Preparation and characterization of ZnFe_1.2Cr_0.8O₄ water-based ceramic inks obtained using a polymeric dispersant

References

• Güngör, G. L.; Kara, A.; Blosi, M.; Gardini, D.; Guarini, G.; Zanelli, C.; Dondi, M. Micronizing Ceramic Pigments for Inkjet Printing: Part I. Grindability and Particle Size Distribution. Ceram. Int. 2015, 41, 6498–6506. DOI: 10.1016/j.ceramint.2015.01.093.
   Web of Science ®Google Scholar
• Zhou, J.; Guo, D.; Zhang, Y.; Rao, P. Preparation of Submicron-Sized ZnFe2-xCrxO4 (x = 0.4, 0.8) via a Two-Step Method and Evaluation of the Corresponding Ceramic Inks. Mater. Chem. Phys. 2021, 265, 124515–124524. DOI: 10.1016/j.matchemphys.2021.124515.
   Web of Science ®Google Scholar
• Pan, Z.; Wang, Y.; Huang, H.; Ling, Z.; Dai, Y.; Ke, S. Recent Development on Preparation of Ceramic Inks in Ink-Jet Printing. Ceram. Int. 2015, 41, 12515–12528. DOI: 10.1016/j.ceramint.2015.06.124.
   Web of Science ®Google Scholar
• Singh, M.; Haverinen, H. M.; Dhagat, P.; Jabbour, G. E. Inkjet Printing-Process and Its Applications. Adv. Mater. 2010, 22, 673–685. DOI: 10.1002/adma.200901141.
   PubMed Web of Science ®Google Scholar
• Bilgili, E.; Hamey, R.; Scarlett, B. Production of Pigment Nanoparticles Using a Wet Stirred Mill with Polymeric Media. China Part 2004, 2, 93–100. DOI 10.1016/S1672-2515(07)60032-3.
   Google Scholar
• Liu, H.; Dai, W.; Wang, H.; Zeng, L.; Wang, Y. Study on the Preparation of the CdSxSe1-x@ZrSiO4 Red Ceramic Pigments and Its Properties. J. Sol-Gel Sci. Technol. 2015, 75, 198–205. DOI: 10.1007/s10971-015-3689-1.
   Web of Science ®Google Scholar
• Shankar, P.; Teo, J.; Leong, Y. K.; Fourie, A.; Fahey, M. Adsorbed Phosphate Additives for Interrogating the Nature of Interparticles Forces in Kaolin Clay Slurries via Rheological Yield Stress. Adv. Powder Technol. 2010, 21, 380–385. DOI: 10.1016/j.apt.2010.02.013.
   Web of Science ®Google Scholar
• Tsai, H. Y.; Chang, S. J.; Yang, T. Y.; Li, C. C. Distinct Dispersion Stability of Various TiO2 Nanopowders Using Ammonium Polyacrylate as Dispersant. Ceram. Int. 2018, 44, 5131–5138. DOI: 10.1016/j.ceramint.2017.12.115.
   Web of Science ®Google Scholar
• Greenwood, R.; Rowson, N.; Kingman, S.; Brown, G. A New Method for Determining the Optimum Dispersant Concentration in Aqueous Grinding. Powder Technol. 2002, 123, 199–207. DOI: 10.1016/S0032-5910(01)00457-0.
   Web of Science ®Google Scholar
• Choi, H.; Lee, W.; Kim, S. Effect of Grinding Aids on the Kinetics of Fine Grinding Energy Consumed of Calcite Powders by a Stirred Ball Mill. Adv. Powder Technol. 2009, 20, 350–354. DOI: 10.1016/j.apt.2009.01.002.
   Web of Science ®Google Scholar
• Liu, Y.; Huang, G.; Pan, Z.; Wang, Y.; Li, G. Synthesis of Sodium Polyacrylate Copolymers as Water-Based Dispersants for Wet Ultrafine Grinding of Cobalt Aluminate Particles. Colloid Surf., A 2021, 610, 125553–125561. DOI: 10.1016/j.colsurfa.2020.125553.
   Google Scholar
• Huang, G.; Pan, Z.; Wang, Y. Preparation and Characterization of Waterborne Ceramic Ink with Submicron-Sized Praseodymium-Doped Zirconium Silicate Pigment by Water-Based Diblock Polymer Dispersants. Ceram. Int. 2020, 46, 21910–21919. DOI: 10.1016/j.ceramint.2020.04.073.
