Optimization and innovative design of dental implants under dynamic finite element analysis

References

• Ahmadian, M. T., K. Firoozbakhsh, and G. Ghanati. 2010. “The Dynamic Analysis of a Novel Dental Implant with a Viscoelastic Internal Damping Layer”. In 2010 17th Iranian Conference of Biomedical Engineering (ICBME), Isfahan, Iran, 3-4 November 2010: 1–4. Washington, DC: IEEE.
   Google Scholar
• Alemayehu, D. B., and Y. R. Jeng. 2021. “Three-Dimensional Finite Element Investigation into Effects of Implant Thread Design and Loading Rate on Stress Distribution in Dental Implants and Anisotropic Bone.” Materials 14 (22): 6974. doi:10.3390/ma14226974.
   PubMed Web of Science ®Google Scholar
• Anitua, E., N. L. S. de Ibarra, I. M. Martín, and L. S. Rotaeche. 2021. “Influence of Dental Implant Diameter and Bone Quality on the Biomechanics of Single-Crown Restoration. A Finite Element Analysis.” Dentistry Journal 9 (9): 103. doi:10.3390/dj9090103.
   PubMedGoogle Scholar
• Bayata, F., and C. Yildiz. 2020. “The Effects of Design Parameters on Mechanical Failure of Ti-6Al-4V Implants Using Finite Element Analysis.” Engineering Failure Analysis 110: 10445. doi:10.1016/j.engfailanal.2020.104445.
   Web of Science ®Google Scholar
• Cheng, Y. C., C. K. Lee, and P. Pornteparak. 2020. “An Improved Design of an On-Road Bicycle Frame Under Fatigue Testing Simulations.” Journal of the Chinese Institute of Engineers 43 (4): 319–327. doi:10.1080/02533839.2020.1719894.
   Web of Science ®Google Scholar
• Chou, I. C., S. Y. Lee, M. C. Wu, C. W. Sun, and C. P. Jiang. 2014. “Finite Element Modelling of Implant Designs and Cortical Bone Thickness on Stress Distribution in Maxillary Type IV Bone.” Computer Methods in Biomechanics and Biomedical Engineering 17 (5): 516–526. doi:10.1080/10255842.2012.697556.
   PubMed Web of Science ®Google Scholar
• Demirbas, A. E., R. Ekici, M. Karakaya, and A. Alkan. 2022. “Bone Stress and Damage Distributions During Dental Implant Insertion: A Novel Dynamic FEM Analysis.” Computer Methods in Biomechanics and Biomedical Engineering 25 (12): 1381–1392. doi:10.1080/10255842.2021.2012765.
   PubMed Web of Science ®Google Scholar
• Ellenrieder, M., R. Souffrant, C. Schulze, W. Mittelmeier, and R. Bader. 2020. “Micromotion and Subsidence of a Cementless Conical Fluted Stem Depending on Femoral Defect Size – a Human Cadaveric Study.” Clinical Biomechanics 80: 105202. doi:10.1016/j.clinbiomech.2020.105202.
   PubMed Web of Science ®Google Scholar
• Fang, K. T., D. K. J. Lin, P. Winker, and Y. Zhang. 2000. “Uniform Design: Theory and Application.” Technometrics 42 (3): 237–248. doi: 10.1080/00401706.2000.10486045.
   Web of Science ®Google Scholar
• Fiorillo, L., M. Cicciù, C. D’Amico, R. Mauceri, G. Oteri, and G. Cervino. 2020. “Finite Element Method and von Mises Investigation on Bone Response to Dynamic Stress with a Novel Conical Dental Implant Connection.” BioMed Research International 2020: 2976067. doi:10.1155/2020/2976067.
   PubMed Web of Science ®Google Scholar
• Fiorillo, L., D. Milone, D. D’Andrea, D. Santonocito, G. Risitano, G. Cervino, and M. Cicciù. 2022. “Finite Element Analysis of Zirconia Dental Implant.” Prosthesis 4 (3): 490–499. doi:10.3390/prosthesis4030040.
   Google Scholar
• Grishin, P., R. Saleev, S. Ksembaev, O. Torgashova, and E. Kalinnikova. 2022. “Finite Element Analysis of the Humana Dental Implants with an Innovative Surface and Thread Design to Reveal the Stress Distribution in the Implant, Bone Tissue and at the Abutment-Implant-Bone Interface.” Actual Problems in Dentistry 18 (1): 99–107. doi:10.18481/2077-7566-22-18-1-99-107.
