Effect of silane surface modification on the bonding properties of the hot-pressing molded polycarbonate/aluminum alloy hybrid

References

• Zhang S, Chen W. Assessing the energy transition in China towards carbon neutrality with a probabilistic framework. Nat Commun. 2022;13(1):87. doi: 10.1038/s41467-021-27671-0.
   PubMed Web of Science ®Google Scholar
• Liu Z, Deng Z, He G, et al. Challenges and opportunities for carbon neutrality in China. Nat Rev Earth Environ. 2021;3(2):141–155. doi: 10.1038/s43017-021-00244-x.
   Google Scholar
• Wei Y-M, Chen K, Kang J-N, et al. Policy and management of carbon peaking and carbon neutrality: a literature review. Engineering. 2022;14:52–63. doi: 10.1016/j.eng.2021.12.018.
   Web of Science ®Google Scholar
• Grujicic M, Sellappan V, Omar MA, et al. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components. J Mater Process Technol. 2008;197(1-3):363–373. doi: 10.1016/j.jmatprotec.2007.06.058.
   Web of Science ®Google Scholar
• Fonseca JH, Han G, Quagliato L, et al. Design and numerical evaluation of recycled-carbon-fiber-reinforced polymer/metal hybrid engine cradle concepts. Int J Mech Sci. 2019;163:105115. doi: 10.1016/j.ijmecsci.2019.105115.
   Web of Science ®Google Scholar
• Rathnasabapathy M, Mouritz AP, Orifici AC. Finite element modelling of the impact response of fibre metal laminates under tension preloading. Compos Part A: Appl Sci Manuf. 2022;157:106930. doi: 10.1016/j.compositesa.2022.106930.
   Web of Science ®Google Scholar
• Lambiase F. Joinability of different thermoplastic polymers with aluminium AA6082 sheets by mechanical clinching. Int J Adv Manuf Technol. 2015;80(9-12):1995–2006. doi: 10.1007/s00170-015-7192-1.
   Web of Science ®Google Scholar
• Lambiase F, Ko D-C. Two-steps clinching of aluminum and carbon fiber reinforced polymer sheets. Compos Struct. 2017;164:180–188. doi: 10.1016/j.compstruct.2016.12.072.
   Web of Science ®Google Scholar
• De Cicco D, Taheri F. Enhancement of magnesium-composite bond-interface by a simple combined abrasion and coating method. J Magnesium Alloys. 2019;7(2):227–239. doi: 10.1016/j.jma.2019.02.008.
   Web of Science ®Google Scholar
• Adin M, Kılıçkap E. Strength of double-reinforced adhesive joints. Mater Test. 2021;63(2):176–181. doi: 10.1515/mt-2020-0024.
   Web of Science ®Google Scholar
• Adin H, Adin M. Effect of particles on tensile and bending properties of jute epoxy composites. Mater Test. 2022;64(3):401–411. doi: 10.1515/mt-2021-2038.
   Web of Science ®Google Scholar
• Lasprilla-Botero J, Álvarez-Láinez M, Acosta DA, et al. Water-based adhesive formulations for rubber to metal bonding developed by statistical design of experiments. Int J Adhes Adhes. 2017;73:58–65. doi: 10.1016/j.ijadhadh.2016.11.007.
   Web of Science ®Google Scholar
• Najafi M, Darvizeh A, Ansari R. Characterization of moisture effects on novel agglomerated Cork core sandwich composites with fiber metal laminate facesheets. J Sandwich Struct Mater. 2020;22(6):1709–1742. doi: 10.1177/1099636218789613.
   Web of Science ®Google Scholar
• Xu D, Yang W, Li X, et al. Surface nanostructure and wettability inducing high bonding strength of polyphenylene sulfide-aluminum composite structure. Appl Surf Sci. 2020;515:145996. doi: 10.1016/j.apsusc.2020.145996.
   Web of Science ®Google Scholar
• Zhou M, Xiong X, Drummer D, et al. Interfacial interaction and joining property of direct injection-molded polymer-metal hybrid structures: a molecular dynamics simulation study. Appl Surf Sci. 2019;478:680–689. doi: 10.1016/j.apsusc.2019.01.286.
   Web of Science ®Google Scholar
• Tan X, Zhang J, Shan J, et al. Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel. Compos Part B: Eng. 2015;70:35–43. doi: 10.1016/j.compositesb.2014.10.023.
