welding in a SUS316 stainless steel pipe with considering initial residual stress influences. Nucl Eng Des. 2010;240(4):688–696.
- Chen Q, Fei F, Yu SD, et al. Numerical simulation of temperature field and residual stress in stainless steel T-joint. Trans Indian Inst Met. 2020;73(3):751–761.
- Knoedel P, Gkatzogiannis S, Ummenhofer T. Practical aspects of welding residual stress simulation. J Constr Steel Res. 2017;132:83–96.
- Perić M, Tonković Z, Garašić I, et al. An engineering approach for a T-joint fillet welding simulation using simplified material properties. Ocean Eng. 2016;128:13–21.
- Rong Y, Huang Y, Xu J, et al. Numerical simulation and experiment analysis of angular distortion and residual stress in hybrid laser-magnetic welding. *J Mater Process Technol. 2017;245:270–277.
- Zubairuddin M, Albert SK, Vasudevan M, et al. Numerical simulation of multi-pass GTA welding of grade 91 steel. J Manuf Process. 2017;27:87–97.
- Xia J, Jin H. Numerical study of welding simulation and residual stress on butt welding of dissimilar thickness of austenitic stainless steel. Int J Adv Manuf Technol. 2016;1–4:1–9.
- Wittig B, Zinke M, Jüttner S, et al. Experimental simulation of dissimilar weld metal of high manganese steels by arc melting technique. Weld World. 2017;61(2):249–248.
- Yang Q, Xie SJ, Gao HT. Numerical simulation of welding deformation under different conditions. AMR. 2012;538–541:1439–1442.
- Zhang H, Wang DP, Li S. Numerical simulation of welding residual stress considering phase transformation effects. AMR. 2011;295–297:1905–1910.
- Chen J, Shu W, Li J. Constitutive model of Q345 steel at different intermediate strain rates. Int J Steel Struct. 2017;17(1):127–137.
- Manurung YHP, Lidam RN, Rahim MR, et al. Welding distortion analysis of multipass joint combination with different sequences using 3D FEM and experiment. Int J Pres Ves Pip. 2013;111–112:89–98.
- Díaz JJDC, Rodríguez PM, Nieto PJG, et al. Comparative analysis of TIG welding distortions between austenitic and duplex stainless steels by FEM. Appl Therm Eng. 2010;16:2448–2459.
- Brickstad B, Josefson BL. A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes. Int J Pres Ves Pip. 1998;75(1):11–25.
- Choobi MS. Investigating the effect of geometrical parameters on distortions in butt-welded plates. J Strain Anal Eng. 2013;48(4):258–268.
- Evci C, Işık H, Macar M. Effect of welding wire and groove angle on mechanical properties of high strength steel welded joints. Mat-Wiss u Werkstofftech. 2017;48(9):912–921.
- Deepali S, Dhamejani CL, Burkul RM. Influence of welding speed and groove angle on strength of V-groove butt weld joint using TIG welding. IJESRT. 2016;4:2277–9655.
- Huang Y, Luo Z, Lei Y. Dissimilar joining of AISI 304/Q345 steels in keyhole tungsten inert gas welding process. Int J Adv Manuf Technol. 2018;1:1–9.
- Ahmadi H, Zavvar E. Degree of bending (DOB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads. Appl Ocean Res. 2020;95:102015.
- Ahmadi H, Zavvar E. The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads. Thin Wall Struct. 2016;106:148–165.
- Ahmadi H, Zavvar E. Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures. Thin Wall Struct. 2015;91:82–95.
- Huang BS, Chen Q, Zhao X, et al. Microstructure, properties and corrosion characterization of welded joint for cComposite pipe using a novel welding process. Trans Indian Inst Met. 2018;71(12):2933–2944.
- Xie YJ, Zhuang J, Huang BS, et al. Effect of different welding parameters on residual stress and deformation of 20/0Cr18Ni9 dissimilar metal arc-welding joint. J Adhes Sci Technol. 2020;34(6):1–25.
- ASMS Boiler and Pressure Vessel Code IX, Qualification standard for welding and brazing procedures, welder, brazers, and welding and brazing operators. New York: The American Society Mechanical Engineers; 2010.
- Rossini NS, Dassisti M, Benyounis KY, et al. Methods of measuring residual stresses in components. Mater Des. 2012;35:572–588.
- ASTM Standard, E837-08 Standard test method for determining residual stresses by the hole-drilling strain-gage method. West Conshohocken: ASMT International; 2008.
- Bajpei T, Chelladurai H, Ansari MZ. Experimental investigation and numerical analyses of residual stresses and distortions in GMA welding of thin dissimilar AA5052-AA6061 plates. J Manuf Process. 2017;25:340–350.
- Deng D, Kiyoshima S. Numerical simulation of welding temperature field, residual stress and deformation induced by electro slag welding. Comp Mater Sci. 2012;62:23–24.
- Goldak J, Chakravarti A, Bibby M. A new finite element model for welding heat source. *MTB. 1984;15(2):299–305.
- Chen Q, Yang J, Liu XH, et al. Effect of the groove type when considering a thermometallurgical-mechanical model of the welding residual stress and deformation in an S355JR-316L dissimilar welded joint. J Manuf Process. 2019;45:290–303.
- Javadi Y, Akhlaghi M, Najafabadi MA. Using finite element and ultrasonic method to evaluate welding longitudinal residual stress through the thickness in austenitic stainless steel plates. Mater Des. 2013;45:628–642.
- Chen J, Schwenk C, Wu CS, et al. Predicting the influence of groove angle on heat transfer and fluid flow for new gas metal arc welding processes. *Int J Heat Mass Transf. 2012;1:102–111.
- Yun KH, Kim JY, Hong TM. *Butt-joint Welding Method: US20090173727; 2009.
- Vasantharaja P, Vasudevan M, Palanichamy P. Effect of welding processes on the residual stress and distortion in type 316LN stainless steel weld joints. J Manuf Process. 2015;19:187–193.