   Google Scholar
• Gu, Y. T., Q. X. Wang, and K. Y. Lam. 2007. “A Meshless Local Kriging Method for Large Deformation Analyses.” Computer Methods in Applied Mechanics and Engineering 196 (9–12): 1673–1684. doi:10.1016/j.cma.2006.09.017.
   Web of Science ®Google Scholar
• Haïat, G., H. L. Wang, and J. Brunski. 2014. “Effects of Biomechanical Properties of the Bone–Implant Interface on Dental Implant Stability: From in silico Approaches to the Patient’s Mouth.” Annual Review of Biomedical Engineering 16 (1): 187–213.doi:10.1146/annurev-bioeng-071813-104854.
   PubMedGoogle Scholar
• Han, S., R. V. Patel, S. K. Ismaily, H. L. Jones, J. E. Gold, and P. C. Noble. 2021. “Micromotion and Migration of Cementless Tibial Trays Under Functional Loading Conditions.” The Journal of Arthroplasty 36 (1): 349–355. doi:10.1016/j.arth.2020.07.017.
   PubMed Web of Science ®Google Scholar
• Hudieb, M. I., N. Wakabayashi, O. A. Abu-Hammad, and S. Kasugai. 2019. “Biomechanical Effect of an Exposed Dental Implant’s First Thread: A Three-Dimensional Finite Element Analysis Study.” Medical Science Monitor 25: 3933–3940. doi:10.12659/MSM.913186.
   PubMed Web of Science ®Google Scholar
• Hudieb, M. I., N. Wakabayashi, and S. Kasugai. 2011. “Magnitude and Direction of Mechanical Stress at the Osseointegrated Interface of the Microthread Implant.” Journal of Periodontology 82 (7): 1061–1070. doi:10.1902/jop.2010.100237.
   PubMed Web of Science ®Google Scholar
• Ivanoff, C. J., K. Gröndahl, L. Sennerby, C. Bergström, and U. Lekholm. 1999. “Influence of Variations in Implant Diameters: A 3- to 5-Year Retrospective Clinical Report.” The International Journal of Oral & Maxillofacial Implants 14 (2): 173–180.
   PubMed Web of Science ®Google Scholar
• Jiang, C. P., C. K. Lee, W. L. Tsai, and Y. C. Cheng. 2014. “Uniform Design and Dynamic Finite Element Analysis for Micromotion Improvement of Semados Dental Implant System Under Dynamic Chewing Loads.” Journal of Mechanics in Medicine and Biology 14 (6): 1440007. doi:10.1142/S0219519414400077.
   Web of Science ®Google Scholar
• John, V., S. Chen, and P. Parashos. 2007. “Implant or the Natural Tooth-A Contemporary Treatment Planning Dilemma?” Australian Dental Journal 52: S138–S150. doi:10.1111/j.1834-7819.2007.tb00521.x.
   PubMed Web of Science ®Google Scholar
• Kim, Y. M., J. B. Lee, H. S. Um, B. S. Chang, and J. K. Lee. 2022. “Long-Term Effect of Implant-Abutment Connection Type on Marginal Bone Loss and Survival of Dental Implants.” Journal of Periodontal & Implant Science 52 (6): 496–508. doi:10.5051/jpis.2200960048.
   PubMed Web of Science ®Google Scholar
• Kırmalı, Ö., N. Türker, T. Akar, and B. Yılmaz. 2022. “Finite Element Analysis of Stress Distribution in Autotransplanted Molars.” Journal of Dentistry 119: 104082. doi:10.1016/j.jdent.2022.104082.
   PubMed Web of Science ®Google Scholar
• Leclerc, F., J. Y. Potvin, and J. Y. Potvin. 1997. “Genetic Algorithms for Vehicle Dispatching.” International Transactions in Operational Research 4 (5–6): 391–400. doi:10.1111/j.1475-3995.1997.tb00094.x.
   Google Scholar
• Lee, C. K., Y. C. Cheng, and C. P. Jiang. 2015. “Explicit Dynamic Finite Element Analysis and Uniform Design with Kriging Interpolation and Optimization to Improve an On-Road Bicycle Frame Undergoing Drop-Mass Impact Test.” Journal of the Chinese Society of Mechanical Engineers 36 (4): 353–361.
   Web of Science ®Google Scholar
• Lerner, H., J. Lorenz, R. A. Sader, and S. Ghanaati. 2018. “Peri-Implant Health and Peri-Implant Bone Stability After Immediate Implant Placement.” Modern Research in Dentistry 3 (1): 1–11. doi:10.31031/MRD.2018.03.000555.
