References
- Ivanjko M, Meschut G. Innovative joining technology for multi-material applications with high manganese steels in lightweight car body structures. Weld World. 2019;63(1):97–106.
- Chen JP, Liao DR, Yuan T, et al. Carbon emission cycle and literature measurement of carbon fiber vehicles. Mete Environ Res. 2020;11(06):60–67.
- Wang TT, Dong RY, Zhang S, et al. Research on lightweight design of automobile collision safety structure based on multiple materials. J Phys Conf Ser. 2020;1670(1):1–10.
- Liu Q, Lin YZ, Zong ZJ, et al. Lightweight design of carbon twill weave fabric composite body structure for electric vehicle. Compos Struct. 2013;97:231–238.
- Hwang JH, Jin CK, Lee MS, et al. Effect of surface roughness on the bonding strength and spring-back of a CFRP/CR980 hybrid composite. Met. 2018;8(9):716–728.
- Wu LH, Xiao BL, Nagatsuka K, et al. Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment. Compos Struct. 2020;242:1–11.
- He J, Xian G. Debonding of CFRP-to-steel joints with CFRP delamination. Compos Struct. 2016;153:12–20.
- Kim WS, Kim KH, Jang CJ, et al. Micro- and nano-morphological modification of aluminum surface for adhesive bonding to polymeric composites. J Adhes Sci Technol. 2013;27(15):1625–1640.
- Alp Ö, İbrahim K, Pavel S. Improving the strength of adhesively bonded joints through the introduction of various surface treatments. J Adhes Sci Technol. 2016;30(23):2–24.
- Rhee KY, Shin MK, Choi NS, et al. Investigation on surface treatments of CFRP and aluminum to improve fracture toughness of adhesively-bonded CFRP-aluminum joint. J Adhes Sci Technol. 2003;17(12):1619–1634.
- Chamochin R, Santayana M, Abenojar J, et al. The effect of surface treatment on the behavior of toughened acrylic adhesive/GRP(epoxy) composite joints. J Adhes Sci Technol. 2010;24(11–12):1903–1916.
- Zielecki W, Pawlus P, Perłowski R, et al. Surface topography effect on strength of lap adhesive joints after mechanical pre-treatment. Arch Civil Mech Eng. 2013;13(2):175–185.
- Allen KW, Alsalim HS. Analysis and simulation of the failure characteristic of a single leg bending joint with a micro-patterned surface. J Adhes. 2006;8(3):37–41.
- Rhee KY, Choi NS, Park SJ. Effect of plasma treatment of aluminum on the bonding characteristics of aluminum-CFRP composite joints. J Adhes Sci Technol. 2002;16(11):1487–1500.
- Zhang Z, Shan JG, Tan XH, et al. Improvement of the laser joining of CFRP and aluminum via laser pre-treatment. Int J Adv Manuf Technol. 2017;90(9–12):3465–3468.
- Chen F, Yao W, Jiang W. Experimental and simulation investigation on BVID and CAI behaviors of CFRP laminates manufactured by RTM technology. Eng Comput. 2021;38(5):2252–2273.
- Zhang Z, Shan JG, Tan XH. Evaluation of the CFRP grafting and its influence on the laser joining CFRP to aluminum alloy. J Adhes Sci Technol. 2018;32(4):390–406.
- Striemann P, Hülsbusch D, Niedermeier M. Quasi-static characterization of polyamide-based discontinuous CFRP manufactured by additive manufacturing and injection molding. Key Eng Mater. 2019;4803:1–23.
- Shin DK, Kim HC, Lee JJ. Numerical analysis of the damage behavior of an aluminum/CFRP hybrid beam under three point bending. Compos B. 2014;56(1):397–407.
- Wang Y, Li J, Deng J, et al. Numerical study on notched steel plate with center hole strengthened by CFRP. J Adhes Sci Technol. 2018;32(10):1066–1080.
- Jeong SW, Bolortuya S, Eadi SB, et al. Fabrication of superhydrophobic surfaces based on PDMS coated hydrothermal grown ZnO on PET fabrics. J Adhes Sci Technol. 2020;34(1):102–113.
- Lashkarbolooki M, Ayatollahi S. Performance of sea water dilution on the surface free energies of the crude oils in water-flooded carbonate rock. J Adhes Sci Technol. 2018;32(12):1359–1368.
- Lugscheider E, Bobzin K. The influence on surface free energy of PVD-coatings. Surf Coat Technol. 2001;142–144:755–760.
- Schrader ME. Young-Dupre revisited. J Colloid Interface Sci. 1990;137(1):304–307.
- Li D, Neumann AW. A reformulation of the equation of state for interfacial tensions. Acad Press. 1990;137(1):304–307.
- Wang BH, Kang SS, Wang G. Mode-II fracture properties of CFRP/steel composite structure reinforced by short aramid fibers. J Adhes Sci Technol. 2019;34(9):1–960.