   Web of Science ®Google Scholar
• Rodríguez-Vidal E, Sanz C, Soriano C, et al. Effect of metal micro-structuring on the mechanical behavior of polymer–metal laser T-joints. J Mater Process Technol. 2016;229:668–677. doi: 10.1016/j.jmatprotec.2015.10.026.
   Web of Science ®Google Scholar
• Nagatsuka K, Yoshida S, Tsuchiya A, et al. Direct joining of carbon-fiber–reinforced plastic to an aluminum alloy using friction lap joining. Compos Part B: Eng. 2015;73:82–88. doi: 10.1016/j.compositesb.2014.12.029.
   Web of Science ®Google Scholar
• Goushegir SM, dos Santos JF, Amancio-Filho ST. Influence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap joints. Mater Des. 2015;83:431–442. doi: 10.1016/j.matdes.2015.06.044.
   Web of Science ®Google Scholar
• Lionetto F, Balle F, Maffezzoli A. Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites. J Mater Process Technol. 2017;247:289–295. doi: 10.1016/j.jmatprotec.2017.05.002.
   Web of Science ®Google Scholar
• Adin M. A parametric study on the mechanical properties of MIG and TIG welded dissimilar steel joints. J Adhes Sci Technol. 2023;6:1–24. doi: 10.1080/01694243.2023.2221391.
   Google Scholar
• Qiu J, Cai D, Zhang X, et al. Experimental study on properties and structure of magnesium alloy/PC/ABS hybrid materials prepared by hot-press molding technology. J Adhes Sci Technol. 2023;7:1–16. doi: 10.1080/01694243.2023.2165230.
   Google Scholar
• Ho Y-C, Yanagimoto J. Effect of unidirectional prepreg size on punching of pseudo-ductile CFRP laminates and CFRP/metal hybrid composites. Compos Struct. 2018;186:246–255. doi: 10.1016/j.compstruct.2017.11.042.
   Web of Science ®Google Scholar
• Kimura F, Kadoya S, Kajihara Y. Effects of molding conditions on injection molded direct joining under various surface fine-structuring. Int J Adv Manuf Technol. 2019;101(9-12):2703–2712. doi: 10.1007/s00170-018-3154-8.
   Web of Science ®Google Scholar
• Chen W, Kimura F, Kajihara Y. Effect of nanostructured zinc coating on high joining strength of polymer/galvanized high-strength steel composite via injection molding. J Manuf Processes. 2023;85:295–305. doi: 10.1016/j.jmapro.2022.11.044.
   Web of Science ®Google Scholar
• Derazkola HA, Khodabakhshi F. Development of fed friction-stir (FFS) process for dissimilar nanocomposite welding between AA2024 aluminum alloy and polycarbonate (PC). J Manuf Processes. 2020;54:262–273. doi: 10.1016/j.jmapro.2020.03.020.
   Web of Science ®Google Scholar
• Lionetto F, Mele C, Leo P, et al. Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization. Compos Part B: Eng. 2018;144:134–142. doi: 10.1016/j.compositesb.2018.02.026.
   Web of Science ®Google Scholar
• Cai D, Wen Y, Qiu J, et al. Mechanical property and structure of polycarbonate/aluminum alloy hybrid prepared by ultrasound-assisted hot-pressing technology. J Adhes. 2023;99(8):1356–1379. doi: 10.1080/00218464.2022.2107426.
   Web of Science ®Google Scholar
• Li X, Gong N, Yang C, et al. Aluminum/polypropylene composites produced through injection molding. J Mater Process Technol. 2018;255:635–643. doi: 10.1016/j.jmatprotec.2018.01.008.
   Web of Science ®Google Scholar
• Kim W-S, Yun I-H, Lee J-J, et al. Evaluation of mechanical interlock effect on adhesion strength of polymer–metal interfaces using micro-patterned surface topography. Int J Adhes Adhes. 2010;30(6):408–417. doi: 10.1016/j.ijadhadh.2010.05.004.
   Web of Science ®Google Scholar
• Zou X, Sariyev B, Chen K, et al. Enhanced interfacial bonding strength between metal and polymer via synergistic effects of particle anchoring and chemical bonding. J Manuf Processes. 2021;68:558–568. doi: 10.1016/j.jmapro.2021.05.058.
   Web of Science ®Google Scholar
• Saborowski E, Dittes A, Steinert P, et al. Effect of metal surface topography on the interlaminar shear and tensile strength of aluminum/polyamide 6 Polymer-Metal-Hybrids. Materials (Basel). 2019;12(18):2963. doi: 10.3390/ma12182963.
