Microstructural analysis and mechanical characterization of dissimilar welds between nickel-based and steel-based superalloys post-cryogenic treatment using hotwire GTAW

References

• Agarwal DC, Herda WR, Kloewer J. 2000 Case histories on solving severe corrosion problems in the CPI by an advanced NiCrMo Alloy 59 UNS N06059. CORROSION 2000. One Petro.
   Google Scholar
• Hübner P, Behrens R, Alves H, et al. 2022AMPP CORROSION. 2022, p. D031S034R005. AMPP.
   Google Scholar
• VDM Metals Datasheet. Alloy 59 Nicrofer 5923 hMo. no. 4130. 2005; [Online]. Available from: http://vdmmetals.com/fileadmin/user_upload/Downloads/Data_Sheets/Data_Sheet_VDM_Alloy_59.pdf
   Google Scholar
• Nage DD, Raja VS. Effect of nitrogen addition on the stress corrosion cracking behavior of 904 L stainless steel welds in 288 C deaerated water. Corros Sci. 2006;48(8):2317–2331. doi: 10.1016/j.corsci.2005.08.001.
   Web of Science ®Google Scholar
• Shi W, Wang J, Jiang R, et al. Anticorrosion properties of the low-temperature glow plasma nitriding layer on aisi 904l austenitic stainless steel in hydrofluoric acid obtained at various nh3 pressures. Coatings. 2020;10(12):1156. doi: 10.3390/coatings10121156.
   Web of Science ®Google Scholar
• Wang J, Shi W, Xiang S, et al. Study of the corrosion behaviour of sensitized 904L austenitic stainless steel in Cl-solution. Corros Sci. 2021;181:109234. doi: 10.1016/j.corsci.2020.109234.
   Web of Science ®Google Scholar
• Lin HL, Wu TM. Effects of activating flux on weld bead geometry of Inconel 718 alloy TIG welds. Mater Manuf Process. 2012;27(12):1457–1461. doi: 10.1080/10426914.2012.677914.
   Web of Science ®Google Scholar
• Voigt AL, da Cunha TV, Niño CE. Conception, implementation and evaluation of induction wire heating system applied to hot wire GTAW (IHW-GTAW). J Mater Process Tech. 2020;281:116615. doi: 10.1016/j.jmatprotec.2020.116615.
   Web of Science ®Google Scholar
• Bin Reyaz MS, Sinha AN. An experimental investigation on mechanical characteristics and wear behaviour of TIG welded dissimilar aluminum alloys. J Adhes Sci Technol. 2024;38(8):1211–1246. doi: 10.1080/01694243.2023.2251782.
   Web of Science ®Google Scholar
• Padmanaban A, Neelakandan B, Kandasamy D. A study on process characteristics and performance of hot wire gas tungsten arc welding process for high temperature materials. Mat Res. 2016;20(1):76–87. doi: 10.1590/1980-5373-mr-2016-0321.
   Web of Science ®Google Scholar
• Yadav A, Srivastava M, Jain PK, et al. Investigation of bead morphology and mechanical behaviour for metal inert gas welding-based WAAM in pulsed mode metal transfer on 316LSi stainless steel. J Adhes Sci Technol. 2024;38(5):738–769. doi: 10.1080/01694243.2023.2241642.
   Web of Science ®Google Scholar
• Cao F, Chen S, Du C. Investigation of hot-wire TIG welding based on the heat-conduction. Energy Proc. 2018;144:9–15. doi: 10.1016/j.egypro.2018.06.003.
   Google Scholar
• Yan J, Gao M, Zeng X. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding. Opt Laser Eng. 2010;48(4):512–517. doi: 10.1016/j.optlaseng.2009.08.009.
   Web of Science ®Google Scholar
• Ramkumar KD, Arivazhagan N, Narayanan S. Effect of filler materials on the performance of gas tungsten arc welded AISI 304 and Monel 400. Mater Design. 2012;40:70–79. doi: 10.1016/j.matdes.2012.03.024.
   Web of Science ®Google Scholar
• Liu D, Guo R, Yong U M, et al. Dissimilar metal joining of 304 stainless steel to SMA490BW steel using the filler metal powders with a high-entropy design. Met Mater Int. 2020;26(6):854–866. doi: 10.1007/s12540-019-00400-5.
