Optimal preparation and characterization of self-curing concrete containing internal superabsorbent polymer and external waterborne epoxy coating

References

• Nahata Y, Kholia N, Tank TG. Effect of curing methods on efficiency of curing of cement mortar. APCBEE Proc. 2014;9:222–229.
   Google Scholar
• Pan X, Shi Z, Shi C, et al. A review on concrete surface treatment part I: types and mechanisms. Constr Build Mater. 2017;132:578–590.
   Web of Science ®Google Scholar
• Hajibabaee A, Moradllo MK, Ley MT. Comparison of curing compounds to reduce volume change from differential drying in concrete pavement. Int J Pavement Eng. 2018;19(9):815–824.
   Web of Science ®Google Scholar
• Liu B, Luo G, Xie Y. Effect of curing conditions on the permeability of concrete with high volume mineral admixtures. Constr Build Mater. 2018;167:359–371.
   Web of Science ®Google Scholar
• Ibrahim M, Shameem M, Al-Mehthel M, et al. Effect of curing methods on strength and durability of concrete under hot weather conditions. Cem Concr Compos. 2013;41:60–69.
   Web of Science ®Google Scholar
• Prak L, Sumranwanich T, Tangtermsirikul S. Experimental investigation on the degradation of coating on concrete surfaces exposed to accelerated and natural UV in chloride environment. J Adhes Sci Technol. 2022;1–17.
   Web of Science ®Google Scholar
• Khaliq W, Javaid W. Efficiency comparison of conventional and unconventional curing methods in concrete. ACI Mater J. 2018;115(1):285–294.
   Web of Science ®Google Scholar
• He DL, Shi Y, Luo TL, et al. Mechanical and durability properties of self-compacting concrete made with fly ash microbeads and phosphorous slag powder. J Adhes Sci Technol. 2020;34(14):1572–1590.
   Web of Science ®Google Scholar
• Yao JL, Wang ZQ, Tang DH. Development and application of water-saving and moisture-retaining membrane made from controllable high polymer materials for concrete curing. J Perform Constr Fac. 2019;33(1):04018104.
   Web of Science ®Google Scholar
• Belaidi ASE, Benabed B, Soualhi H. Physical and mechanical properties of concrete repair materials in dry and hot-dry environment. J Adhes Sci Technol. 2015;29(6):543–554.
   Web of Science ®Google Scholar
• Du J, Meng W, Khayat KH, et al. New development of ultra-high-performance concrete (UHPC). Comp Part B: Eng. 2021;224:109220.
   Web of Science ®Google Scholar
• Chen N, Wang PM, Zhao LQ, et al. Experimental study on rheological properties of cement mortars. J Adhes Sci Technol. 2021;35(7):733–750.
   Web of Science ®Google Scholar
• Liu B, Jiang J, Shen S, et al. Effects of curing methods of concrete after steam curing on mechanical strength and permeability. Constr Build Mater. 2020;256:119441.
   Web of Science ®Google Scholar
• Necira B, Guettala A, Guettala S. Study of the combined effect of different types of sand on the characteristics of high performance self-compacting concrete. J Adhes Sci Technol. 2017;31(17):1912–1928.
   Web of Science ®Google Scholar
• Wasserman R, Bentur A. Efficiency of curing technologies: strength and durability. Mater Struct. 2013;46(11):1833–1842.
   Web of Science ®Google Scholar
• Surana S, Pillai RG, Santhanam M. Performance evaluation of curing compounds using durability parameters. Constr Build Mater. 2017;148:538–547.
   Web of Science ®Google Scholar
• Xue B, Pei J, Sheng Y, et al. Effect of curing compounds on the properties and microstructure of cement concretes. Constr Build Mater. 2015;101:410–416.
   Web of Science ®Google Scholar
• Pan X, Shi Z, Shi C, et al. A review on surface treatment for concrete – part 2: performance. Constr Build Mater. 2017;133:81–90.
   Web of Science ®Google Scholar
• Schröfl C, Erk KA, Siriwatwechakul W, et al. Recent progress in superabsorbent polymers for concrete. Cem Concr Res. 2022;151:106648.
   Web of Science ®Google Scholar
• Wang WZ, Shen AQ, He ZM, et al. Mechanism and erosion resistance of internally cured concrete including super absorbent polymers against coupled effects of acid rain and fatigue load. Constr Build Mater. 2021;290:123252.
   Web of Science ®Google Scholar
• Kang S-H, Hong S-G, Moon J. Absorption kinetics of superabsorbent polymers (SAP) in various cement-based solutions. Cem Concr Res. 2017;97:73–83.
   Web of Science ®Google Scholar
• Schroefl C, Mechtcherine V, Vontobel P, et al. Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration. Cem Concr Res. 2015;75:1–13.
   Web of Science ®Google Scholar
• Kalinowski M, Woyciechowski P, Sokołowska J. Effect of mechanically-induced fragmentation of polyacrylic superabsorbent polymer (SAP) hydrogel on the properties of cement composites. Constr Build Mater. 2020;263:120135.
   Web of Science ®Google Scholar
• Lefever G, Tsangouri E, Snoeck D, et al. Combined use of superabsorbent polymers and nanosilica for reduction of restrained shrinkage and strength compensation in cementitious mortars. Constr Build Mater. 2020;251:118966.
   Web of Science ®Google Scholar
• Tiznobaik M, Bassuoni MT. Application of curing compounds on concrete pavements. Can J Civ Eng. 2017;44(6):452–461.
   Web of Science ®Google Scholar
• El-Dieb AS. Self-curing concrete: water retention, hydration and moisture transport. Constr Build Mater. 2007;21(6):1282–1287.
   Web of Science ®Google Scholar
• Yang J, Snoeck D, De Belie N, et al. Comparison of liquid absorption-release of superabsorbent polymers in alkali-activated slag and Portland cement systems: an NMR study combined with additional methods. Cem Concr Res. 2021;142:106369.
   Web of Science ®Google Scholar
• JTG 3420-2020. Testing methods of cement and concrete for highway engineering. Beijing (China): Ministry of Transport of the People’s Republic of China; 2020.
   Google Scholar
• Wang WZ, Shen AQ, Lyu ZH, et al. Fresh and rheological characteristics of fiber reinforced concrete – a review. Constr Build Mater. 2021;296:123734.
   Web of Science ®Google Scholar
• ASTM C1585-20. Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. West Conshohocken (PA): ASTM; 2020.
   Google Scholar
• BS EN 12087:2013. Thermal insulating products for building applications – determination of long term water absorption by immersion. London (UK): British Standards Institution; 2013.
   Google Scholar
• Jin HS, Xu HY, Yang SY, et al. Grey target decision analysis of optimum mixing ratio of LWAS based on the comprehensive performance. Constr Build Mater. 2020;262:120570.
   Web of Science ®Google Scholar
• He ZM, Shen AQ, Wang WZ, et al. Evaluation and optimization of various treatment methods for enhancing the properties of brick-concrete recycled coarse aggregate. J Adhes Sci Technol. 2022;36(10):1060–1080.
   Web of Science ®Google Scholar
• Gu K, Chen B. Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction. Constr Build Mater. 2020;231:117195.
   Web of Science ®Google Scholar
• Wang WZ, Shen AQ, He ZM, et al. Evaluation of the adhesion property and moisture stability of rubber modified asphalt mixture incorporating waste steel slag. J Adhes Sci Technol. 2022;1–23.
   Web of Science ®Google Scholar