Experimental investigation on the mechanical properties of resistance seam welding of thin sheet

References

• Al-Jader MA. Investigation of spot welding electrode tip wear and a non-destructive test of plastic joining in the automotive industry. Liverpool: Liverpool John Moores University; 2014.
   Google Scholar
• Pal M, Sehgal S, Kumar H, et al. Use of nickel filler powder in joining SS304-SS316 through microwave hybrid heating technique. Met Powder Rep. 2021;76: s 18–23. doi:10.1016/j.mprp.2020.10.001.
   Google Scholar
• Yang J, He J, Wang Z, et al. The resistance welding of CF/epoxy laminate and 6063Al alloy: morphology, mechanical property and interface evolution. J Adhes Sci Technol. 2022;36(13):1403–1417. doi:10.1080/01694243.2021.1970982.
   Web of Science ®Google Scholar
• Gupta MK. Effects of tool profile on mechanical properties of aluminium alloy Al 1120 friction stir welds. J Adhes Sci Technol. 2020;34(18):2000–2010. doi:10.1080/01694243.2020.1749448.
   Web of Science ®Google Scholar
• Xiong X, Wang D, Wei J, et al. Resistance welding technology of fiber reinforced polymer composites: a review. J Adhes Sci Technol. 2021;35(15):1593–1619. doi:10.1080/01694243.2020.1856514.
   Web of Science ®Google Scholar
• Cui M, Zheng Z, Li S, et al. Joining mechanism, microstructure, and mechanical properties of AZ31/6061 joint prepared by pouring fusion welding process assisted with Zn-xSn brazing filler. J Adhes Sci Technol. 2023:1–37. doi:10.1080/01694243.2023.2253636.
   Google Scholar
• Xue C, Zheng Y, Lu X, et al. Interface structure and shear strength of brazed joints between cermets and 45 steel in formed Cu-Zn-Ni-Mn-Si-Mo filler metal. J Adhes Sci Technol. 2023;37(1):72–82. doi:10.1080/01694243.2021.2017655.
   Web of Science ®Google Scholar
• Bagha L, Sehgal S, Thakur A, et al. Low cost joining of SS304-SS304 through microwave hybrid heating without filler-powder. Eng Res Express. 2019;1(2):025035. doi:10.1088/2631-8695/ab551d.
   Google Scholar
• Kumar A, Sehgal S, Singh S, et al. Joining of SS304-SS316 through novel microwave hybrid heating technique without filler material. Mater Today: proc. 2020;26:2502–2505. doi:10.1016/j.matpr.2020.02.532.
   Google Scholar
• Waddell W, Williams NT. High speed resistance seam welding of uncoated and coated steels. Report no. EUR; Office for Official Publications of the European Communities, Brussels. 1988;11550.
   Google Scholar
• Groover MP. Fundamentals of modern manufacturing: materials, processes, and systems. John Wiley & Sons, USA; 2020 Jul 15.
   Google Scholar
• Zeemansky MW, Dittman RH. Heat and thermodynamics: an intermediate textbook. McGraw-Hill,USA; 1997.
   Google Scholar
• Hamedi M, Atashparva M. A review of electrical contact resistance modeling in resistance spot welding. Weld World. 2017;61(2):269–290. doi:10.1007/s40194-016-0419-4.
   Web of Science ®Google Scholar
• Welding EB, Handbook AS. Welding, brazing, and soldering. ASM Int. 1993;6:254.
   Google Scholar
• American Society for Metals. Welding, brazing, and soldering. In Ernest F. Nippes (Ed): Metals handbook. Asm Intl, USA.6;1-1152; 1983.
   Google Scholar
• Ozair S, Deshpande NH. A study of different parameters of the seam welding process for reducing welding current. Int Res J Eng Technol. 2018;5(6):2787–2790.
   Google Scholar
• Koley S, Akhtar MT, Kumar N, et al. Effect of secondary coating on weldability, joint performance, and electrode life in resistance seam welding of galvannealed interstitial free steel. J Mater Eng Perform. 2022;31:1–3.
   Web of Science ®Google Scholar
• Wang WQ, Yamaguchi T, Nishio K. Microstructure and wear behavior of cermet/iron alloy cladding layers on A6061 alloy coated by resistance seam welding method. Acta Metall Sin. 2015;28(4):414–423. doi:10.1007/s40195-015-0210-3.
   Web of Science ®Google Scholar
• Mira-Aguiar T, Leitão C, Rodrigues DM. Solid-state resistance seam welding of galvanized steel. Int J Adv Manuf Technol. 2016;86(5–8):1385–1391. doi:10.1007/s00170-015-8294-5.
   Web of Science ®Google Scholar
• Abdel-Aleem H, Kato M, Nishio K, et al. Joining of 1050/5052 by resistance seam welding and materials evaluation of joints. Weld Int. 2005;19(3):199–204. doi:10.1533/wint.2005.3400.
   Google Scholar
• Khosravi A, Halvaee A, Hasannia MH. Weldability of electrogalvanized versus galvanized interstitial free steel sheets by resistance seam welding. Mater Des. 2013;44:90–98. doi:10.1016/j.matdes.2012.06.043.
   Web of Science ®Google Scholar
• Zhao D, Yamaguchi T, Shu J, et al. Rapid fabrication of the continuous AlFeCrCoNi high entropy alloy coating on aluminum alloy by resistance seam welding. Appl Surf Sci. 2020;517:145980. doi:10.1016/j.apsusc.2020.145980.
   Web of Science ®Google Scholar
• Wang W, Zeng X, Li Y, et al. Fabrication, microstructure, and wear performance of WC-Fe composite/metal coating fabricated by resistance seam welding. Mater Charact. 2017;134:182–193. doi:10.1016/j.matchar.2017.10.021.
   Web of Science ®Google Scholar
• Fazzini PG, Cisilino AP, Otegui JL. Experimental validation of the influence of lamination defects in electrical resistance seam welded pipelines. Int J Press Vessels Pip. 2005;82(12):896–904. doi:10.1016/j.ijpvp.2005.07.006.
   Web of Science ®Google Scholar
• Radhika A, Thenmozhi G, Balakarthikeyan M, et al. Enhancement of welding strength through electric current and resistance on ERSW process using chromium steel. Mater Today: proc. 2020;33:4781–4783. doi:10.1016/j.matpr.2020.08.363.
   Google Scholar
• Kefallinou Z. The impact of curing time on the electrochemical behaviour of intact epoxy-phenolic coatings on tinplate and tin-free steel. Manchester: The University of Manchester; 2017.
   Google Scholar
• Mittal A. Steel for Packaging, Product catalogue, 2013.
   Google Scholar
• Kayafas I. Corrosion product removal from steel fracture surfaces for metallographic examination. Corrosion. 1980;36(8):443–445. doi:10.5006/0010-9312-36.8.443.
   Web of Science ®Google Scholar