   Web of Science ®Google Scholar
• Boriwal L, Sarviya RM, Mahapatra MM. Optimization of weld bonding process parameters of austenitic stainless steel 304L and low carbon steel sheet dissimilar joints. J Adhes Sci Technol. 2017;31(14):1591–1616. doi: 10.1080/01694243.2016.1266844.
   Web of Science ®Google Scholar
• Mahajan S, Chhibber R. Investigations on dissimilar welding of P91/SS304L using Nickel-based electrodes. Mater Manuf Process. 2020;35(9):1010–1023. doi: 10.1080/10426914.2020.1755041.
   Web of Science ®Google Scholar
• Unocic KA, Chen X, Tortorelli PF. Microstructural evaluation of welded nickel-based superalloy inconel 740H after creep testing. J Min Met Mat S. 2020;72(5):1811–1821. doi: 10.1007/s11837-020-04119-2.
   Web of Science ®Google Scholar
• Manikandan SGK, Sivakumar D, Rao KP, et al. Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone. J Mater Process Tech. 2014;214(2):358–364. doi: 10.1016/j.jmatprotec.2013.09.006.
   Web of Science ®Google Scholar
• Farkoosh AR, Pekguleryuz M. The effects of manganese on the Τ-phase and creep resistance in Al–Si–Cu–Mg–Ni alloys. Mater Sci Eng A. 2013;582:248–256. doi: 10.1016/j.msea.2013.06.030.
   Web of Science ®Google Scholar
• An Q, Fan KY, Ge YF, et al. Microstructure and mechanical properties of stainless steel clad plate joints produced by TIG and MAG hybrid welding. J Adhes Sci Technol. 2020;34(6):670–685. doi: 10.1080/01694243.2019.1677087.
   Web of Science ®Google Scholar
• Ferro P, Fabrizi A, Bonollo F, et al. Influence of short-term post welding heat treatments on corrosion resistance of UNS N06625 nickel-chromium-molybdenum alloy. Proc Eng. 2022;41:430–438. doi: 10.1016/j.prostr.2022.05.049.
   Google Scholar
• Adin MŞ. Machining aerospace aluminium alloy with cryo-treated and untreated HSS cutting tools. Adv Mater Process Technol. 2023;10(3):2664–2689. doi: 10.1080/2374068X.2023.2273035.
   Google Scholar
• Lee KH, Kim BJ, Yoon SH, et al. Durability improvement of co-cured carbon/epoxy composite-aluminum laminate with nano-size carbon black at cryogenic temperature. J Adhes Sci Technol. 2009;23(4):639–649. doi: 10.1163/156856108X379146.
   Web of Science ®Google Scholar
• Adin MŞ. A parametric study on the mechanical properties of MIG and TIG welded dissimilar steel joints. J Adhes Sci Technol. 2024;38(1):115–138. doi: 10.1080/01694243.2023.2221391.
   Web of Science ®Google Scholar
• Sathishkumar M, Manikandan M. Development of pulsed current arc welding to preclude carbide precipitates in hastelloy x weldment using ERNiCr-3. J Materi Eng Perform. 2020;29(8):5395–5408. doi: 10.1007/s11665-020-05010-6.
   Web of Science ®Google Scholar
• Chen C, Fan C, Cai X, et al. Arc characteristics and weld appearance in pulsed ultrasonic assisted GTAW process. Res Phys. 2019;15:102692. doi: 10.1016/j.rinp.2019.102692.
   Google Scholar
• Sun QJ, Lin SB, Yang CL, et al. Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas welding. Sci Technol Weld Joi. 2009;14(8):765–767. doi: 10.1179/136217109X12505932584772.
   Web of Science ®Google Scholar
• Lu S, Fujii H, Nogi K. Marangoni convection and weld shape variations in Ar–O2 and Ar–CO2 shielded GTA welding. Mater Sci Eng A. 2004;380(1-2):290–297. doi: 10.1016/j.msea.2004.05.057.
   Web of Science ®Google Scholar
• Kessal BA, Fares C, Meliani MH, et al. Effect of gas tungsten arc welding parameters on the corrosion resistance and the residual stress of heat affected zone. Eng Fail Anal. 2020;107:104200. doi: 10.1016/j.engfailanal.2019.104200.
