Adhesion improvement of ABS resin by MnO₂-H₃PO₄-H₂SO₄ colloid with ultrasound-assisted etching treatment

References

• Leonas N, Grigorijus R, Jonas V, et al. World Patent. WO/2000/029646; 2000.
   Google Scholar
• Wang G, Li N, Hu H, et al. Process of direct copper plating on ABS plastics. Appl Surf Sci. 2006;253:480.
   Web of Science ®Google Scholar
• Shams KM, Tichy G, Fischer A, et al. Chromium contamination from tannery wastes in the soils of Hazaribagh area in dhaka city, bangladesh, and aspects of its phytoremediation. Geophys Res Abstr. 2008;10:A-05037.
   Google Scholar
• Teixeira LAC, Santini MC. Surface conditioning of ABS for metallization without the use of chromium baths. J Mater Process Technol. 2005;170(1–2):37–41.
   Web of Science ®Google Scholar
• Sugimoto M, Tashiro K, Bessho T, et al. Surface reforming of ABS resin using TiO2 under UV light irradiation. J Surf Finish Soc Jap. 2006;57(2):162–166.
   Google Scholar
• Bessho T, Tashiro K, Inoue K, et al. Electroless copper plating on the insulating resin for build-up process using TiO2 as a photocatalyst. J Surf Finish Soc Jap. 2006;57(2):157–161.
   Google Scholar
• Kim GG, Kang JA, Kim SJ, et al. Improved adhesion to ABS plastics by a photocatalytic reaction. MSF. 2007;544–545:75–78.
   Google Scholar
• Bessho T, Yoshinaga F, Inoue K, et al. Pretreatment of nickel plating on ASA resin using ozonated water as replacement for chromic acid etching. J Surf Finish Soc Jap. 2006;57(9):659–663.
   Google Scholar
• Price GJ, Keen F, Clifton AA. Sonochemically-assisted modification of polyethylene surfaces. Macromolecules. 1996;29(17):5664–5670.
   Web of Science ®Google Scholar
• Zhao YY, Bao CG, Feng R, et al. New etching method of PVC plastic for plating by ultrasound. J Appl Polym Sci. 1998;68(9):1411–1416.
   Web of Science ®Google Scholar
• Liu L, Huang YD, Zhang ZQ, et al. Effect of ultrasound on wettability between aramid fibers and epoxy resin. J Appl Polym Sci. 2006;99(6):3172–3177.
   Web of Science ®Google Scholar
• Li Z, Li N, Yin L, et al. An environment-friendly surface pretreatment of ABS resin prior to electroless plating. Electrochem Solid-State Lett. 2009;12(12):D92.
   Google Scholar
• Yang Z, He Y, Li Z, et al. Adhesion improvement of ABS resin to electroless copper by H2SO4–MnO2 colloid with ultrasound-assisted treatment. J Adhes Sci Tech. 2011;25(11):1211–1221.
   Web of Science ®Google Scholar
• Wang Z, Li Z, He Y, et al. Study of an environmentally friendly surface etching system of ABS for improving adhesion of electroless Cu film. J Electrochem Soc. 2011;158(11):D664.
   Web of Science ®Google Scholar
• Zhao W, Wang Z. Adhesion improvement of electroless copper to ABS resin by low environmental pollution surface etching system. Trans Inst Met Finish. 2013;91(3):149–155.
   Web of Science ®Google Scholar
• Zhao W, Ding J, Wang Z. Improvement in the etching performance of the acrylonitrile-butadiene-styrene resin by MnO2-H3PO4-H2SO4 colloid. Langmuir. 2013;29(20):5968–5973.
   PubMed Web of Science ®Google Scholar
• Ma Q, Zhao W, Li X, et al. Study of an environment-friendly surface pretreatment of ABS-polycarbonate surface for adhesion improvement. J Adhes. 2013;44:243–249.
   Web of Science ®Google Scholar
• Zhao W, Li Z, Wang Z. A study of the environmentally friendly polycarbonate surface etching system containing H2SO4–MnO2 colloid. J Adhes Sci Tech. 2013;27(13):1455–1463.
   Web of Science ®Google Scholar
• Jiang H, Liu Z, Wang X, et al. Effect of triethanolamine on deposition rate of electroless copper plating. Trans Inst Met Finish. 2007;85(2):103–106.
   Web of Science ®Google Scholar
• Yang Z, He Y, Li Z, et al. Adhesion improvement of ABS resin to electroless copper by H2SO4–MnO2 colloid with ultrasound-assisted treatment. J Adhes Sci Tech. 2011;25(11):1211–1221.
   Web of Science ®Google Scholar
• Wang Z, Furuya A, Yasuda K, et al. Adhesion improvement of electroless copper to a polyimide film substrate by combining surface microroughening and imide ring cleavage. J Adhes Sci Tech. 2002;16(8):1027–1040.
   Web of Science ®Google Scholar
• Kisin S, Th PG, Varst VD, et al. Adhesion and adhesion changes at the copper metal–(acrylonitrile–butadiene–styrene) polymer interface. Thin Solid Films. 2007;515(17):6853–6859.
   Web of Science ®Google Scholar
• Mettin R, Luther S, Ohl CD, et al. Acoustic cavitation structures and simulations by a particle model. Ultrason Sonochem. 1999;6(1–2):25–29.
   PubMed Web of Science ®Google Scholar
• Piero C, Nikolai VD, Alberto F, et al. Cavitation activity stimulation by low frequency fifield pulses. Ultrason Sonochem. 2000;7:213.
   PubMed Web of Science ®Google Scholar
• Ciuti P, Dezhkunov NV, Iernetti G, et al. Cavitation phenomena in pulse modulated ultrasound fields. Ultrasound. 1998;36(1–5):569–574.
   Google Scholar