References
- Bertolo, P., and G. F. Wieczorek. 2005. “Calibration of Numerical Models for Small Debris Flows in Yosemite Valley, California, USA.” Natural Hazards and Earth System Sciences 5 (6): 993–1001. doi:https://doi.org/10.5194/nhess-5-993-2005.
- Chang, W.-T., and S.-H. Hsieh. 2009. “Parallelization of Discrete Element Simulation.” Journal of the Chinese Institute of Engineers 32 (6): 825–841. doi:https://doi.org/10.1080/02533839.2009.9671566.
- Chen, F., Y.-B. Tian, and M. Yang. 2014. “Research and Design of Parallel Swarm Optimization Algorithm Based on CUDA.” Computer Science 41 (9): 263–268. doi:https://doi.org/10.11896/j.1002-137X.2014.09.050.
- Chen, R., X. Liu, S. Cao, and Z.X Guo. 2011. “Numerical Simulation of Deposit in Confluence Zone of Debris Flow and Mainstream.” Science China Technological Sciences 54 (10): 2618–2628. doi:https://doi.org/10.1007/s11431-011-4510-1.
- Chiu, C.-C, M.-C. Weng, and T.-H Huang. 2015. “Biconcave Bond Nodel for Cemented Granular Material.” Journal of GeoEngineering 10 (3): 91–103. doi:https://doi.org/10.6310/jog.2015.10(3).3.
- Clavet, S., P. Beaudoin, and P. Poulin. 2005. “Particle-Based Viscoelastic Fluid Simulation.” In Proceedings of the 2005 ACM SIGGRAPH/Eurographics symposium on Computer animation, Los Angeles, CA, USA. 29–31 July 2005:219–228. New York: Association for Computing Machinery.
- D’Agostino, V., M. Cesca,and, and L. Marchi. 2010. “Field and Laboratory Investigations of Runout Distances of Debris Flows in the Dolomites (Eastern Italian Alps).” Geomorphology 115 (3–4): 294–304. doi:https://doi.org/10.1016/j.geomorph.2009.06.032.
- Do, T.N, and J.H. Wu. 2020. “Simulating A Mining-Triggered Rock Avalanche Using DDA: A Case Study in Nattai North, Australia.” Engineering Geology 264: 105386-1-105386-14. doi:https://doi.org/10.1016/j.enggeo.2019.105386.
- Han, X., J. Chen, P. Xu., C. Niu, and J. Zhan. 2017. “Runout Analysis of a Potential Debris Flow in the Dongwopu Gully Based on a Well-Balanced Numerical Model over Complex Topography.” Bulletin of Engineering Geology and the Environment 77 (11): 1–11. doi:https://doi.org/10.1007/s10064-017-1079-3.
- Henderson, T.C., and N. Boonsirisumpun. 2013. “Issues Related to Parameter Estimation in Model Accuracy Assessment.” Procedia Computer Science 18: 1969–1978. doi:https://doi.org/10.1016/j.procs.2013.05.366.
- Hill, K.M, Y. Bereket, W.E. Dietrich, and H. Leslie. 2011. “Discrete Element Modeling and Large Scale Experimental Studies of Boulder Debris Flows.” In 5th International Conference on Debris-Flow Hazards Mitigation: Mechanics, Prediction, and Assessment. Padua, Italy, 14–17 June 2011: 435–447. Italy: Casa Editrice Università La Sapienza.
- Iverson, R. M., M. Logan, R. G. LaHusen, and M. Berti. 2010. “The Perfect Debris Flow? Aggregated Results from 28 Large-Scale Experiments.” Journal of Geophysical Research. Earth Surface 115 (F3): 1–29. doi:https://doi.org/10.1029/2009jf001514.
- Iverson, R.M. 1997. “The Physics of Debris Flows.” Reviews of Geophysics 35 (3): 245–296. doi:https://doi.org/10.1029/97rg00426.
- Kohei, A., and A. Basuki. 2010. “A Cellular Automata Based Approach for Prediction of Hot Mudflow Disaster Area.” In Proceedings of the 2010 international conference on Computational Science and Its Applications, Fukuoka, Japan, 23–26 March 2010:87–98. New York: Springer.
- Laigle, D., and P. Coussot. 1997. “Numerical Modeling of Mudflows.” Journal of Hydraulic Engineering 123 (7): 617–623. doi:https://doi.org/10.1061/(asce)0733-9429(1997)123:7(617).
- Li, B., A.G. Xing, and C. Xu. 2017. “Simulation of a Long-Runout Rock Avalanche Triggered by the Lushan Earthquake in the Tangjia Valley, Tianquan, Sichuan, China.” Engineering Geology 218: 107–116. doi:https://doi.org/10.1016/j.enggeo.2017.01.007.
- Li, X., S. He, Y. Luo, and Y. Wu. 2011. “Simulation of the Sliding Process of Donghekou Landslide Triggered by the Wenchuan Earthquake Using a Distinct Element Method.” Environmental Earth Sciences 65 (4): 1049–1054. doi:https://doi.org/10.1007/s12665-011-0953-8.
- Lin, C., and D. Ling. 2017. “Simulation of Real Particle Shape in PFC Numerical Analysis.” [In Chinese.]. Journal of Central South University (Science and Technology) 48 (9): 2425–2431. doi:https://doi.org/10.11817/j.1672-7207.2017.09.022.
- Ma, D.T, P. Cui, J.S Zhang, and H.L Li. 2005. “Formation Cause and Features of Mudflows in the Loess Plateau,China.” [In Chinese.]. Arid Land Geography 28 (4): 435–440. doi:https://doi.org/10.3321/j.1000-6060.2005.04.004.
