References
- Abdullah, A.H. D., A.K. Fikriyyah, O. D. Putri, and P. P. P. Asri. 2019. “Fabrication and Characterization of Poly Lactic Acid (Pla)-starch Based Bioplastic Composites.” IOP Conference Series: Materials Science and Engineering 553 (1): 012052. doi:https://doi.org/10.1088/1757-899X/553/1/012052.
- Antonio, D.A., R. L. Angel, S.R. Carlos, and M.G. Maria Henar. 2018. “Experimental Analysis of Drilling Induced Damage in Bio Composites.” Textile Research Journal 88 (22): 2544–2558. doi:https://doi.org/10.1177/0040517517725118.
- Babu, J., N.P. Alex, S.P. Abraham, J.Philip Anoop, B N Anoop, and J. P. Davim. 2017. “Development of a Comprehensive Delamination Assessment Factor and Its Evaluation with High-Speed Drilling of Composite Laminates Using a Twist Drill.” Part B: Journal of Engineering Manufacture 232 (12): 2109–2121. doi:https://doi.org/10.1177/0954405417690552.
- Bajpai, P.K., and I. Singh. 2013. “Drilling Behavior of Sisal Fiber-Reinforced Polypropylene Composite Laminates.” Journal of Reinforced Plastics and Composites 32 (20): 1569–1576. doi:https://doi.org/10.1177/0731684413492866.
- Bajpai, P. K., I. Singh, and J. Madaan. 2012. “Development and Characterization of PLA-Based Green Composites: A Review.” Journal of Thermoplastic Composite Materials 27 (1): 52–81. doi:https://doi.org/10.1177/0892705712439571.
- Baraheni, M., R. Shabgard, and S. Amini. 2021. “Evaluating the Hole Quality Produced by Vibratory Drilling: Additive Manufactured PLA+.” The International Journal of Advanced Manufacturing Technology 117 (3–4): 785–794. doi:https://doi.org/10.1007/s00170-021-07750-8.
- Battegazzore, D., A. Noori, and A. Frache. 2018. “Natural Wastes as Particle Filler for Poly (Lactic Acid) Based Composites.” Journal of Composite Materials 53 (6): 783–797. doi:https://doi.org/10.1177/0021998318791316.
- Belaadi, A., H. Laouici, and M. Bourchak. 2020. “Mechanical and Drilling Performance of Short Jute Fibre-Reinforced Polymer Bio Composites: Statistical Approach.” The International Journal of Advanced Manufacturing Technology 106 (5–6): 1–18. doi:https://doi.org/10.1007/s00170-019-04761-4.
- Bertollo, N., and W. R. Walsh. 2011. “Drilling of Bone: Practicality, Limitations and Complications with Surgical Drill-Bits.” In Biomechanics in Applications. Sydney: IntechOpen.
- Cheung, H.Y., K. T. Lau, X.M. Tao, and D. Hui. 2008. “A Potential Material for Tissue Engineering: Silkworm Silk/PLA Biocomposite.” Composites Part B: Engineering 39 (6): 1026–1033. doi:https://doi.org/10.1016/j.compositesb.2007.11.009.
- Doan, T. T. L., H. M. Brodowsky, and E. Mäder. 2016. Polyolefine Composites Reinforced by Rice Husk and Saw Dust. Vietnam: IntechOpen.
- Erturk, A.T., F. Vatansever, E. Yarar, and S. Karabay. 2019. “Machining Behavior of Multiple Layer Polymer Composite Bearing with Using Different Drill Bits.” Composites Part B: Engineering 176: 107318. doi:https://doi.org/10.1016/j.compositesb.2019.107318.
- Haniff, M., M. Bijarimi, A. Zaidi, M.S. Zaidi, and S. Ahmad. 2018. “Preparation and Characterization of Poly (Lactic Acid) (PLA)/ Polyoxymethylene (POM) Blends.” Materials Science Forum 917: 3–6. 10.4028/www.scientific.net/MSF.917.3.
- John, R., R. Lin, K. Jayaraman, and D. Bhattacharyya. 2020. “Effects of Machining Parameters on Surface Quality of Composites Reinforced with Natural Fibers.” Materials and Manufacturing Processes 36 (1): 73–83. doi:https://doi.org/10.1080/10426914.2020.1813896.
- Kumar, D., K. K Singh, and R. Zitoune. 2016. “Experimental Investigation of Delamination and Surface Roughness in the Drilling of GFRP Composite Material with Different Drills.” Advanced Manufacturing: Polymer & Composites Science 2 (2): 47–56. doi:https://doi.org/10.1080/20550340.2016.1187434.
- Liu, H., and J. Zhang. 2011. “Research Progress in Toughening Modification of Poly (Lactic Acid): A Review.” Journal of Polymer Science. Part B, Polymer Physics 49 (15): 1051–1083. doi:https://doi.org/10.1002/polb.22283.
