Effect of travel speed and number of layers on surface waviness of ER70S6 deposits fabricated through non-transferred wire arc additive manufacturing

References

• Ding D, Pan Z, Cuiuri D, et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol. 2015;81(1–4):465–481.
   Web of Science ®Google Scholar
• Pattanayak S, Sahoo SK. Gas metal arc welding based additive manufacturing—a review. CIRP J Manuf Sci Technol. 2021;33:398–442.
   Web of Science ®Google Scholar
• Cunningham CR, Flynn JM, Shokrani A, et al. Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit. Manuf. 2018;22:672–686.
   Web of Science ®Google Scholar
• Lu X, Zhou YF, Xing XL, et al. Open-source wire and arc additive manufacturing system: formability, microstructures, and mechanical properties. Int J Adv Manuf Technol. 2017;93(5–8):2145–2154.
   Web of Science ®Google Scholar
• Wu B, Pan Z, Ding D, et al. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process. 2018;35:127–139.
   Web of Science ®Google Scholar
• Majeed A, Ahmed A, Lv J, et al. A state‑of‑the‑art review on energy consumption and quality characteristics in metal additive manufacturing processes. J Brazilian Soc Mech Sci Eng. 2020;42(5):1–25.
   Web of Science ®Google Scholar
• Lim WYS, Cao J, Suwardi A, et al. Recent advances in laser-cladding of metal alloys for protective coating and additive manufacturing. J. Adhes. Sci. Technol. 2022;36(23–24):2482–2504.
   Web of Science ®Google Scholar
• Shen C, Hua X, Li F, et al. Modification and characterisation of the Al concentration induced precipitate in the Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process. Mater Charact. 2021;178:111270.
   Web of Science ®Google Scholar
• Xiong J, Zhang G, Qiu Z, et al. Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing. J Clean Prod. 2013;41:82–88.
   Web of Science ®Google Scholar
• Xiong J, Zhang G. Adaptive control of deposited height in GMAW-based layer additive manufacturing. J Mater Process Technol. 2014;214(4):962–968.
   Web of Science ®Google Scholar
• Xiong J, Yin Z, Zhang W. Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing. J Mater Process Technol. 2016;233:100–106.
   Web of Science ®Google Scholar
• Xiong J, Yin Z, Zhang W. Forming appearance control of arc striking and extinguishing area in multi-layer single-pass GMAW-based additive manufacturing. Int J Adv Manuf Technol. 2016;87(1–4):579–586.
   Web of Science ®Google Scholar
• Raja M, Tiwari Y, Mukherjee M, et al. Effect of bidirectional and switchback deposition strategies on microstructure and mechanical properties of wire arc additive manufactured Inconel 625. Int J Adv Manuf Technol. 2022;119(7–8):4845–4861.
   Web of Science ®Google Scholar
• Wang Z, Chevret SZ, Leonard F, et al. Improvement strategy for the geometric accuracy of bead’s beginning and end parts in wire-arc additive manufacturing (WAAM). Int J Adv Manuf Technol. 2022;118(7–8):2139–2151.
   Web of Science ®Google Scholar
• Yin X, He G, Meng W, et al. Comparison study of low-heat-input wire arc-fabricated nickel-based alloy by cold metal transfer and plasma arc. J Mater Eng Perform. 2020;29(7):4222–4232.
   Web of Science ®Google Scholar
• Chen Z, Li C, Han X, et al. Sensitivity analysis of the MIG welding process parameters based on response surface method. J Adhes Sci Technol. 2021;35(6):590–609.
   Web of Science ®Google Scholar
• Roshan R, Naik AK, Saxena KK, et al. Effect of welding speed and wire feed rate on arc characteristics, weld bead and microstructure in standard and pulsed gas metal arc welding. J Adhes Sci Technol. 2023;1–18. https://doi.org/10.1080/01694243.2023.2192314.
   Web of Science ®Google Scholar
• Song YA, Park S. Experimental investigations into rapid prototyping of composites by novel hybrid deposition process. J Mater Process Technol. 2006;171(1):35–40.
   Web of Science ®Google Scholar
• Suryakumar S, Karunakaran KP, Bernard A, et al. Weld bead modeling and process optimisation in hybrid layered manufacturing. CAD Comput Aided Des. 2011;43(4):331–344.
   Web of Science ®Google Scholar
• Tang S, Wang G. A novel method of bead modelling and control for wire and arc additive manufacturing. Rapid Prototyp J. 2021;27(2):311–320.
   Web of Science ®Google Scholar
• Cao Y, Zhu S, Liang X, et al. Overlapping model of beads and curve fitting of bead section for rapid manufacturing by robotic MAG welding process. Robot Comput Integr Manuf. 2011;27(3):641–645.
   Web of Science ®Google Scholar
• Xiong J, Zhang G, Gao H, et al. Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing. Robot Comput Integr Manuf. 2013;29(2):417–423.