   Web of Science ®Google Scholar
• Huang, G.; Pan, Z.; Wang, Y. Dispersion of Praseodymium-Doped Zirconium Silicate Pigment in Aqueous Suspension by Modified Hydroxyl Copolymer. Chem. Eng. Res. Des. 2020, 154, 86–100. DOI: 10.1016/j.cherd.2019.11.037.
   Web of Science ®Google Scholar
• Gardini, D.; Blosi, M.; Zanelli, C.; Dondi, M. Ceramic Ink-Jet Printing for Digital Decoration: physical Constraints for Ink Design. J. Nanosci. Nanotechnol. 2015, 15, 3552–3561. DOI: 10.1166/jnn.2015.9857.
   PubMed Web of Science ®Google Scholar
• Güngor, G. L.; Kara, A.; Gardini, D.; Blosi, M.; Dondi, M.; Zanelli, C. Ink-Jet Printability of Aqueous Ceramic Inks for Digital Decoration of Ceramic Tiles. Dyes Pigm. 2016, 127, 148–154. DOI: 10.1016/j.dyepig.2015.12.018.
   Web of Science ®Google Scholar
• Ratcliffe, L. P. D.; Ryan, A. J.; Armes, S. P. From a Water-Immiscible Monomer to Block Copolymer Nano Objects via a One-Pot RAFT Aqueous Dispersion Polymerization Formulation. Macromolecules 2013, 46, 769–777. DOI: 10.1021/ma301909w.
   Web of Science ®Google Scholar
• Lakhwani, S.; Rahaman, M. N. Adsorption of Polyvinylpyrrolidone (PVP) and Its Effect on the Consolidation of Suspensions of Nano-Crystalline CeO2 Particles. J. Mater. Sci. 1999, 34, 3909–3912. DOI: 10.1023/A:1004678908275.
   Web of Science ®Google Scholar
• Zhang, Y.; Tang, M.; Jin, X.; Liao, C.; Yan, C. Polymeric Adsorption Behavior of Nanoparticulate Yttria Stabilized Zirconia and the Deposition of as-Formed Suspensions on Dense α-Al2O3 Substrates. Solid State Sci. 2003, 5, 435–440. DOI: 10.1016/S1293-2558(03)00043-8.
   Web of Science ®Google Scholar
• Tseng, W. J.; Teng, K. H. The Effect of Surfactant Adsorption on Sedimentation Behaviors of Al2O3-Toluene Suspensions. Mater. Sci. Eng., A 2001, 318, 102–110. DOI: 10.1016/S0921-5093(01)01331-4.
   Web of Science ®Google Scholar
• Faddoul, R.; Reverdy-Bruas, N.; Blayo, A. Formulation and Screen Printing of Water Based Conductive Flake Silver Pastes onto Green Ceramic Tapes for Electronic Applications. Mater. Sci. Eng., B 2012, 177, 1053–1066. DOI: 10.1016/j.mseb.2012.05.015.
   Web of Science ®Google Scholar
• Lutterotti, L. Maud: A Rietveld Analysis Program Designed for the Internet and Experiment Integration. Acta Crystallogr. 2000, 56, 54–56. DOI: 10.1107/S0108767300021954.
   Google Scholar
• Marco, P.; Llorens, J. Understanding of Naphthalene Sulfonate Formaldehyde Condensates as a Dispersing Agent to Stabilise Raw Porcelain Gres Suspensions Surface Adsorption and Rheological Behavior. Colloid Surf., A 2007, 299, 180–185. DOI: 10.1016/j.colsurfa.2006.11.034.
   Google Scholar
• Ran, Q.; Somasundaran, P.; Miao, C.; Liu, J.; Wu, S.; Shen, J. Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface. J. Dispersion Sci. Technol. 2010, 31, 790–798. DOI: 10.1080/01932690903333580.
   Web of Science ®Google Scholar
• Li, C. C.; Chang, S. J.; Wu, C. W.; Chang, C. W.; Yu, R. H. Newly Designed Diblock Dispersant for Powder Stabilization in Water-Based Suspensions. J. Colloid Interface Sci. 2017, 506, 180–187. DOI: 10.1016/j.jcis.2017.07.045.