   Web of Science ®Google Scholar
• Srikanth A, Manikandan M. Development of welding technique to avoid the sensitization in the alloy 600 by conventional Gas Tungsten Arc Welding method. J Manuf Process. 2017;30:452–466. doi: 10.1016/j.jmapro.2017.10.014.
   Web of Science ®Google Scholar
• Kou S, Yang YK. Fusion-boundary macrosegregation in dissimilar-filler welds. Weld J. 2007;86(10):303.
   Web of Science ®Google Scholar
• Soysal T, Kou S, Tat D, et al. Macrosegregation in dissimilar-metal fusion welding. Acta Mater. 2016;110:149–160. doi: 10.1016/j.actamat.2016.03.004.
   Web of Science ®Google Scholar
• Mohan Kumar S, Siva Shanmugam N. Effect of heat input and weld chemistry on mechanical and microstructural aspects of double side welded austenitic stainless steel 321 grade using tungsten inert gas arc welding process. Materialwissens Werkst. 2020;51(3):349–367. doi: 10.1002/mawe.201900063.
   Web of Science ®Google Scholar
• Sivakumar N, Sanjay Gandhi B, Senthil Kumar K, et al. Effect of constant current and pulsed current gas tungsten arc welding process on microstructure and mechanical properties of superalloy 59 joints. Mater Res Express. 2022;9(4):046525. doi: 10.1088/2053-1591/ac6793.
   Web of Science ®Google Scholar
• Villanueva DME, Junior FCP, Plaut RL, et al. Comparative study on sigma phase precipitation of three types of stainless steels: austenitic, superferritic and duplex. Mater Sci Technol. 2006;22(9):1098–1104. doi: 10.1179/174328406X109230.
   Web of Science ®Google Scholar
• Muthukumaran N, Arulmurugan B, Manikandan M. Analyzing microstructural, residual stress, and mechanical characteristics in dissimilar welds of Inconel 59 and AISI 904L through double-pulsed gas metal arc welding. Proc Inst Mech Eng L J Mater Des Appl. 2024;238(8):1467–1487. doi: 10.1177/14644207231225884.
   Google Scholar
• Zhao M, Chen J, Yu M, et al. Effect of transverse magnetic field on weld formation and microstructure & properties of high-speed hot-wire tungsten inert gas welding joints. Sci Technol Weld Joi. 2020;25(5):407–414. doi: 10.1080/13621718.2020.1730546.
   Web of Science ®Google Scholar
• Evangeline A, Sathiya P, Arivazhagan B. Laves phase formation and segregation of Nb in Ni–Cr–Mo superalloy over 316l by hot wire (HW) TIG cladding process. Arab J Sci Eng. 2020;45(11):9685–9698. doi: 10.1007/s13369-020-04873-0.
   Web of Science ®Google Scholar
• Banovic SW, DuPont JN, Marder AR. Dilution and microsegregation in dissimilar metal welds between super austenitic stainless steel and nickel base alloys. Sci Technol Weld Joi. 2002;7(6):374–383. doi: 10.1179/136217102225006804.
   Web of Science ®Google Scholar
• Bhanu V, Pandey C, Gupta A. Dissimilar joining of the martensitic grade P91 and Incoloy 800HT alloy for AUSC boiler application: microstructure, mechanical properties and residual stresses. CIRP J Manuf Sci Technol. 2022;38:560–580. doi: 10.1016/j.cirpj.2022.06.009.
   Web of Science ®Google Scholar
• Taban E. Joining of duplex stainless steel by plasma arc, TIG, and plasma Arc + TIG welding processes. Mater Manuf Process. 2008;23(8):871–878. doi: 10.1080/10426910802385075.
   Web of Science ®Google Scholar
• Rajasekhar K, Harendranath CS, Raman R, et al. Microstructural evolution during solidification of austenitic stainless steel weld metals: a color metallographic and electron microprobe analysis study. Mater Charact. 1997;38(2):53–65. doi: 10.1016/S1044-5803(97)80024-1.
   Web of Science ®Google Scholar
• Ma YW, Lee KW, Kong BO, et al. Evaluation of weld joint strength reduction factor due to creep in alloy 740H to P92 dissimilar metal weld joint. Met Mater Int. 2021;27(11):4408–4417. doi: 10.1007/s12540-021-00988-7.
