References
- Asadi, N., and H. Zilouei. 2017. “Optimization of Organosolve Pre-Treatment of Rice Straw for Enhanced Biohydrogen Production Using Enterobacter Aerogenes.” Bioresource Technology 227:335–44.
- Barry, L.L. 2018. “Forty Years of Advances in Ozone Technology – A Review of Ozone: Science & Engineering.” Ozone: Science & Engineering 40 (1):3–20.
- Box, G. E. P., and K. B. Wilson. 1951. “On the Experimental Attainment of Optimum Conditions.” Journal of the Royal Statistical Society 13 (1):1–45.
- Brolin, A., J. Gierer, and Y. Zhang. 1993. “On the Selectivity of Ozone Delignification of Softwood Kraft Pulps.” Wood Science and Technology 27 (2):115–29. doi:10.1007/BF00206229.
- Brown, J., M.C. Cheek, H. Jameel, and T.W. Joyce. 1994. “Medium-Consistency Ozone Bleaching with Enzyme Pretreatment.” Tappi Journal 77 (11):105–09.
- Burnet, A., B. Brochier, and M. Petit-Conil. 2015. “Ozone in Sequence and at Different Places as an Interesting Bleaching Chemical for Eucalyptus Kraft Pulp.” 7th International Colloquium on Eucalyptus Pulp, May 26–29, Vitória, Espirito Santo, Brazil.
- Demchishina, M. 2011. “Soft ECF-bleaching of Softwood Pulps.” Master’s Thesis, Lulea University of Technology, Sweden.
- Deschatelets, L., and K. C. U. Errest. 1986. “A Simple Pentose Assay for Biomass Conversion Studies.” Applied Microbiology and Biotechnology 24 (5):379–85. doi:10.1007/BF00294594.
- Freeman, D. 2012. “Ozone Bleaching of Pulp.” Chapter 9. In The Bleaching of Pulp, edited by P. W. Hart and A. W. Rudie, 242–72. Peachtree Corners, GA: Tappi Press.
- Ghosh, U. K. 2006. “Short Sequence Environment Friendly Bleaching of Wheat Straw Pulp.” Journal of Scientific & Industrial Research 65:68–71.
- Hostachy, J.C. 2009. “Bagasse Pulp Bleaching with Ozone - It’s Time to Implement Green Bleaching Practices.” Paperex, 9th International Conference on Pulp & Paper Industry, December 4-7, 2009, Pragati Maidan, New Delhi, India.
- Hostachy, J. C. 2010. “Ozone Enhanced Bleaching of Softwood Kraft Pulp.” Tappi Journal 9 (8):16–23.
- Jablonsky, M. 2009. “Optimization of Ozone Bleaching Conditions of Oxygen Delignified Hardwood Kraft Pulp with D-Mannitol.” Wood Research 54 (2):73–82.
- Jablonsky, M., M. Vrska, S. Suty, and G. Szeiffova. 2005. “Ozone Bleaching of Kraft Pulp of Beech in the Presence of Peracetic Acid as Cellulose Protector.” Wood Research 50 (4):51–60.
- Jung, J. Y., J. K. Yang, and H. M. Park. 2016. “Optimization of Ethanol Extraction of Antioxidative Phenolic Compounds from Torrefied Oak Wood (Quercus Serrata) Using Response Surface Methodology.” Wood Science and Technology 50 (5):1037–55.
- Kishimato, T. 1996. “Studies on the Polysaccharide Reactions in Ozone Bleaching of Kraft Pulp.” Ph.D. Thesis, Hokkaido University, Sapporo, Japan
- Liebergott, N., B. Van Lierop, and A. Skothos. 1992. “A Survey of the Use of Ozone in Bleaching Pulps Part 1.” Tappi Journal 75 (1):145–52.
- Lindholm, C.A. 1988. “Effect of Pulp Consistency and pH in Ozone Bleaching Part 3 Bleaching of Oxygen-Delignified Kraft Pulp.” Nordic Pulp and Paper Research Journal 3 (1):44–50.
- Mishra, S. P., D. Lachenal, and C. Chirat. 2013. “The Effect of Introducing Ozone in Elemental Chlorine Free Bleaching of Eucalyptus Kraft Pulp.” Tappi Journal 12 (11):39–45.
