Effect of loading rate on the failure of BFRP-Aluminum alloy single lap joints after hygrothermal aging

References

• Goede M, Stehlin M, Rafflenbeul L, et al. Super light car—lightweight construction thanks to a multi-material design and function integration. Eur Transp Res Rev. 2009;1(1):5–10.
   Google Scholar
• Li S, Guo S, Yao Y, et al. The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: a critical review. Constr Build Mater. 2021;282:122534.
   Web of Science ®Google Scholar
• Feng W, Xu F, Xie W, et al. Failure and reliability analysis of scarf-repaired CFRP: effect of hot–wet environment. J Adhes Sci Technol. 2021;35(15):1620–1636.
   Web of Science ®Google Scholar
• Li S, Zhu D, Guo S, et al. Static and dynamic tensile behaviors of BFRP bars embedded in seawater sea sand concrete under marine environment. Compos Part B Eng. 2022;242:110051.
   Web of Science ®Google Scholar
• Luan J, Na J, Tan W, et al. Comparative study on mechanical properties of aluminum alloy and BFRP single lap joints with hygrothermal aging. J Adhes. 2021;97:918–935.
   Web of Science ®Google Scholar
• Xiao B, Li H, Xian G. Hygrothermal ageing of basalt fiber reinforced epoxy composites. Advances in FRP composites in civil engineering. Berlin, Heidelberg, Springer. 2011: 356–359.
   Google Scholar
• Fan Y, Zhao G, Liu Z, et al. An experimental study on the mechanical performance of BFRP-Al adhesive joints subjected to salt solutions at elevated temperature. J Adhes Sci Technol. 2022:1–21.
   Web of Science ®Google Scholar
• Han X, Pickering E, Bo A, et al. Characterisation on the hygrothermal degradation in the mechanical property of structural adhesive: a novel meso-scale approach. Compos Part B Eng. 2020;182:107609.
   Web of Science ®Google Scholar
• Cavodeau F, Brogly M, Bistac S, et al. Hygrothermal aging of an epoxy/dicyandiamide structural adhesive – influence of water diffusion on the durability of the adhesive/galvanized steel interface. J Adhes. 2020;96(11):1027–1051.
   Web of Science ®Google Scholar
• Sander S, Meschut G, Kroll U, et al. Methodology for the systematic investigation of the hygrothermal-mechanical behavior of a structural epoxy adhesive. Int J Adhes Adhes. 2022;113:103072.
   Web of Science ®Google Scholar
• Li J, Xie Y, Zhu M, et al. Degradation mechanism of steel/CFRP plate interface subjected to overloading fatigue and wetting/drying cycles. Thin Wall Struct. 2022;179:109644.
   Web of Science ®Google Scholar
• Chen H, Na J, Mu W, et al. Effect of sealing treatment on the resistance of lap joints to hygrothermal aging. J Adhes. 2022;98(14):2231–2252.
   Web of Science ®Google Scholar
• Mu W, Na J, Tan W, et al. Durability of adhesively bonded CFRP-aluminum alloy joints subjected to coupled temperature and alternating load. Int J Adhes Adhes. 2020;99:102583.
   Web of Science ®Google Scholar
• Leger R, Roy A, Grandidier JC. A study of the impact of humid aging on the strength of industrial adhesive joints. Int J Adhes Adhes. 2013;44:66–77.
   Web of Science ®Google Scholar
• Korta J, Mlyniec A, Uhl T. Experimental and numerical study on the effect of humidity-temperature cycling on structural multi-material adhesive joints. Compos Part B Eng. 2015;79:621–630.
   Web of Science ®Google Scholar
• Hua D, Lin J, Zhang B. Effects of salt spray on the mechanical properties of aluminum-epoxy adhesive joints. J Adhes Sci Technol. 2013;27(14):1580–1589.
   Web of Science ®Google Scholar
• McConnell B, Pethrick R. Environmental effects on the hydrolytic ageing of Epibond 1590–aluminium joints — a dielectric study. J Adhes Sci Technol. 2009;23(4):529–553.
