Effect of material positioning on Si-rich TIG welded joints of AA6082 and AA8011 by friction stir processing

References

• Totten GE, Mackenzie DS. Handbook of aluminum. Vol. 2, Alloy production and materials manufacturing. Basel: Marcel Dekker, 2003.
   Google Scholar
• Wahab Hashmi A, Mehdi H, Mabuwa S, et al. Influence of FSP parameters on wear and microstructural characterization of dissimilar TIG welded joints with Si-rich filler metal. Silicon. 2022. https://doi.org/10.1007/s12633-022-01848-8.
   Web of Science ®Google Scholar
• Salah AN, Mabuwa S, Mehdi H, et al. Effect of multipass FSP on Si-rich TIG welded joint of dissimilar aluminum alloys AA8011-H14 and AA5083-H321: EBSD and microstructural evolutions. Silicon. 2022. https://doi.org/10.1007/s12633-022-01717-4.
   Web of Science ®Google Scholar
• Dursun T, Soutis C. Recent developments in advanced aircraft aluminium alloys. Mater Des (1980-2015). 2014;56:862–871.
   Web of Science ®Google Scholar
• Fayomi J, Popoola API, Popoola OM, et al. Tribological and microstructural investigation of hybrid AA8011/ZrB2-Si3N4 nanomaterials for service life improvement. Results Phys. 2019;14:102469.
   Web of Science ®Google Scholar
• Chen X, Peng Y, Peng S, et al. Flow and fracture behavior of aluminum alloy 6082-T6 at different tensile strain rates and triaxialities. PLoS One. 2017;12(7):e0181983.
   PubMed Web of Science ®Google Scholar
• Verma S, Gupta M, Misra JP. In B. Katalinic, editor, Friction stir welding of aerospace materials Vienna, Austria: DAAAM International, 2016.
   Google Scholar
• Bahl S, Singh T, Kumar V, et al. A systematic review on recent progress in advanced joining techniques of lightweight materials. AIMS Mater Sci. 2021;8(1):62–81.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Investigation of mechanical properties and heat transfer of welded joint of AA6061 and AA7075 using TIG + FSP welding approach. J Adv Join Process. 2020;1:100003.
   Google Scholar
• Mehdi H, Mishra RS. Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA7075. Defence Technol. 2021;17(3):715–727.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Influence of friction stir processing on weld temperature distribution and mechanical properties of TIG-Welded joint of AA6061 and AA7075. Trans Indian Inst Met. 2020;73(7):1773–1788.
   Web of Science ®Google Scholar
• Mishra RS, Mahoney MW, McFadden SX, et al. High strain rate superplasticity in a friction stir processed 7075 Al alloy. Scr Mater. 1999;42(2):163–168.
   Web of Science ®Google Scholar
• Padhy GK, Wu CS, Gao SJ. Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: a review. J Mater Sci Technol. 2018;34(1):1–38.
   Web of Science ®Google Scholar
• Ma ZY. Friction stir processing technology: a review. Metall Mater Trans A. 2008;39(3):642–658.
   Web of Science ®Google Scholar
• Mabuwa S, Msomi V. Effect of friction stir processing on gas tungsten arc-welded and friction stir-welded 5083-H111 aluminium alloy joints. Adv Mater Sci Eng. 2019;3510236:1–14.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Study of the influence of friction stir processing on tungsten inert gas welding of different aluminum alloy. SN Appl Sci. 2019;1:712.
   Web of Science ®Google Scholar
• Devireddy K, Devuri D, Cheepu MM, et al. Analysis of the influence of friction stir processing on gas tungsten arc welding of 2024 aluminum alloy weld zone. Int J Mech Prod Eng Res Dev. 2020;8(1):243–252.
   Google Scholar
• Mehdi H, Mishra RS. Effect of friction stir processing on microstructure and mechanical properties of TIG welded joint of AA6061 and AA7075. Metallogr Microstruct Anal. 2020;9(3):403–418.