- Pouyet, F., C. Chirat, and D. Lachenal. 2013. “On the Origin of Cellulose Depolymerization during Ozone Treatment of Hardwood Kraft Pulp.” BioResources 8 (4):5289–98.
- Ragnar, M., T. Eriksson, and T. Reitberger. 1999. “Radical Formation in Ozone Reactions with Lignin and Carbohydrate Model Compounds.” Holzforschung 53 (3):292–98. doi:10.1515/HF.1999.049.
- Rakness, K., G. Gordon, B. Langlais, W. Masschelein, N. Matsumoto, Y. Richard, C. M. Robson, and I. Somiya. 1996. “Guideline for Measurement of Ozone Concentration in the Process Gas from an Ozone Generator.” Ozone: Science & Engineering 18:209–29.
- Roncero, M. B., M. A. Queral, J. F. Colom, and T. Vidal. 2010. “Why Acid pH Increases the Selectivity of the Ozone Bleaching Processes.” Ozone: Science & Engineering 25 (6):523–34.
- Roncero, M. B., A. L. Torres, J. F Colom, and T. Vidal. 2003a. “TCF Bleaching of Wheat Straw Pulp Using Ozone and Xylanase, Part A: Paper Quality Assessment.” Bioresource Technology 87 (3):305–14.
- Roncero, M. B., A. L. Torres, J. F Colom, and T. Vidal. 2003b. “TCF Bleaching of Wheat Straw Pulp Using Ozone and Xylanase Part B: Kinetic Studies.” Bioresource Technology 87 (3):315–23.
- Shatalov, A.A., and H. Pereira. 2007. “Polysaccharide Degradation during Ozone Based TCF Bleaching of Non-Wood Organosolv Pulps.” Carbohydrate Polymers 67 (3):275–81.
- Sreeram, C., V. S. M. Sundaram, H. Jameel, and H. Chang. 1994. “Laboratory Scale Medium Consistency Ozone Bleaching System.” Tappi Journal 77 (10):161–68.
- Tan, C. H., H. M. Ghazali, A. Kuntom, C. P. Tan, and A. A. Ariffin. 2009. “Extraction and Physicochemical Properties of Low Free Fatty Acid Crude Palm Oil.” Food Chemistry 113 (2):645–50. doi:10.1016/j.foodchem.2008.07.052.
- Tasman, J. E., and V. Berzins. 1957. “The Permanganate Consumption of Pulp Materials.” Tappi Journal 40 (9):691–704.
- Torres, A. L., M. B. Roncero, J. F. Colom, J. A. Martínez, and T. Vidal. 2004. “Application of an Experimental Design to Modeling of Ozone Bleaching Stage in TCF Processes.” Ozone: Science and Engineering 26:443–51.
- Tripathi, S., N. K. Bhardwaj, and H. R. Ghatak. 2018. “Determination of Main Parameters Affecting the Ozone Bleaching of Wheat Straw Pulp Using Plackett–Burman Design.” Ozone: Science & Engineering 40 (2):148–56.
- Updegraff, D.M. 1969. “Semimicro Determination of Cellulose in Biological Materials.” Analytical Biochemistry 32 (3):420–24.
- Wanrosli, W. D., Z. Zainuddin, and L. K. Lee. 2004. “Influence of Pulping Variables on the Properties of Elaeis Guineensis Soda Pulp as Evaluated by Response Surface Methodology.” Wood Science and Technology 38 (3):191–205.
- Wennerstrom, M. 2005. “Decreasing Brightness Reversion with Powerful Ozone Bleaching.” Pulp & Paper Canada 106 (1):41–46.
- Wennerstrom, M., S. Norden, and N. K. Jain. 2011. “The Eco-Friendly Bleaching Concept with HC Ozone.” Ippta Journal 23 (1):93–98.
- Xing, C., S. Y. Zhang, J. Deng, and S. Wang. 2007. “Investigation of the Effects of Bark fiber as Core Material and Its Resin Content on Three-Layer MDF Performance by Response Surface Methodology.” Wood Science and Technology 41 (7):585–95.