Integration of input shaping technique with interpolation for vibration suppression of servo-feed drive system

References

• Chen, C. S., and A. C. Lee. 1998. “Design of Acceleration/Deceleration Profiles in Motion Control Based on Digital FIR Filters.” International Journal of Machine Tools and Manufacture 38 (7): 799–825. doi:10.1016/S0890-6955(97)00065-5.
   Web of Science ®Google Scholar
• Colombi, S., and T. Raimondi. 1994. “Compliance Compensation in Mechtronic Systems.” In Proceeding of 20th International Conference on Industrial Electronics, Control, and Instrumentation, Bologna, Italy, 5–9 September 1994: 946–951. New York: IEEE.
   Google Scholar
• Duong, Q. K., P. Hubinsky, P. Paszto, M. Florek, J. Sovcik, and M. Kajan. 2014. “Effectiveness of Input Shaping and Real-time Nurbs Interpolation for Reducing Feedrate Fluctuation.” Procedia Engineering 96: 81–90. doi:10.1016/j.proeng.2014.12.101.
   Google Scholar
• Fu, S. C., and S. Cheng. 2009. “Analysis and Suppression of Torsional Vibrations for the Permanent Magnet Synchronous Motor-Load System.” In Proceeding of IEEE International Conference on Systems, Man and Cybernetics, San Antonio, TX, 11–14 October 2009: 3359–3364. New York: IEEE.
   Google Scholar
• Hori, Y., H. Iseki, and K. Sugiura. 1994. “Basic Consideration of Vibration Suppression and Disturbance Rejection Control of Multi-inertia System Using Sflac(State Feedback and Load Acceleration Control).” IEEE Transactions on Industrial Application 30 (4): 889–896. doi:10.1109/28.297904.
   Web of Science ®Google Scholar
• Lee, K., S. Ibaraki, A. Matsubara, Y. Kakino, Y. Suzuki, S. Arai, and J. Braasch. 2003. “A Servo Parameter Tuning Method for High-speed NC Machine Tools Based on Contouring Error Measurement.” WIT Transactions on Engineering Sciences 44: 181–192. doi:10.2495/LAMDAMAP030171.
   Google Scholar
• Murphy, B. R., and I. Watanabe. 1992. “Digital Shaping Filters for Reducing Machine Vibration.” IEEE Transactions on Robotics and Automation 8 (2): 285–289. doi:10.1109/70.134281.
   Google Scholar
• Pao, L., and W. Singhose. 1996. “Unity Magnitude Input Shapers and Their Relation to Time-optimal Control.” In International Federation of Automatic Control World Congress, San Francisco, CA, 30 June–5July 1996: 385–390. New York: IFAC.
   Google Scholar
• Park, U. H., J. W. Lee, B. D. Lim, and Y. G. SUNG. 2001. “Design and Sensitivity Analysis of an Input Shaping Filter in the Z-Plane.” Journal of Sound and Vibration 243 (1): 157–171. doi:10.1006/jsvi.2000.3414.
   Web of Science ®Google Scholar
• Pelaez, G., Gu Pelaez, J. M. Perez, A. Vizan, and E. Bautista. 2005. “Input Shaping Reference Commands for Trajectory Following Cartesian Machines.” Control Engineering Practice 13 (8): 941–958. doi:10.1016/j.conengprac.2004.09.011.
   Web of Science ®Google Scholar
• Schmitz, T. L., and K. S. Smith. 2008. Machining Dynamics: Frequency Response to Improved Productivity. New York: Springer Science & Business Media.
   Google Scholar
• Sencer, B., K. Ishizaki, and E. Shamoto. 2015. “High Speed Cornering Strategy with Confined Contour Error and Vibration Suppression for CNC Machine Tools.” CIRP Annals-Manufacturing Technology 64 (1): 369–372. doi:10.1016/j.cirp.2015.04.102.
   Web of Science ®Google Scholar
• Shan, J., H. T. Liu, and D. Sun. 2005. “Modified Input Shaping for a Rotating Single-link Flexible Manipulator.” Journal of Sound and Vibration 285 (1): 187–207. doi:10.1016/j.jsv.2004.08.035.
