References
- Abrunhosa, A., Pereira, T., Márquez, B., Baquedano, E., Arsuaga, J. L., & Pérez-González, A. (2019). Understanding neanderthal technological adaptation at Navalmaíllo rock shelter (Spain) by measuring lithic raw materials performance variability. Archaeological and Anthropological Sciences, 11(11), 5949–5962. https://doi.org/https://doi.org/10.1007/s12520-019-00826-3
- Barber, R. J. (Ed.). (1981). Quartz technology in prehistoric New England. Institute for Conservation Archaeology, Peabody Museum, Harvard University.
- Bisson, M. S. (1990). Lithic reduction sequences as an aid to the analysis of late stone age quartz assemblages from the Luano Spring, Chingola, Zambia. The African Archaeological Review, 8(1), 103–138. https://doi.org/https://doi.org/10.1007/BF01116873
- Bons, P. D. (2001). The formation of large quartz veins by rapid ascent of fluids in mobile hydrofractures. Tectonophysics, 336(1–4), 1–17. https://doi.org/https://doi.org/10.1016/S0040-1951(01)00090-7
- Callahan, E. (1987). An evaluation of the Lithic Technology in middle Sweden during the mesolithic and neolithic. AUN 8. Societas Archaeologica Uppsaliensis.
- Callahan, E., Forsberg, L., Knutsson, K., & Lindgren, C. (1992). Frakturbilder. Kulturhistoriska Kommentarer Till Det Saregna Sonderfallet Vid Bearbetning Av Kvarts. Tor, 24, 27–63.
- Caruana, M. V., & Mtshali, S. P. (2018). Assessing the durability of Oldowan stone tools in South Africa: Implications for quartz selectivity and use. Lithic Technology, 43(4), 245–254. https://doi.org/https://doi.org/10.1080/01977261.2018.1516721
- Cornelissen, E. (2003). On microlithic quartz industries at the end of the Pleistocene in Central Africa: The evidence from Shum Laka (NW Cameroon). African Archaeological Review, 20(1), 1–24. https://doi.org/https://doi.org/10.1023/A:1022830321377
- Cotterell, B., & Kamminga, J. (1987). The formation of flakes. American Antiquity, 52(4), 675–708. https://doi.org/https://doi.org/10.2307/281378
- Cotterell, B., & Kamminga, J. (1990). Mechanics of pre-industrial technology: An introduction to the mechanics of ancient and traditional material culture. Cambridge University Press.
- Deal, K. 2012. Fire effects on flaked stone, ground stone, and other stone artifacts. In K. C. Ryan, A. T. Jones, C. L. Koerner and K. M. Lee (Eds.), Wildland fire in ecosystems: Effects of fire on cultural resources and archaeology. USDA Forest Service General Technical Report RMRS-GTR-42-vol. 3 (pp. 97–111). Department of Agriculture, Forest Service, Rocky Mountain Research Station.
- de la Peña, P. (2015). A qualitative guide to recognize bipolar knapping for flint and quartz. Lithic Technology, 40(4), 316–331. https://doi.org/https://doi.org/10.1080/01977261.2015.1123947
- de Lombera Hermida, A. 2009 The scar identification of lithic quartz industries. In F. Sternke, L. Eigeland and L.-J. Costa (Eds.), Non-flint raw material Use in prehistory: Old prejudices and new directions, British Archaeological Reports International Series no. 1939 (pp. 5–11). Archaeopress.
- de Lombera-Hermida, A., & Rodríguez-Rellán, C. (2016). Quartzes matter: Understanding the technological and behavioural complexity in quartz lithic assemblages. Quaternary International, 424, 2–11. https://doi.org/https://doi.org/10.1016/j.quaint.2016.11.039
- Despriée, J., Moncel, M. H., Arzarello, M., Courcimault, G., Voinchet, P., Bahain, J. J., & Falguères, C. (2018). The 1-million-year-old quartz assemblage from Pont-de-Lavaud (Centre, France) in the European context. Journal of Quaternary Science, 33(6), 639–661. https://doi.org/https://doi.org/10.1002/jqs.3042
- Dickson, F. P. (1977). Quartz flaking. In R. V. S. Wright (Ed.), Stone tools as cultural markers: Change, evolution and complexity (pp. 97–103). Australian Institute of Aboriginal Studies; Humanities Press.