   Web of Science ®Google Scholar
• Adamvalli M, Parameswaran V. Dynamic strength of adhesive single lap joints at high temperature. Int J Adhes Adhes. 2008;28(6):321–327.
   Web of Science ®Google Scholar
• Erbayrak E, Ozer H. Effect of loading rate on cohesive parameters of the adhesive araldite 2015. Mater Test. 2020;62(9):943–950.
   Web of Science ®Google Scholar
• Araújo H, Machado J, Marques E, et al. Dynamic behaviour of composite adhesive joints for the automotive industry. Compos Struct. 2017;171:549–561.
   Web of Science ®Google Scholar
• Qin G, Na J, Tan W, et al. Failure prediction of adhesively bonded CFRP-Aluminum alloy joints using cohesive zone model with consideration of temperature effect. J Adhesion. 2019;95(8):723–746.
   Web of Science ®Google Scholar
• Zhang F, Yang X, Xia Y, et al. Experimental study of strain rate effects on the strength of adhesively bonded joints after hygrothermal exposure. Int J Adhes Adhes. 2015;56:3–12.
   Web of Science ®Google Scholar
• Strzemiecka B, Borek B, Voelkel A. Assessment of resin adhesives aging by means of rheological parameters, inverse gas chromatography, and FTIR. J Adhes Sci Technol. 2016;30(1):56–74.
   Web of Science ®Google Scholar
• Doménech-Carbó M, Lee Y, Osete-Cortina L, et al. Influence of plasticizer and biocide on the functional properties of gelatin-based adhesives used in painting consolidation. J Adhes Sci Technol. 2015;29(17):1774–1795.
   Web of Science ®Google Scholar
• Mu W, Na J, Wang G, et al. Rapid prediction method of failure load for hygrothermally aged CFRP – aluminum alloy single lap joints. Compos Struct. 2020;252:112603.
   Web of Science ®Google Scholar
• Qin G, Fan Y, Na J, et al. Durability of aluminium alloy adhesive joints in cyclic hydrothermal condition for high-speed EMU applications. Int J Adhes Adhes. 2018;84:153–165.
   Web of Science ®Google Scholar
• Koricho EG, Verna E, Belingardi G, et al. Parametric study of hot-melt adhesive under accelerated ageing for automotive applications. Int J Adhes Adhes. 2016;68:169–181.
   Web of Science ®Google Scholar
• Zhang M, Cheng Z, Zhao T, et al. Synthesis, characterization, and swelling behaviors of salt-sensitive maize bran–poly (acrylic acid) superabsorbent hydrogel. J Agric Food Chem. 2014;62(35):8867–8874.
   PubMed Web of Science ®Google Scholar
• Fan Y, Shangguan L, Zhang M, et al. Effect of cyclic hygrothermal aging on mechanical behaviours of adhesive bonded aluminum joints. J Adhes Sci Technol. 2021;35(2):199–219.
   Web of Science ®Google Scholar
• Wang S, Liang W, Duan L, et al. Effects of loading rates on mechanical property and failure behavior of single-lap adhesive joints with carbon fiber reinforced plastics and aluminum alloys. Int J Adv Manuf Technol. 2020;106(5-6):2569–2581.
   Web of Science ®Google Scholar
• Chen H, Wang D, Na J, et al. Effect of sealing treatment on mechanical properties of CFRP-Aluminum alloy single lap joints. Int J Adhes Adhes. 2022;119:103236.
   Web of Science ®Google Scholar
• Na J, Mu W, Qin G, et al. Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry. Int J Adhes Adhes. 2018;85:138–148.
   Web of Science ®Google Scholar
• Mu W, Qin G, Na J, et al. Effect of alternating load on the residual strength of environmentally aged adhesively bonded CFRP-aluminum alloy joints. Compos Part B-Eng. 2019;168:87–97.
   Web of Science ®Google Scholar
• Ilyani Akmar A, Lahmer T, Bordas S, et al. Uncertainty quantification of dry woven fabrics: a sensitivity analysis on material properties. Compos Struct. 2014;116:1–17.
   Web of Science ®Google Scholar
• Panda A, Sahoo A, Panigrahi I, et al. Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal. Mech Ind. 2020;21(5):520.
   Web of Science ®Google Scholar