- Major, J.J. 1997. “Depositional Processes in Large-Scale Debris-Flow Experiments.” The Journal of Geology 105 (3): 345–366. doi:https://doi.org/10.1086/515930.
- Manzella, I., and V. Labiouse. 2008. “Qualitative Analysis of Rock Avalanches Propagation by Means of Physical Modelling of Non-Constrained Gravel Flows.” Rock Mechanics and Rock Engineering 41 (1): 133–151. doi:https://doi.org/10.1007/s00603-007-0134-y.
- Mindlin, R.D., W. P. Mason, and H. Deresiewicz. 1953. “Elastic Spheres in Contact under Varying Oblique Forces.” Journal of Applied Mechanics 20 (3): 327–344. doi:https://doi.org/10.1007/978-1-4613-8865-4_35.
- Ng, C.W.W., C.E. Choi,and, and R.P.H. Law. 2013. “Longitudinal Spreading of Granular Flow in Trapezoidal Channels.” Geomorphology 194: 84–93. doi:https://doi.org/10.1016/j.geomorph.2013.04.016.
- Prochaska, A.B., P.M. Santi, J.D. Higgins,and, and S.H. Cannon. 2008. “Debris-Flow Runout Predictions Based on the Average Channel Slope (ACS).” Engineering Geology 98 (1): 29–40. doi:https://doi.org/10.1016/j.enggeo.2008.01.011.
- Sun, X.P., P. Zeng, T.B. Li, T. Zhang, X. Feng, and R. Jimenez. 2020. “Run-Out Distance Exceedance Probability Evaluation and Hazard Zoning of an Individual Landslide.” Landslides 18 (7): 1295–1308. doi:https://doi.org/10.1007/s10346-020-01545-w.
- Wang, Y.Y, K.H. Hu, and F.Q. Wei. 2007. “Relationship between Rheology and Erosion-Deposit Properties of Debris Flow and Its Hazard Degree.” [In Chinese]. Journal of Natural Disasters 16 (1): 17–22.
- Wu, J. -H., T. N. Do, C. -H. Chen, and G. Wang. 2017. “New Geometric Restriction for the Displacement-Constraint Points in Discontinuous Deformation Analysis.” International Journal of Geomechanics 17 (5): E4016002-1-E4016002-16. doi:https://doi.org/10.1061/(ASCE)GM.1943-5622.0000648.
- Xu Q.Y., J.Ye,and Y. J.Lyu. 2021 ”A multi-source data fusion modeling method for debris flow prevention engineering.” Journal of Mountain Science 18(4):1049–1061. doi:https://doi.org/10.1007/s11629-020-6332-8
- Yang, H.J., F.Q. Wei, and K.H. Hu. 2016. “Rheological Parameters of Debris Flow Slurries with Different Maximum Grain Sizes.” [In Chinese.]. Shuili Xuebao 47 (7): 884–890. doi:https://doi.org/10.13243/j.cnki.slxb.20150931.
- Yang, H.Q, Y.F. Lan, L. Lu., and X. P. Zhou. 2015. “A Quasi-Three-Dimensional Spring-Deformable-Block Model for Runout Analysis of Rapid Landslide Motion.” Engineering Geology 185: 20–32. doi:https://doi.org/10.1016/j.enggeo.2014.11.016.
- Yu, C.-Y., J. Liu, J. Zhang, K. Xue, S. Zhang, J. Liao, Q.-L. Tai, and D.-Q. Zhu. 2021. “Design and Optimization and Experimental Verification of a Segmented Double-Helix Blade Roller for Straw Returning Cultivators.” Journal of the Chinese Institute of Engineers 44 (4): 379–387. doi:https://doi.org/10.1080/02533839.2021.1903342.
- Zhou, G. D., P. Cui, J. B. Tang, H. Y. Chen, Q. Zou, and Q. C. Sun. 2015. “Experimental Study on the Triggering Mechanisms and Kinematic Properties of the Large Debris Flows Occurred in Wenjia Gully.” Engineering Geology 194: 52–61. doi:https://doi.org/10.1016/j.enggeo.2014.10.021.
- Zhou, G.D., S. Li, D. Song, C.E Choi, and X. Chen. 2019. “Depositional Mechanisms and Morphology of Debris Flow: Physical Modelling.” Landslides 16 (2): 315–332. doi:https://doi.org/10.1007/s10346-018-1095-9.
- Zhou, J.-W., F.-G. Xu, and C.-X. Guo. 2016. “Effects of Model Parameters, Topography, and Scale on the Mass Movement Processes of Debris Avalanches Using the Discrete Element Method.” Arabian Journal of Geosciences 9:418-1-418-14. doi:https://doi.org/10.1007/s12517-016-2441-7.
- Zhou, J.-W., P. Cui, and H. Fang. 2010. “Dynamic Process Analysis for the Formation of Yangjiagou Landslide-Dammed Lake Triggered by the Wenchuan Earthquake, China.” Landslides 10 (3): 331–342. doi:https://doi.org/10.1007/s10346-013-0387-3.
- Zhu, C.-X., Y. Wang, N. Zhao, C.-L. Zhu, and C.-Y. Liu. 2021. “Numerical Simulation and Experimental Verification of the Airfoil Electrothermal Deicing System Performance.” Journal of the Chinese Institute of Engineers 44 (7): 608–617. doi:https://doi.org/10.1080/02533839.2021.1940292.