36
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Waste to wealth: development of cladding flux from steel slag for submerged arc welding

&
Received 21 Mar 2024, Accepted 09 May 2024, Published online: 20 May 2024

References

  • World Steel Association. Fact sheet: steel industry co-products. China; 2021. Available from: https://worldsteel.org/wp-content/uploads/Fact-sheet-Steel-industry-co-products.pdf
  • Guo J, Bao Y, Wang M. Steel slag in China: treatment, recycling, and management. Waste Manag. 2018;78:318–330. doi: 10.1016/j.wasman.2018.04.045.
  • Shu K, Sasaki K. Occurrence of steel converter slag and its high value-added conversion for environmental restoration in China: a review. J Clean Prod. 2022;373:133876. doi: 10.1016/j.jclepro.2022.133876.
  • Gao W, Zhou W, Lyu X, et al. Comprehensive utilization of steel slag: a review. Powder Technol. 2023;422:118449. doi: 10.1016/j.powtec.2023.118449.
  • Dhoble YN, Ahmed S. Review on the innovative uses of steel slag for waste minimization. J Mater Cycles Waste Manag. 2018;20(3):1373–1382. doi: 10.1007/s10163-018-0711-z.
  • Barba-Gutiérrez Y, Adenso-Díaz B, Hopp M. An analysis of some environmental consequences of European Electrical and Electronic Waste Regulation. Resour Conserv Recycl. 2008;52(3):481–495. doi: 10.1016/j.resconrec.2007.06.002.
  • Saini S, Singh K. Some feasibility studies for recycling of steel slag as a useful flux for submerged arc welding. J Adv Manuf Syst. 2020;19(02):277–289. doi: 10.1142/S0219686720500146.
  • Saini S, Singh K. Waste to wealth: recycling of steel slag as flux for the submerged arc welding process and its effect on mechanical and metallurgical properties of welds. Proc Inst Mech Eng C J Mech Eng Sci. 2022;236(16):8980–8990. doi: 10.1177/09544062221089253.
  • Saini S, Singh K, Garg J. Experimental investigation and optimization of weld bead shape factor and form factor using recycled steel slag as a flux in submerged arc welding process. IOP Conf Ser Mater Sci Eng. 2022;1225(1):012038. doi: 10.1088/1757-899X/1225/1/012038.
  • Saini S, Singh K. Utilisation of steel slag as welding flux and its chemical and thermal characterisation. Mater Sci Technol. 2023;39(3):369–380. doi: 10.1080/02670836.2022.2116528.
  • Boriwal L, Sarviya RM, Mahapatra MM. Optimization of weld bonding process parameters of austenitic stainless steel 304L and low carbon steel sheet dissimilar joints. J Adhes Sci Technol. 2017;31(14):1591–1616. doi: 10.1080/01694243.2016.1266844.
  • An Q, Fan KY, Ge YF, et al. Microstructure and mechanical properties of stainless steel clad plate joints produced by TIG and MAG hybrid welding. J Adhes Sci Technol. 2020;34(6):670–685. doi: 10.1080/01694243.2019.1677087.
  • Roshan R, Kumar Naik A, Kumar Saxena K, et al. Effect of welding speed and wire feed rate on arc characteristics, weld bead and microstructure in standard and pulsed gas metal arc welding. J Adhes Sci Technol. 2023;37(23):3297–3314. doi: 10.1080/01694243.2023.2192314.
  • Om H, Pandey S. Effect of heat input on dilution and heat affected zone in submerged arc welding process. Sādhanā. 2013;38:1369–1391.
  • Brooks JA, Lambert FJJr. The effects of phosphorus, sulfur and ferrite content on weld cracking of type 309 stainless steel. Weld J. 1978;57(5):139s–143s.
  • De Rissone NM, Farias JP, Bott ID, et al. ANSI/AWS A5.1-91 E6013 rutile electrodes: the effect of calcite. Weld J Suppl. 2002;81(7):113S–124S.
  • Singh B, Khan ZA, Siddiquee AN, et al. Experimental study on effect of flux composition on element transfer during submerged arc welding. Sādhanā. 2018;43(2):1–2. doi: 10.1007/s12046-018-0782-5.
  • Kohno R, Takami T, Mori N, et al. New fluxes of improved weld metal toughness for HSLA steels. Weld J. 1982;61(12):373.
  • Ferrera KP, Olson DL. Performance of the MnO–SiO2–CaO system as a welding flux. Weld Res Suppl. 1975;54:211s–215s.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.