   Web of Science ®Google Scholar
• Barooni O, Abbasi M, Givi M, et al. New method to improve the microstructure and mechanical properties of joint obtained using FSW. Int J Adv Manuf Technol. 2017;93(9–12):4371–4378.
   Web of Science ®Google Scholar
• Shamanian M, Mostaan H, Safari M, et al. Friction stir modification of GTA 7075-T6 Al alloy weld joints: EBSD study and microstructural evolutions. Arch Civil Mech Eng. 2017;17(3):574–585.
   Web of Science ®Google Scholar
• Kumar Rajak D, Pagar DD, Menezes PL, et al. Friction-based welding processes: friction welding and friction stir welding. J Adhes Sci Technol. 2020;34(24):2613–2637.
   Web of Science ®Google Scholar
• Singh G, Kang AS, Singh K, et al. Experimental comparison of friction stir welding process and TIG welding process for 6082-T6 aluminium alloy. In: 5th international conference of materials processing and characterization (ICMPC), 2016, p. 3590–3600.
   Google Scholar
• Selvaraj G, Karthikeyan T, Mohanadass R, et al. Investigation on mechanical properties of welded aluminium joints of AA8011 using friction stir welding. Int J Appl Eng Res. 2015;10(13):11095–11100.
   Google Scholar
• Mehdi H, Mishra RS. An experimental analysis and optimization of process parameters of AA6061 and AA7075 welded joint by TIG + FSP welding using RSM. Adv Mater Process Technol. 2020;9:1–23.
   Google Scholar
• Ahmed N, Veeman L. Improvement of mechanical and microstructural properties of AA 5052-H32 TIG weldment using friction stir processing approach. J Mater Res Technol. 2022;19:332–344.
   Google Scholar
• Balakrishnan M, Dinaharan I, Palanivel R, et al. Effect of friction stir processing on microstructure and tensile behavior of AA6061/Al3Fe cast aluminium matrix composites. J Alloy Comp. 2019;785:531–541.
   Web of Science ®Google Scholar
• Rahaman Hazari H, Balubai M, Suresh Kumar D, et al. Experimental investigation of TIG welding on AA 6082 and AA 8011. Mater Today. 2019;19(2):818–822.
   Google Scholar
• Giridharan K, Sevvel P, Senthilnathan K, et al. Experimental study on mechanical properties of friction stir welded dissimilar joints of aluminium alloys AA8011-AA6082. Int J Vehicle Struct Syst. 2019;11(2):135–139.
   Google Scholar
• Dawood HI, Mohammed KS, Rahmat A, et al. Effect of small tool pin profiles on microstructures and mechanical properties of 6061 aluminum alloy by friction stir welding. Trans Nonferrous Met Soc China 2015;25(9):2856–2865.
   Web of Science ®Google Scholar
• Bahrami M, Besharati Givi MK, Dehghani K, et al. On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique. Mater Des. 2014;53:519–527.
   Web of Science ®Google Scholar
• AnandhaKumar CJ, Gopi S, Kumar SS, et al. Mechanical, metallurgical and tribological properties of friction stir processed aluminium alloy 6061 hybrid surface composites. Surf Topogr Metrol Prop. 2021;9(4):045019.
   Web of Science ®Google Scholar
• Anandha Kumar CJ, Gopi S, Mohan DG, et al. Predicting the ultimate tensile strength and wear rate of aluminium hybrid surface composites fabricated via friction stir processing using computational methods. J Adhes Sci Technol. 2022;36(16):1707–1726.
   Web of Science ®Google Scholar
• Sun Y, Tsuji N, Fujii H. Microstructure and mechanical properties of dissimilar friction stir welding between ultrafine grained 1050 and 6061-T6 aluminum alloys. Metals. 2016;6(10):249.
   Web of Science ®Google Scholar
• Liu FC, Ma ZY. Influence of tool dimension and welding parameters on microstructure and mechanical properties of friction-stir-welded 6061-T651 aluminum alloy. Metall Mater Trans A. 2008;39(10):2378–2388.
