References
- Chen, L. L. 2002. “A New Design Method of Fish Tail Die to Improve Flow Uniformity in Micro Injection/Extrusion Processes.” Master Thesis, National Yunlin University of Science and Technology.
- Fathi, S., and A. H. Behravesh. 2007. “Visualization of In-mold Shrinkage in Injection Molding Process.” Polymer Engineering and Science 47 (5): 750–756. doi: 10.1002/pen.20740.
- Hsiao, Y. L. 2011. “Study of Foaming Control and Part Mechanical Properties during Microcellular Injection Molding Process via a Mechanism of Gas Counter Pressure and Dynamic Mold Temperature Variation.” Master Thesis, Chung Yuan Christian University.
- Hsieh, I. C. 2006. “Visualization of In-mold Constraint to Affect Shrinkage of Micro Holes during Injection Molding.” Master Thesis, National Yunlin University of Science and Technology.
- Hsu, K. S. 1995. “Fundamental Study of Gas-Assisted Injection Molding Process.” Master Thesis, Chung Yuan Christian University.
- Hsu, P. S. 2011. “Study of Foaming Control and Influence on Surface Quality during Microcellular Injection Molding Process via a Mechanism of Gas Counter Pressure and Dynamic Mold Temperature Variation.” PhD Dissertation, Chung Yuan Christian University.
- Parvez, M. A., N. S. Ong, and S. B. Tor. 2002. “Gas-assisted Injection Molding: The Effects of Process Variables and Gas Channel Geometry.” Journal of Materials Processing Technology 121 (1): 27–35. doi: 10.1016/S0924-0136(01)01184-0.
- Shih, M. Y. 2012. “Effect of Gas Counter Pressure on the Carbon Fiber Orientation and the Associated Electrical Conductivity in Injection Molded Polymer.” PhD Dissertation, Chung Yuan Christian University.
- Wu, Y. C. 2000. “Unstable Penetrations in Gas Assisted Injection Molded Bifurcation Parts.” Master Thesis, Chang Gung University.
- Yang, W. M., and H. Yokoi. 2003. “Visual Analysis of the Flow Behavior of Core Material in a Fork Portion of Plastic Sandwich Injection Molding.” Polymer Testing 22 (1): 37–43. doi: 10.1016/S0142-9418(02)00046-6.
- Yang, S. Y., S. J. Liu, and W. N. Liu. 1997. “Flow Visualization of the Gas-Assisted Injection Molding Process.” Advances in Polymer Technology 16 (3): 175–183. doi: 10.1002/(SICI)1098-2329(199723)16:3<175::AID-ADV2>3.0.CO;2-Q.
- Yokoi, H., N. Masuda, and H. Mitsuhata. 2002. “Visualization Analysis of Flow Front Behavior during Filling Process of Injection Mold Cavity by Two-Axis Tracking System.” Journal of Materials Processing Technology 130–131: 328–333. doi:10.1016/S0924-0136(02)00742-2.
- Yu, C. H. 1997. “Characteristic Study of Hollowed Core Ratio in Gas-Assisted Injection Molded Parts.” Master Thesis, Chung Yuan Christian University.
- Zheng, G. Q., W. Yang, L. Huang, M. B. Yang, W. Li, C. T. Liu, and C. Y. Shen. 2007. “Flow-Induced Fiber Orientation in Gas-Assisted Injection Molded Part.” Materials Letters 61 (16): 3436–3439. doi: 10.1016/j.matlet.2006.11.085.