- Diez-Martín, F., Yustos, P. S., Domínguez-Rodrigo, M., & Prendergast, M. E. (2011). An experimental study of bipolar and freehand knapping of Naibor Soit quartz from Olduvai Gorge (Tanzania). American Antiquity, 76(4), 690–708. https://doi.org/https://doi.org/10.7183/0002-7316.76.4.690
- Domanski, M., Webb, J. A., & Boland, J. (1994). Mechanical properties of stone artefact materials and the effect of heat treatment. Archaeometry, 36(2), 177–208. https://doi.org/https://doi.org/10.1111/j.1475-4754.1994.tb00963.x
- Driscoll, K. (2010). Understanding quartz technology in early prehistoric Ireland [Unpublished PhD thesis]. School of Archaeology, University College Dublin, Dublin.
- Driscoll, K. (2011a). Identifying and classifying vein quartz artefacts: An experiment conducted at the World Archaeology Congress, 2008. Archaeometry, 53(6), 1280–1296. https://doi.org/https://doi.org/10.1111/j.1475-4754.2011.00600.x
- Driscoll, K. (2011b). Vein quartz in lithic traditions: An analysis based on experimental archaeology. Journal of Archaeological Science, 38(3), 734–745. https://doi.org/https://doi.org/10.1016/j.jas.2010.10.027
- Driscoll, K., Alcaina, J., Égüez, N., Mangado, X., Fullola, J.-M., & Tejero, J.-M. (2016). Trampled under foot: A quartz and chert human trampling experiment at the Cova del Parco rock shelter, Spain. Quaternary International, 424, 130–142. https://doi.org/https://doi.org/10.1016/j.quaint.2015.04.054
- Driscoll, K., & Menuge, J. (2011). Recognising burnt vein quartz artefacts in archaeological assemblages. Journal of Archaeological Science, 38(9), 2251–2260. https://doi.org/https://doi.org/10.1016/j.jas.2011.03.028
- Driscoll, K., & Warren, G. M. (2007). Dealing with the ‘quartz problem’ in Irish lithic research. Lithics–The Journal of the Lithic Studies Society, 28, 4–14.
- Fanning, P., & Holdaway, S. (2001). Stone artifact scatters in western NSW, Australia: Geomorphic controls on artifact size and distribution. Geoarchaeology: An International Journal, 16(6), 667–686. https://doi.org/https://doi.org/10.1002/gea.1015
- Flenniken, J. F. (1981). Replicative systems analysis: A model applied to the vein quartz artifacts from the hoko river site. Washington State University Laboratory of Anthropology Reports of Investigations No. 59, Washington State University.
- Hartley, N. E. W., & Wilshaw, T. R. (1973). Deformation and fracture of synthetic α-quartz. Journal of Materials Science, 8(2), 265–278. https://doi.org/https://doi.org/10.1007/BF00550676
- Hawkins, R., & Mosig, W. A. (2020). Rethinking the desirability of quartz for the manufacture of standardized retouched flakes: An example from Weereewaa (Lake George), south-eastern Australia. Lithic Technology, 45(3), 197–212. https://doi.org/https://doi.org/10.1080/01977261.2020.1768687
- Holdaway, S., & Stern, N. (2004). A record in stone: The study of Australia’s flaked stone artefacts. Aboriginal Studies Press.
- Knight, J. (1991a). Technological analysis of the anvil (bipolar) technique. Lithics–The Journal of the Lithic Studies Society, 12, 37–56.
- Knight, J. (1991b). Vein quartz. Lithics–The Journal of the Lithic Studies Society, 12, 57–97.
- Knutsson, K. (1988). Making and using stone tools: The analysis of the lithic assemblages from middle neolithic sites with flint in Västerbotten, Northern Sweden. Societas Archaeologica Uppsaliensis.