   Web of Science ®Google Scholar
• Ding D, Pan Z, Cuiuri D, et al. A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM). Robot Comput Integr Manuf. 2015;31:101–110.
   Web of Science ®Google Scholar
• Li Y, Han Q, Zhang G, et al. A layers-overlapping strategy for robotic wire and arc additive manufacturing of multi-layer multi-bead components with homogeneous layers. Int J Adv Manuf Technol. 2018;96(9–12):3331–3344.
   Web of Science ®Google Scholar
• Lambiase F, Scipioni SI, Paoletti A. Accurate prediction of the bead geometry in wire arc additive manufacturing process. Int J Adv Manuf Technol. 2022;119(11–12):7629–7639.
   Web of Science ®Google Scholar
• Bambach M, Sizova I, Sydow B, et al. Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing. J Mater Process Technol. 2020;282:116689.
   Web of Science ®Google Scholar
• Duarte VR, Rodrigues TA, Schell N, et al. Hot forging wire and arc additive manufacturing (HF-WAAM). Addit Manuf. 2020;35:101193.
   Web of Science ®Google Scholar
• Elmer JW, Gibbs G. Mechanical rolling and annealing of Wire-Arc additively manufactured stainless steel plates. Sci Technol Weld Join. 2022;27(1):14–21.
   Web of Science ®Google Scholar
• Xie Y, Zhang H, Zhou F. Improvement in geometrical accuracy and mechanical property for arc-based additive manufacturing using metamorphic rolling mechanism. J Manuf Sci Eng Trans. 2016;138(11):1–8.
   Web of Science ®Google Scholar
• Dirisu P, Supriyo G, Martina F, et al. Wire plus arc additive manufactured functional steel surfaces enhanced by rolling. Int J Fatigue. 2020;130:105237.
   Web of Science ®Google Scholar
• Nikam PP, Arun D, Ramkumar KD, et al. Microstructure characterisation and tensile properties of CMT-based wire plus arc additive manufactured ER2594. Mater Charact. 2020;169:110671.
   Google Scholar
• Wu W, Xue J, Yao P. A comparative study on single- and Double-Arc deposition processes. Mater Manuf Process. 2020;35(3):346–353.
   Web of Science ®Google Scholar
• Bellamkonda PN, Sudersanan M, Visvalingam B. A study on tensile properties and microstructural characteristics of wire arc additive manufactured low carbon steel cylindrical components. Weld Int. 2022;36(8):443–454.
   Google Scholar
• Wu D, An Q, Du F, et al. Microstructure and corrosion resistance of stainless steel produced by bypass coupling twin‑wire indirect arc additive manufacturing. Int J Adv Manuf Technol. 2022;119(3-4):2159–2172.
   Web of Science ®Google Scholar
• Ma C, Yan Y, Yan Z, et al. Investigation of bypass-coupled double-pulsed directed energy deposition of Al-Mg alloys. Addit Manuf. 2022;58:103058.
   Web of Science ®Google Scholar
• Guo M, Jia C, Zhou J, et al. Investigating the generation process of molten droplets and arc plasma in the confined space during compulsively constricted WAAM. J Mater Process Technol. 2020;275:116355.
   Web of Science ®Google Scholar
• Jia C, Liu W, Chen M, et al. Investigation on arc plasma, droplet, and molten pool behaviours in compulsively constricted WAAM. Addit Manuf. 2020;34:101235.
   Web of Science ®Google Scholar
• Liu W, Jia C, Guo M, et al. Compulsively constricted WAAM with arc plasma and droplets ejected from a narrow space. Addit. Manuf. 2019;27:109–117.
   Web of Science ®Google Scholar
• Zhou J, Jia C, Guo M, et al. Investigation of the WAAM processes features based on an indirect arc between two non-consumable electrodes. Vacuum. 2021;183:109851.
   Web of Science ®Google Scholar
• Xu G, Xu X, Lv X, et al. A novel modification to TW-GIA for controlling heat input of base metal. Mater Manuf Process. 2023;38(2):220–227.
   Web of Science ®Google Scholar
• Rodrigues TA, Duarte VR, Miranda RM, et al. Ultracold-wire and arc additive manufacturing (UC-WAAM). J Mater Process Technol. 2021;296:117196.
   Web of Science ®Google Scholar
• Zhang Z, Sun C, Xu X, et al. Surface quality and forming characteristics of thin-wall aluminium alloy parts manufactured by laser assisted MIG arc additive manufacturing. Int J Light Mater Manuf. 2018;1(2):89–95.
   Google Scholar
• Xiong J, Li Y, Li R, et al. Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing. J Mater Process Technol. 2018;252:128–136.
   Web of Science ®Google Scholar
• Pattanayak S, Sahoo SK, Sahoo AK. Experimental investigation on deposits of ER70S-6 wire on SiO2 substrate using non-transferred arc-based wire arc additive manufacturing. Int J Adv Manuf Technol. 2022;123(9–10):3527–3552.
