References
- Al-Badour, F., N. Merah, A. Shuaib, and A. Bazoune. 2013. “Coupled Eulerian Lagrangian Finite Element Modeling of Friction Stir Welding Processes.” Journal of Materials Processing Technology 213 (8): 1433–1439. doi:https://doi.org/10.1016/j.jmatprotec.2013.02.014.
- Aota, K., and K. Ikeuchi. 2009. “Development of Friction Stir Spot Welding Using Rotating Tool without Probe and Its Application to Low-Carbon Steel Plates.” Welding International 23 (8): 572–580. doi:https://doi.org/10.1080/09507110802543054.
- ASM International. Handbook Committee. 1990. ASM Handbook. Materials Park, OH: ASM International.
- Avallone, E., and T. Baumeister. 1987. Mark’s Standard Handbook for Mechanical Engineers. 9th ed. United States of America: McGraw Hill.
- Bakavos, D., Y. Chen, L. Babout, and P. Prangnell. 2011. “Material Interactions in a Novel Pinless Tool Approach to Friction Stir Spot Welding Thin Aluminum Sheet.” Metallurgical and Materials Transactions A 42 (5): 1266–1282. doi:https://doi.org/10.1007/s11661-010-0514-x.
- Bhushan, B. 2013. “Interface Temperature of Sliding Surfaces.” In Principles and Applications of Tribology, 402–445. 2nd ed. New York: Wiley.
- Buffa, G., J. Hua, R. Shivpuri, and L. Fratini. 2006. “Design of the Friction Stir Welding Tool Using the Continuum Based FEM Model.” Materials Science and Engineering: A 419 (1–2): 381–388. doi:https://doi.org/10.1016/j.msea.2005.09.041.
- Chao, Y. J., S. Liu, and C. H. Chien. 2008. “Friction Stir Welding of Al 6061-T6 Thick Plates: Part II – Numerical Modeling of the Thermal and Heat Transfer Phenomena.” Journal of the Chinese Institute of Engineer 31 (5): 769–779. doi:https://doi.org/10.1080/02533839.2008.9671431.
- Chiou, Y. C., C. T. Liu, and R. T. Lee. 2013. “A Pinless Embedded Tool Used in FSSW and FSW of Aluminum Alloy.” Journal of Materials Processing Technology 213 (11): 1818–1824. doi:https://doi.org/10.1016/j.jmatprotec.2013.04.018.
- Chu, Q., X.W. Yang, W.Y. Li, A. Vairis, and W.B. Wang. 2018. “Numerical Analysis of Material Flow in the Probeless Friction Stir Spot Welding Based on Coupled Eulerian-Lagrangian Approach.” Journal Manufacturing Processes 36: 181–187. doi:https://doi.org/10.1016/j.jmapro.2018.10.013.
- Hsieh, M. J., Y. C. Chiou, and R. T. Lee. 2015. “Friction Stir Spot Welding of Low-Carbon Steel Using an Assembly-Embedded Rod Tool.” Journal of Materials Processing Technology 224: 149–155. doi:https://doi.org/10.1016/j.jmatprotec.2015.04.033.
- Hsieh, M. J., R. T. Lee, and Y. C. Chiou. 2017. “Friction Stir Spot Fusion Welding of Low-Carbon Steel to Aluminum Alloy.” Journal of Materials Processing Technology 240: 118–125. doi:https://doi.org/10.1016/j.jmatprotec.2016.08.034.
- Nandan, R., G. G. Roy, and T. Debroy. 2006. “Numerical Simulation of Three Dimensional Heat Transfer and Plastic Flow during Friction Stir Welding.” Metallurgical and Materials Transactions A 37 (4): 1247–1259. doi:https://doi.org/10.1007/s11661-006-1076-9.
- Nandan, R., G. G. Roy, T. J. Lienert, and T. Debroy. 2006. “Numerical Simulation of Three Dimensional Heat Transfer and Plastic Flow during Friction Stir Welding of Stainless Steel.” Science and Technology of Welding and Joining 11 (5): 526–537. doi:https://doi.org/10.1179/174329306X107692.
- Nandan, R., G. G. Roy, T. J. Lienert, and T. Debroy. 2007. “Three-Dimensional Heat and Material Flow during Friction Stir of Mild Steel.” Acta Materialia 55 (3): 883–895. doi:https://doi.org/10.1016/j.actamat.2006.09.009.
- Schmidt, H., J. Hattel, and J. Wert. 2004. “An Analytical Model for Heat Generation in Friction Stir Welding.” Modelling and Simulation in Materials Science and Engineering 12 (1): 143–157. doi:https://doi.org/10.1088/0965-0393/12/1/013.
- Seidel, T. U., and A. P. Reynolds. 2003. “Two-Dimensional Friction Stir Welding Process Model Based on Fluid Mechanics.” Science and Technology of Welding and Joining 8 (3): 175–183. doi:https://doi.org/10.1179/136217103225010952.
- Sheppard, T., and D. S. Wright. 1979. “Determination of Flow Stress: Part 1 Constitutive Equation for Aluminium Alloys at Elevated Temperatures.” Metals Technology 6 (1): 215–223. doi:https://doi.org/10.1179/030716979803276264.
- Zhang, B., X. Chen, K.X. Pan, M. Li, and J.N. Wang. 2019. “Thermo-Mechanical Simulation Using Microstructure-Based Modeling of Friction Stir Spot Welded AA 6061-T6.” Journal of Manufacturing Processes 37: 71–81. doi:https://doi.org/10.1016/j.jmapro.2018.11.010.