   PubMed Web of Science ®Google Scholar
• Khanna, R. K.; Moore, M. H. Carbamic Acid: molecular Structure and IR Spectra. Spectrochim. Acta, Part A 1999, 55, 961–967. DOI: 10.1016/S1386-1425(98)00228-5.
   Web of Science ®Google Scholar
• Huang, G.; Pan, Z.; Wang, Y. Synthesis of Sodium Polyacrylate Copolymers as Water-Based Dispersants for Ultrafine Grinding of Praseodymium Zirconium Silicate. Colloid Surf., A 2018, 558, 591–599. DOI: 10.1016/j.colsurfa.2018.08.027.
   Google Scholar
• Nakamoto, K. Infrared and Raman Spectra of Inorganic and Coordination Compounds. Part A: theory and Applications in Inorganic Chemistry; John Wiley & Sons, Inc.: New Jersey, USA, 2009; pp 16394–16395
   Google Scholar
• Olhero, S. M.; Garcia-Gancedo, L.; Button, T. W.; Alves, F. J.; Ferreira, J. M. F. Innovative Fabrication of PZT Pillar Arrays by a Colloidal Approach. J. Eur. Ceram. Soc. 2012, 32, 1067–1075. DOI: 10.1016/j.jeurceramsoc.2011.11.016.
   Web of Science ®Google Scholar
• Lejeune, M.; Chartier, T.; Dossou-Yovo, C.; Noguera, R. Ink-Jet Printing of Ceramic Micro-Pillar Arrays. J. Eur. Ceram. Soc. 2009, 29, 905–911. DOI: 10.1016/j.jeurceramsoc.2008.07.040.
   Web of Science ®Google Scholar
• Bakarič, T.; Malič, B.; Kuscer, D. Lead Zirconate Titanate Based Thick Film Structures Prepared by Piezoelectric Inkjet Printing of Aqueous Suspensions. J. Eur. Ceram. Soc. 2016, 36, 4031–4037. DOI: 10.1016/j.jeurceramsoc.2016.06.038.
   Web of Science ®Google Scholar
• Parvez, K.; Worsley, R.; Alieva, A.; Felten, A.; Casiraghi, C. Water-Based and Inkjet Printable Inks Made by Electrochemically Exfoliated Grapheme. Carbon 2019, 149, 213–221. DOI: 10.1016/j.carbon.2019.04.047.
   Web of Science ®Google Scholar
• Prasad, P. S. R. K.; Reddy, A. V.; Rajesh, P. K.; Ponnambalam, P.; Prakasan, K. Studies on Rheology of Ceramic Inks and Spread of Ink Droplets for Direct Ceramic Ink Jet Printing. J. Mater. Process. Technol. 2006, 176, 222–229. DOI: 10.1016/j.jmatprotec.2006.04.001.
   Web of Science ®Google Scholar
• Liu, Y. F.; Tsai, M. H.; Pai, Y. F.; Hwang, W. S. Control of Droplet Formation by Operating Waveform for Inks with Various Viscosities in Piezoelectric Inkjet Printing. Appl. Phys. A. 2013, 111, 509–516. DOI: 10.1007/s00339-013-7569-7.
   Web of Science ®Google Scholar
• Nallan, H. C.; Sadie, J. A.; Kitsomboonloha, R.; Volkman, S. K.; Subramanian, V. Systematic Design of Jettable nanoparticle-based inkjet inks: rheology, acoustics, and jettability . Langmuir 2014, 30, 13470–13477. DOI: 10.1021/la502903y.
   PubMed Web of Science ®Google Scholar
• Dondi, M.; Blosi, M.; Gardini, D.; Chiara, Z. Ceramic Pigments for Digital Decoration Inks: An Overview. CFI-Ceram Forum Int. 2012, 89, 59–64. DOI: 10.1016/j.jnoncrysol.2012.06.001.
   Google Scholar
• Dollen, P. V.; Barnett, S. A Study of Screen Printed Yttria-Stabilized Zirconia Layers for Solid Oxide Fuel Cells. J. American Ceramic Society 2005, 88, 3361–3368. DOI: 10.1111/j.1551-2916.2005.00625.x.
   Web of Science ®Google Scholar