   Web of Science ®Google Scholar
• Boruah PJ, Khanikar RR, Bailung H. Synthesis and characterisation of oxygen vacancy induced narrow bandgap tungsten oxide (WO3−x) nanoparticles by plasma discharge in liquid and its photocatalytic activity. Plasma Chem Plasma Process. 2020;40(4):1019–1036.
   Web of Science ®Google Scholar
• Khan H, Zavabeti A, Wang Y, et al. Quasi physisorptive two dimensional tungsten oxide nanosheets with extraordinary sensitivity and selectivity to NO2. Nanoscale. 2017;9(48):19162–19175.
   PubMed Web of Science ®Google Scholar
• Nemani AV, Ghaffari M, Nasiri A. Comparison of microstructural characteristics and mechanical properties of shipbuilding steel plates fabricated by conventional rolling versus wire arc additive manufacturing. Addit Manuf. 2020;32:101086.
   Web of Science ®Google Scholar
• Lehmann T, Jain A, Jain Y, et al. Concurrent geometry- and material-based process identification and optimisation for robotic CMT-based wire arc additive manufacturing. Mater Des. 2020;194:108841.
   Web of Science ®Google Scholar
• Raut LP, Taiwade RV. Microstructure and mechanical properties of wire arc additively manufactured bimetallic structure of austenitic stainless steel and low carbon steel. J Mater Eng Perform. 2022;31(10):8531–8541.
   Web of Science ®Google Scholar
• Rafieazad M, Ghaffari M, Nemani AV, et al. Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing. Int J Adv Manuf Technol. 2019;105(5–6):2121–2134.
   Web of Science ®Google Scholar
• Adin MS, Okumuş M. Investigation of microstructural and mechanical properties of dissimilar metal weld between AISI 420 and AISI 1018 steels. Arab J Sci Eng. 2022;47(7):8341–8350.
   Web of Science ®Google Scholar
• Kumar S, Ohlan A, Kumar P, et al. Improved electromagnetic interference shielding response of polyaniline containing magnetic nano-ferrites. J Supercond Nov Magn. 2020;33(4):1187–1198.
   Web of Science ®Google Scholar
• Montevecchi F, Venturini G, Grossi N, et al. Heat accumulation prevention in wire–arc–additive–manufacturing using air jet impingement. Manuf Lett. 2018;17:14–18.
   Google Scholar
• Dutta K, Mishra SK, Dwivedi PK, et al. On the characteristic features of dislocations during ratcheting–creep interaction. J Mater Eng Perform. 2021;30(10):7376–7385.
   Web of Science ®Google Scholar
• Ungar T, Leoni M, Scardi P. The dislocation model of strain anisotropy in whole powder-pattern fitting: the case of an Li–Mn cubic spinel. J Appl Crystallogr. 1999;32(2):290–295.
   Web of Science ®Google Scholar
• Kishor R, Sahu L, Dutta K, et al. Assessment of dislocation density in asymmetrically cyclic loaded non-conventional stainless steel using X-ray diffraction profile analysis. Mater Sci Eng A. 2014;598:299–303.
   Web of Science ®Google Scholar
• Prevey PS. X-Ray Diffraction residual stress techniques. Mater Charact. 2018;380–392.
   Google Scholar
• Esteves L, Paiva PRP, Viana AKdN, et al. Rietveld and impedance analysis of cold and hot rolled duplex and lean duplex steels for application in paper and pulp industry. Mat Res. 2016;20(1):30–35.
   Web of Science ®Google Scholar
• Sarangi SS, Lavakumar A. Application of Rietveld refinement and Williamson Hall analysis in ultra-low carbon to high carbon steels. MSF. 2019;969:3–8.
   Google Scholar
• Hu Z, Qin X, Shao T, et al. Understanding and overcoming of abnormity at start and end of the weld bead in additive manufacturing with GMAW. Int J Adv Manuf Technol. 2018;95(5–8):2357–2368.
   Web of Science ®Google Scholar
• Van D, Dinda GP, Park J, et al. Enhancing hardness of Inconel 718 deposits using the aging effects of cold metal transfer-based additive manufacturing. Mater Sci Eng A. 2020;776:139005.
   Web of Science ®Google Scholar
• Zuo X, Zhang W, Chen Y, et al. Wire-based directed energy deposition of NiTiTa shape memory alloys: microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties. Addit Manuf. 2022;59:103115.
   Web of Science ®Google Scholar
• Gecu R, Atapek SH, Karaaslan A. Influence of preform preheating on dry sliding wear behavior of 304 stainless steel reinforced A356 aluminum matrix composite produced by melt infiltration casting. Tribol Int. 2017;115:608–618.
   Web of Science ®Google Scholar