   PubMed Web of Science ®Google Scholar
• Balordi M, Cammi A, Santucci de Magistris G, et al. Role of micrometric roughness on anti-ice properties and durability of hierarchical super-hydrophobic aluminum surfaces. Surf Coat Technol. 2019;374:549–556. doi: 10.1016/j.surfcoat.2019.06.001.
   Web of Science ®Google Scholar
• Lambiase F, Genna S. Experimental analysis of laser assisted joining of Al-Mg aluminium alloy with polyetheretherketone (PEEK). Int J Adhes Adhes. 2018;84:265–274. doi: 10.1016/j.ijadhadh.2018.04.004.
   Web of Science ®Google Scholar
• Heckert A, Zaeh MF. Laser surface pre-treatment of aluminium for hybrid joints with glass fibre reinforced thermoplastics. Phys Procedia. 2014;56:1171–1181. doi: 10.1016/j.phpro.2014.08.032.
   Google Scholar
• Golru SS, Attar MM, Ramezanzadeh B. Effects of different surface cleaning procedures on the superficial morphology and the adhesive strength of epoxy coating on aluminium alloy 1050. Prog Org Coat. 2015;87:52–60. doi: 10.1016/j.porgcoat.2015.05.005.
   Web of Science ®Google Scholar
• Hu Y, Yuan B, Cheng F, et al. NaOH etching and resin pre-coating treatments for stronger adhesive bonding between CFRP and aluminium alloy. Compos Part B: Eng. 2019;178:107478. doi: 10.1016/j.compositesb.2019.107478.
   Web of Science ®Google Scholar
• Zhu W, Xiao H, Wang J, et al. Characterization and properties of AA6061-based fiber metal laminates with different aluminum-surface pretreatments. Compos Struct. 2019;227:111321. doi: 10.1016/j.compstruct.2019.111321.
   Web of Science ®Google Scholar
• Chen J, Huang J, Wu Y, et al. Effect of surface anodizing on the bonding properties of aluminum alloy/glass-fiber reinforced polypropylene random copolymer hybrid joints. Int J Adhes Adhes. 2023;123:103361. doi: 10.1016/j.ijadhadh.2023.103361.
   Web of Science ®Google Scholar
• Wen Y, Li S, Huang J, et al. Micro-nano interfacial mechanical interlocking structure-property of the ultrasonic-assisted hot press molded polypropylene/aluminum alloy hybrid. J Adhes Sci Technol. 2023;37(3):452–468. doi: 10.1080/01694243.2022.2034711.
   Web of Science ®Google Scholar
• Bonpain B, Stommel M. Influence of surface roughness on the shear strength of direct injection molded plastic-aluminum hybrid-parts. Int J Adhes Adhes. 2018;82:290–298. doi: 10.1016/j.ijadhadh.2018.02.003.
   Web of Science ®Google Scholar
• Xie Y, Zhang J, Zhou T. Large-area mechanical interlocking via nanopores: ultra-high-strength direct bonding of polymer and metal materials. Appl Surf Sci. 2019;492:558–570. doi: 10.1016/j.apsusc.2019.06.246.
   Web of Science ®Google Scholar
• Chen J, Du K, Chen X, et al. Influence of surface microstructure on bonding strength of modified polypropylene/aluminum alloy direct adhesion. Appl Surf Sci. 2019;489:392–402. doi: 10.1016/j.apsusc.2019.05.270.
   Web of Science ®Google Scholar
• Qiu J, Li S, Cai D, et al. Influence of silane coupling agents on the interfacial structure and properties of modified polypropylene/aluminum alloy composites prepared by hot-press molding. J Adhes. 2023;99(13):1973–1995. doi: 10.1080/00218464.2023.2165442.
   Web of Science ®Google Scholar
• Atz-Dick P, Konrath A, Rátiva Melo Y, et al. Aluminum anodizing with simultaneous silanization for increased hydrophobicity and corrosion protection. Appl Surf Sci. 2022;593:153392. doi: 10.1016/j.apsusc.2022.153392.
   Web of Science ®Google Scholar
• Li X, Xu D, Gong N, et al. Improving the strength of injection molded aluminum/polyphenylene sulfide lap joints dependence on surface microstructure and composition. Mater Des. 2019;179:107875. doi: 10.1016/j.matdes.2019.107875.
   Web of Science ®Google Scholar