Advanced search
Publication Cover
Journal of the Chinese Institute of Engineers Volume 40, 2017 - Issue 6
Submit an article Journal homepage
125
Views
3
CrossRef citations to date
0
Altmetric
Mechanical Engineering

Visualization of counter pressure mechanism in gas-assisted injection molding process

Wen-Ren JongDepartment of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan, R.O.CCorrespondence[email protected]
,
Shyh-Shin HwangDepartment of Mechanical Engineering, Chien Hsin University of Science and Technology, Chien Hsin University, Taoyuan City, Taiwan, R.O.C.
,
Chi-Hung KaoDepartment of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan, R.O.C
,
Yan-Mao HuangDepartment of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan, R.O.C
,
Chien-Chou WuDepartment of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan, R.O.C
&
Song-Hong HongDepartment of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan, R.O.C
Pages 459-470 | Received 21 Apr 2016, Accepted 19 Jul 2017, Published online: 09 Aug 2017

References

  • Chen, L. L. 2002. “A New Design Method of Fish Tail Die to Improve Flow Uniformity in Micro Injection/Extrusion Processes.” Master Thesis, National Yunlin University of Science and Technology.
  • Fathi, S., and A. H. Behravesh. 2007. “Visualization of In-mold Shrinkage in Injection Molding Process.” Polymer Engineering and Science 47 (5): 750–756. doi: 10.1002/pen.20740.
  • Hsiao, Y. L. 2011. “Study of Foaming Control and Part Mechanical Properties during Microcellular Injection Molding Process via a Mechanism of Gas Counter Pressure and Dynamic Mold Temperature Variation.” Master Thesis, Chung Yuan Christian University.
  • Hsieh, I. C. 2006. “Visualization of In-mold Constraint to Affect Shrinkage of Micro Holes during Injection Molding.” Master Thesis, National Yunlin University of Science and Technology.
  • Hsu, K. S. 1995. “Fundamental Study of Gas-Assisted Injection Molding Process.” Master Thesis, Chung Yuan Christian University.
  • Hsu, P. S. 2011. “Study of Foaming Control and Influence on Surface Quality during Microcellular Injection Molding Process via a Mechanism of Gas Counter Pressure and Dynamic Mold Temperature Variation.” PhD Dissertation, Chung Yuan Christian University.
  • Parvez, M. A., N. S. Ong, and S. B. Tor. 2002. “Gas-assisted Injection Molding: The Effects of Process Variables and Gas Channel Geometry.” Journal of Materials Processing Technology 121 (1): 27–35. doi: 10.1016/S0924-0136(01)01184-0.
  • Shih, M. Y. 2012. “Effect of Gas Counter Pressure on the Carbon Fiber Orientation and the Associated Electrical Conductivity in Injection Molded Polymer.” PhD Dissertation, Chung Yuan Christian University.
  • Wu, Y. C. 2000. “Unstable Penetrations in Gas Assisted Injection Molded Bifurcation Parts.” Master Thesis, Chang Gung University.
  • Yang, W. M., and H. Yokoi. 2003. “Visual Analysis of the Flow Behavior of Core Material in a Fork Portion of Plastic Sandwich Injection Molding.” Polymer Testing 22 (1): 37–43. doi: 10.1016/S0142-9418(02)00046-6.
  • Yang, S. Y., S. J. Liu, and W. N. Liu. 1997. “Flow Visualization of the Gas-Assisted Injection Molding Process.” Advances in Polymer Technology 16 (3): 175–183. doi: 10.1002/(SICI)1098-2329(199723)16:3<175::AID-ADV2>3.0.CO;2-Q.
  • Yokoi, H., N. Masuda, and H. Mitsuhata. 2002. “Visualization Analysis of Flow Front Behavior during Filling Process of Injection Mold Cavity by Two-Axis Tracking System.” Journal of Materials Processing Technology 130–131: 328–333. doi:10.1016/S0924-0136(02)00742-2.
  • Yu, C. H. 1997. “Characteristic Study of Hollowed Core Ratio in Gas-Assisted Injection Molded Parts.” Master Thesis, Chung Yuan Christian University.
  • Zheng, G. Q., W. Yang, L. Huang, M. B. Yang, W. Li, C. T. Liu, and C. Y. Shen. 2007. “Flow-Induced Fiber Orientation in Gas-Assisted Injection Molded Part.” Materials Letters 61 (16): 3436–3439. doi: 10.1016/j.matlet.2006.11.085.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.