   Web of Science ®Google Scholar
• Subramani P, Manikandan M. Development of welding technique to suppress the microsegregation in the aerospace grade alloy 80A by conventional current pulsing technique. J Manuf Process. 2018;34:579–592. doi: 10.1016/j.jmapro.2018.06.037.
   Web of Science ®Google Scholar
• Naffakh H, Shamanian M, Ashrafizadeh F. Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657. J Mater Process Tech. 2009;209(7):3628–3639. doi: 10.1016/j.jmatprotec.2008.08.019.
   Web of Science ®Google Scholar
• Ramkumar KD, Varma JLN, Chaitanya G, et al. Effect of autogenous GTA welding with and without flux addition on the microstructure and mechanical properties of AISI 904L joints. Mater Sci Eng A. 2015;636:1–9. doi: 10.1016/j.msea.2015.03.072.
   Web of Science ®Google Scholar
• Baldissera P, Delprete C. Effects of deep cryogenic treatment on static mechanical properties of 18NiCrMo5 carburized steel. Mater Design. 2009;30(5):1435–1440. doi: 10.1016/j.matdes.2008.08.015.
   Web of Science ®Google Scholar
• Ganesh KC, Vasudevan M, Balasubramanian KR, et al. Thermo-mechanical analysis of TIG welding of AISI 316LN stainless steel. Mater Manuf Process. 2014;29(8):903–909. doi: 10.1080/10426914.2013.872266.
   Web of Science ®Google Scholar
• Kumar R, Mohan Mahapatra M, Kumar Pradhan A, et al. Experimental and numerical study on the distribution of temperature field and residual stress in a multi-pass welded tube joint of Inconel 617 alloy. Int J Pres Ves Pip. 2023;206:105034. doi: 10.1016/j.ijpvp.2023.105034.
   Web of Science ®Google Scholar
• Xie Y, Zhuang J, Huang B, et al. Effect of different welding parameters on residual stress and deformation of 20/0Cr18Ni9 dissimilar metal arc-welding joint. J Adhes Sci Technol. 2020;34(15):1628–1652. doi: 10.1080/01694243.2020.1715670.
   Web of Science ®Google Scholar
• Pandey C, Mahapatra MM, Kumar P, et al. Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel. Eng Fail Anal. 2019;96:158–167. doi: 10.1016/j.engfailanal.2018.09.036.
   Web of Science ®Google Scholar
• Saju T, Velu M. Finite element and experimental analysis of residual stresses in electron beam welded nickel-based superalloys. TECM. 2021;30(2-3):255–274. doi: 10.13052/ejcm2642-2085.30235.
   Google Scholar
• Kumar B, Bag S, Mahadevan S, et al. On the interaction of microstructural morphology with residual stress in fiber laser welding of austenitic stainless steel. CIRP J Manuf Sci Technol. 2021;33:158–175. doi: 10.1016/j.cirpj.2021.03.009.
   Web of Science ®Google Scholar
• Arulmurugan B, Sathishkumar M, Balaji D, et al. Development of arc welding technique to preclude microsegregation in the dissimilar joint of Alloy C-2000 and C-276. P I Mech Eng E J Pro. 2021;235(5):1408–1419. doi: 10.1177/09544089211000011.
   Web of Science ®Google Scholar
• Kumar DS, Kumar SS. Influence of post weld cryogenic treatment on the ballistic penetration resistance of friction stir-welded AZ31B magnesium alloy. P I Mech Eng C J Mec. 2022;236(13):7304–7318. doi: 10.1177/0954406220954465.
   Web of Science ®Google Scholar
• Baldissera P, Delprete C. Deep cryogenic treatment: a bibliographic review. TOMEJ. 2008;2(1):1–11. doi: 10.2174/1874155X00802010001.
   Google Scholar
• Jovičević-Klug P, Podgornik B. Review on the effect of deep cryogenic treatment of metallic materials in automotive applications. Metals. 2020;10(4):434. doi: 10.3390/met10040434.
   Web of Science ®Google Scholar
• Arulmurugan B, Balaji D, Rajkumar S, et al. Influence of filler wire and welding process to mitigate the microsegregation of alloy C-2000 using continuous and pulsed current gas tungsten arc welding techniques. J Mat Eng Perform. 2021;30(8):6050–6067. doi: 10.1007/s11665-021-05810-4.
   Web of Science ®Google Scholar