- Knutsson, K. (2014). ‘Simple’ need not mean ‘archaic’. Antiquity, 88(341), 950–953. https://doi.org/https://doi.org/10.1017/S0003598X00050894
- Moore, M. W. (2000). Lithic technology in Tasmania. Archaeology in Oceania, 35(2), 57–73. https://doi.org/https://doi.org/10.1002/j.1834-4453.2000.tb00456.x
- Mourre, V. (1996). Les industries en Quartz au Paleolithique. Terminologie, Methodologie et Technologie. Paleo, 8(1), 205–223. https://doi.org/https://doi.org/10.3406/pal.1996.1160
- Pargeter, J., & de la Peña, P. (2017). Milky quartz bipolar reduction and lithic miniaturization: Experimental results and archaeological implications. Journal of Field Archaeology, 42(6), 551–565. https://doi.org/https://doi.org/10.1080/00934690.2017.1391649
- Pargeter, J., de la Peña, P., & Eren, M. I. (2019). Assessing raw material’s role in bipolar and freehand miniaturized flake shape, technological structure, and fragmentation rates. Archaeological and Anthropological Sciences, 11(11), 5893–5907. https://doi.org/https://doi.org/10.1007/s12520-018-0647-1
- Pargeter, J., & Eren, M. I. (2017). Quantifying and comparing bipolar versus freehand flake morphologies, production currencies, and reduction energetics during lithic miniaturization. Lithic Technology, 42(2–3), 90–108. https://doi.org/https://doi.org/10.1080/01977261.2017.1345442
- Rankama, T., Manninen, M. A., Hertell, E., & Tallavaara, M. (2006) Simple production strategies: Do they meet? Social dimensions in eastern fennoscandian quartz technologies. In J. Apel & K. Knutsson (Eds.), Skilled production and Social reproduction (pp. 245–262). Societas Archaeologica Uppsaliensis Stone Studies 2. Societas Archaeologica Uppsaliensis.
- Sandquist, S. (2013). The properties of quartz: Symbolical and functional aspects of the quartz-sites on Mesolithic Södertörn. Unpublished Master thesis, Department of Archaeology and Ancient Studies, Stockholm University, Stockholm.
- Schick, K. D. (1986). Stone age sites in the making: Experiments in the formation and transformation of archaeological occurrences. British Archaeological Reports International Series 314. Archaeopress.
- Schick, K. D. (1987). Experimentally-derived criteria for assessing hydrologic disturbance of archaeological sites. In D. T. Nash & M. D. Petraglia (Eds.), Natural formation processes and the archaeological record, British Archaeological Reports International Series 352 (pp. 86–107). Archaeopress.
- Spry, C., Foley, E., Kurpiel, R., & Turnbull, J. (2019). Identifying quartz artefacts in archaeology and cultural heritage management: Issues, approaches and a new open-access project. In C. Spry, D. Frankel, S. Lawrence, E. Foley, I. Berelov, & S. Canning (Eds.), Excavations, surveys and heritage management in Victoria (Vol. 8, pp. 77–83). La Trobe University.
- Spry, C., Foley, E., Kurpiel, R., Turnbull, J., & Penzo-Kajewski, P. (2020). Quartz archaeology project. Open Science Framework. Retrieved July 22, 2020, from https://doi.org/http://doi.org/10.17605/OSF.IO/N8CWR.
- Spry, C., Kurpiel, R., Foley, E., Turnbull, J., & Penzo-Kajewski, P. (2021). Disentangling activity traces on Australian goldfields: An experimental study of quartz assemblages derived from knapping and gold prospecting. Australian Archaeology, 87(1), 49–62. https://doi.org/https://doi.org/10.1080/03122417.2021.1885109
- Sullivan, K. (1973). The archaeology of Mangat and some of the problems of analysing a quartz industry. [Unpublished BA (Hons) thesis]. University of Sydney, Sydney.
- Tallavaara, M., Manninen, M. A., Hertell, E., & Rankama, T. (2010). How flakes shatter: A critical evaluation of quartz fracture analysis. Journal of Archaeological Science, 37(10), 2442–2448. https://doi.org/https://doi.org/10.1016/j.jas.2010.05.005
- Venditti, F., Tirillò, J., & Garcea, E. A. (2016). Identification and evaluation of post-depositional mechanical traces on quartz assemblages: An experimental investigation. Quaternary International, 424, 143–153. https://doi.org/https://doi.org/10.1016/j.quaint.2015.07.046
- Witter, D. (1990). Regions and resources [Unpublished PhD thesis]. Australian National University, Canberra.