- Lotfi, A., H Li, and D.V. Dao. 2018. “Drilling Behavior of Flax/Poly (Lactic Acid) Bio-Composite Laminates: An Experimental Investigation.” Journal of Natural Fibers 17 (9): 1264–1280. doi:https://doi.org/10.1080/15440478.2018.1558158.
- Morales, A.P., A. Güemes, A. Fernandez-Lopez, V.C. Valero, and S. D.L. R. Llano. 2017. “Bamboo–Polylactic Acid (PLA) Composite Material for Structural Applications.” Materials 10 (11): 1286. doi:https://doi.org/10.3390/ma10111286.
- Nagaraja, A., M.A. Herbert, D. Shetty, G .S. Vijay, and R. Shetty. 2014. “Evaluation of Drilling Induced Delamination of Carbon Fiber Reinforced Polymer Composite Using Solid Carbide Drills.” European Scientific Journal 10 (15): 279–292. doi:https://doi.org/10.19044/esj.2014.v10n15p/25p.
- Pandey, K., R. Antil, S. Saha, J. Jacob, and B. Balavairavan. 2019. “Poly (Lactic acid)/Thermoplastic Polyurethane/Wood Flour Composites: Evaluation of Morphology, Thermal, Mechanical and Biodegradation Properties.” Materials Research Express 6 (12): 125306. doi:https://doi.org/10.1088/2053-1591/ab5398.
- Ramachandran, M., and K. Modi. 2018. “A Review on Various Characterization of PLA Based Biodegradable Composites.” International Journal on Textile Engineering and Processes 4 (1): 26–31. doi:https://doi.org/10.19080/JOJMS.2018.04.555626.
- Ramesh, B., A. Elayaperumal, and S. Satishkumar. 2015. “Drillability Study of Pultruded and Sheet Moulding Compound Thick Polymeric Composites.” The Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231: 268–285. doi:https://doi.org/10.1177/0954405415573678.
- Ramesh, B., A. Elayaperumal, S. Satishkumar, and Anish Kumar. 2018. “Drilling of Pultruded and Liquid Composite Moulded Glass/epoxy Thick Composites: Experimental and Statistical Investigation.” Measurement 114: 109–121. doi:https://doi.org/10.1016/j.measurement.2017.09.026.
- Ramesh, B., A. Elayaperumal, S. Satishkumar, Anish Kumar, and T. Jayakumar. 2015a. “Effect of Drill Point Geometry on Quality Characteristics and Multiple Performance Optimization in Drilling of Nonlaminated Composites.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 (2): 558–568. doi:https://doi.org/10.1177/1464420715581865.
- Ramesh, B., A. Elayaperumal, S. Satishkumar, Anish Kumar, and T. Jayakumar. 2015b. “Experimental Investigation of the Effect of Different Cooling Methods on Drill-Induced Damage in Pultruded Composites.” Polymer Composites 37: 2855–2859. doi:https://doi.org/10.1002/pc.23482.
- Ramesh, B., A. Elayaperumal, S. Satishkumar, A Kumar, T. Jayakumar, and D. Dinakaran. 2016. “Influence of Cooling on the Performance of the Drilling Process of Glass Fibre Reinforced Epoxy Composites.” Archives of Civil and Mechanical Engineering 16 (1): 135–146. doi:https://doi.org/10.1016/j.acme.2015.03.001.
- Shahabaz, S. M., N. Shetty, S. D. Shetty, and S. S. Sharma. 2020. “Surface Roughness Analysis in the Drilling of Carbon Fiber/Epoxy Composite Laminates Using Hybrid Taguchi-Response Experimental Design.” Materials Research Express 7 (1): 1–12. doi:https://doi.org/10.1088/2053-1591/ab6198.
- Shogrena, R. L., W. M. Doaneb, D. Garlottaa, J. W. Lawtona, and J. L. Willetta. 2003. “Biodegradation of Starch/Polylactic Acid/Poly (Hydroxyester-ether) Composite Bars in Soil.” Polymer Degradation and Stability 79 (3): 405–411. doi:https://doi.org/10.1016/S0141-3910(02)00356-7.
- Singh, J.I.P., S. Singh, and V. Dhawan. 2018. “Mechanical and Biodegradation Behavior of Jute/Polylactic Acid Green Composites.” Asian Journal of Engineering and Applied Technology 7 (2): 52–57. doi:https://doi.org/10.51983/ajeat-2018.7.2.956.
- Srinivasan, T., K. Palanikumar, K. Rajagopal, and B. Latha. 2016. “Optimization of Delamination Factor in Drilling GFR-Polypropylene Composites.” Materials and Manufacturing Processes 32 (2): 226–233. doi:https://doi.org/10.1080/10426914.2016.1151038.
- Xu, J., X. Huang, J. Paulo Davim, M. Ji, and M. Chen. 2020. “On the Machining Behavior of Carbon Fiber Reinforced Polyimide and PEEK Thermoplastic Composites.” Polymer Composites 41 (9): 3649–3663. doi:https://doi.org/10.1002/pc.25663.