   Web of Science ®Google Scholar
• Rao KP, Ramanaiah N, Viswanathan N. Partially melted zone cracking in AA6061 welds. Mater Des. 2008;29(1):179–186.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Effect of friction stir processing on mechanical properties and wear resistance of tungsten inert gas welded joint of dissimilar aluminum alloys. J Mater Eng Perform. 2021;30(3):1926–1937.
   Web of Science ®Google Scholar
• Rao SRK, Reddy GM, Rao KP. Effects of thermo-mechanical treatments on mechanical properties of AA2219 gas tungsten arc welds. J Mater Process Technol. 2008;202(1–3):283–289.
   Web of Science ®Google Scholar
• Mathers G. The welding of aluminum and its alloys, 1st edn. Cambridge: Woodhead Publishing, 2002.
   Google Scholar
• Mehdi H, Mishra RS. Microstructure and mechanical characterization of tungsten inert gas-welded joint of AA6061 and AA7075 by friction stir processing. Proc Inst Mech Eng L. 2021;235(11):2531–2546.
   Google Scholar
• Khan NZ, Siddiquee AN, Khan ZA, et al. Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys. J Alloys Compd. 2015;648:360–367.
   Web of Science ®Google Scholar
• Mabuwa S, Msomi V. The impact of submerged friction stir processing on the friction stir welded dissimilar joints. Mater Res Express. 2020;7(9):096513.
   Web of Science ®Google Scholar
• Barbini A, Carstensen J, dos Santos JF. Influence of alloys position, rolling and welding directions on properties of AA2024/AA7050 dissimilar butt weld obtained by friction stir welding. Metals. 2018;8(4):202.
   Web of Science ®Google Scholar
• Msomi V, Mabuwa S. Analysis of material positioning towards microstructure of the friction stir processed AA1050/AA6082 dissimilar joint. Adv. Industrial Manuf. Eng. 2020;1:100002.
   Google Scholar
• Kalemba-Rec I, Kopýsciánski M, Miara D, et al. Effect of process parameters on mechanical properties of friction stir welded dissimilar 7075-T651 and 5083-H111 aluminum alloys. Int J Adv Manuf Technol. 2018;97(5–8):2767–2779.
   Web of Science ®Google Scholar
• Mastanaiah P, Sharma A, Reddy GM. Dissimilar friction stir welds in AA2219-AA5083 aluminium alloys: Effect of process parameters on material inter-mixing, defect formation, and mechanical properties. Trans Indian Inst Met. 2016;69(7):1397–1415.
   Web of Science ®Google Scholar
• Hashmi AW, Mehdi H, Mishra RS, et al. Mechanical properties and microstructure evolution of AA6082/sic nanocomposite processed by Multi-Pass FSP. Trans Indian Inst Met. 2022;75(8):2077–2090.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Modification of microstructure and mechanical properties of AA6082/ZrB2 processed by multipass friction stir processing. J Mater Eng Perform. 2022. https://doi.org/10.1007/s11665-022-07080-0.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Mechanical properties and microstructure studies in friction stir welding (FSW) joints of dissimilar alloy- a review. J Achiev Mater Manuf Eng. 2016;77(1):31–40.
   Google Scholar
• Mehdi, H, Mishra RS. Consequence of reinforced SiC particles on microstructural and mechanical properties of AA6061 surface composites by multi-pass FSP. J Adhes Sci Technol. 2022;36(12):1279–1298.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Effect of multi-pass friction stir processing and SiC nanoparticles on microstructure and mechanical properties of AA6082-T6. Adv Ind Manuf Eng. 2021;3:100062.
   Google Scholar
• Smith WF, Hashemi J. Foundations of materials science and engineering, 4th ed. Boston, United States: McGraw-Hill, 2006.
   Google Scholar
• Mabuwa S, Msomi V. Comparative analysis between normal and submerged friction stir processed friction stir welded dissimilar aluminium alloy joints. J Mater Res Technol. 2020;9(5):9632–9644.
   Google Scholar
• Pandey C, Mahapatra MM, Kumar P, et al. Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel. Eng Fail Anal. 2019;96:158–167.
   Web of Science ®Google Scholar