   Web of Science ®Google Scholar
• Singer, N. C., and W. P. Seering. 1990. “Preshaping Command Inputs to Reduce System Vibration.” Journal of Dynamic Systems, Measurement and Control 112 (1): 76–82. doi:10.1115/1.2894142.
   Web of Science ®Google Scholar
• Singer, N., W. Singhose, and W. Seering. 1999. “Comparison of Filtering Methods for Reducing Residual Vibration.” European Journal of Control 5 (2): 208–218. doi:10.1016/S0947-3580(99)70155-X.
   Web of Science ®Google Scholar
• Singhose, W. E., and N. C. Singer. 1996. “Effects of Input Shaping on Two-dimensional Trajectory following.” IEEE Transactions on Robotics and Automation 12 (6): 881–887. doi:10.1109/70.544771.
   Google Scholar
• Singhose, W., W. Seering, and N. Singer. 1994. “Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs.” Journal of Mechanical Design 116 (2): 654–659. doi:10.1115/1.2919428.
   Web of Science ®Google Scholar
• Singhose, W. E., W. P. Seering, and N. C. Singer. 1996. “Input Shaping for Vibration Reduction with Specified Insensitivity to Modeling Errors.” In Proceedings of Japan–USA Symposium on Flexible Automation, Boston, MA, 7–10 July 1996: 307–313. New York: ASME.
   Google Scholar
• Smith, O. J. M. 1958. Feedback Control Systems. New York: McGraw-Hill.
   Google Scholar
• Sugiura, K., and Y. Hori. 1994. “Proposal of Quad-pole Controller Based on Root-5 Resonance Ratio Control for 2-Mass System.” In Proceeding of IEEE 3rd AMC Workshop, Berkeley, USA, 20–23 March 1994: 409–416. New York: IEEE.
   Google Scholar
• Tsai, M. S., and Y. C. Huang. 2016. “A Novel Integrated Dynamic Acceleration/Deceleration Interpolation Algorithm for a CNC Controller.” The International Journal of Advanced Manufacturing Technology 87 (1): 279–292. doi:10.1007/s00170-016-8444-4.
   Web of Science ®Google Scholar
• Tsai, M. S., M. T. Lin, and H. T. Yau. 2006. “Development of Command-based Iterative Learning Control Algorithm with Consideration of Friction, Disturbance, and Noise Effects.” IEEE Transactions on Control Systems Technology 14 (3): 511–518. doi:10.1109/TCST.2005.860521.
   Web of Science ®Google Scholar
• Tsai, M. S., H. W. Nien, and H. T. Yau. 2011. “Development of Integrated Acceleration/Deceleration Look-ahead Interpolation Technique for Multi-blocks NUBRS Curves.” The International Journal of Advanced Manufacturing Technology 56 (5): 601–618. doi:10.1007/s00170-011-3214-9.
   Web of Science ®Google Scholar
• Tuttle, T. D., and W. P. Seering. 1994. “A Zero-placement Technique for Designing Shaped Inputs to Suppress Multiple-mode Vibration.” In Proceedings of the American Control Conference, Baltimore, MD, 29 June–1 July 1994: 2533–2537. New York: IEEE.
   Google Scholar
• Vaughan, J., A. Yano, and W. Singhose. 2008. “Comparison of Robust Input Shapers.” Journal of Sound and Vibration 315 (4): 797–815. doi:10.1016/j.jsv.2008.02.032.
   Web of Science ®Google Scholar
• Wijin, S., R. Rattanawaorahirankul, C. Laosapan, P. Sanposh, N. Chayopitak, K. Tungpimolrut and H. Kunieda. 2010. “Friction Feedforward Compensation and Position Feedforward in CNC Machines.” In Proceeding of 2010 International Conference on Electrical Engineering/Electronics Computer Telecommunications and Information Technology, Chiang Mai, Thailand, 19–21 May 2010: 178–182. New York: IEEE.
   Google Scholar
• Yi, L., and M. Tomizuka. 1996. “Robust Motion Control of Mechanical Systems with Compliance.” In Proceedings of the 35th IEEE Conference on Decision and Control, Kobe, Japan, 13–13 Dec 1996: 2462–2467. New York: IEEE.
   Google Scholar