   Google Scholar
• Lin, C. P., S. H. Lu, J. X. Zhu, H. C. Hu, Z. G. Yue, and Z. H. Tang. 2019. “Influence of Thread Shapes of Custom-Made Root-Analogue Implants on Stress Distribution of Peri-Implant Bone: A Three-Dimensional Finite Element Analysis.” Journal of Peking University (Health Sciences) 51 (6): 1130–1137. doi:10.19723/j.issn.1671-167X.2019.06.027.
   Google Scholar
• Li, T. Z., and X. L. Yang. 2019. “An Efficient Uniform Design for Kriging-Based Response Surface Method and Its Application.” Computer Geotech 109: 12–22. doi:10.1016/j.compgeo.2019.01.009.
   Web of Science ®Google Scholar
• Lorenz, J., H. Lerner, R. A. Sader, and S. Ghanaati. 2017. “Investigation of Peri-Implant Tissue Conditions and Peri-Implant Tissue Stability in Implants Placed with Simultaneous Augmentation Procedure: A 3-Year Retrospective Follow-Up Analysis of a Newly Developed Bone Level Implant System.” International Journal of Implant Dentistry 3 (41): 1–9. doi:10.1186/s40729-017-0104-4.
   PubMedGoogle Scholar
• Matsuoka, T., T. Nakano, S. Yamaguchi, S. Ono, S. Watanabe, T. Sato, and Hirofumi Yatani. 2021. “Effects of Implant–Abutment Connection Type and Inter-Implant Distance on Inter-Implant Bone Stress and Microgap: Three-Dimensional Finite Element Analysis.” Materials 14 (9): 2421. doi:10.3390/ma14092421.
   PubMed Web of Science ®Google Scholar
• Matta, R. E., K. Riegger, H. Trägler, W. Adler, S. Eitner, M. Wichmann, and C. Motel. 2021. “Establishment of a New Biomechanical Measurement Method for Surface Deformation of Bone by Force Application via Dental Implants—A Pilot Study.” Applied Sciences 11 (16): 7568. doi:10.3390/app11167568.
   Google Scholar
• Ma, P., W. Xiong, B. Tan, W. Geng, J. Liu, W. Li, and D. Li. 2014. “Influence of Thread Pitch, Helix Angle, and Compactness on Micromotion of Immediately Loaded Implants in Three Types of Bone Quality: A Three-Dimensional Finite Element Analysis.” BioMed Research International 2014 (983103): 13.doi:10.1155/2014/983103.
   Google Scholar
• McLean, P., P. Léger, and R. Tinawi. 2006. “Post-Processing of Finite Element Stress Fields Using Dual Kriging Based Methods for Structural Analysis of Concrete Dams.” Finite Elements in Analysis and Design 42 (6): 532–546. doi:10.1016/j.finel.2005.10.004.
   Web of Science ®Google Scholar
• Misch, C. E. 2004. Dental Implant Prosthetics. 2nd ed. St Louis, MO: Mosby: Elsevier. doi:10.1016/C2009-0-42440-1.
   Google Scholar
• Niroomand, M. R., and M. Arabbeiki. 2020. “Effect of the Dimensions of Implant Body and Thread on Bone Resorption and Stability in Trapezoidal Threaded Dental Implants: A Sensitivity Analysis and Optimization.” Computer Methods in Biomechanics and Biomedical Engineering 23 (13): 1005–1013. doi:10.1080/10255842.2020.1782390.
   PubMed Web of Science ®Google Scholar
• Prakash, P., and A. Narayanan. 2021. “Biomechanics in Dental Implants.” IP Annals of Prosthodontics and Restorative Dentistry 7 (3): 131–136. doi:10.18231/j.aprd.2021.028.
   Google Scholar
• Quaresma, S. E. T., P. R. Cury, W. R. Sendyk, and C. Sendyk. 2008. “A Finite Element Analysis of Two Different Dental Implants: Stress Distribution in the Prosthesis, Abutment, Implant, and Supporting Bone.” The Journal of Oral Implantology 34 (1): 1–6. doi:10.1563/1548-1336(2008)34[1:AFEAOT]2.0.CO;2.
   PubMedGoogle Scholar
• Reddy, M., R. Sundram, and H. A. E. Abdemagyd. 2019. “Application of Finite Element Model in Implant Dentistry: A Systematic Review.” Journal of Pharmacy and Bioallied Sciences 11 (Suppl 2): S85–S91. doi:10.4103/JPBS.JPBS_296_18.
   PubMedGoogle Scholar
• Shafi, A. A., M. R. A. Kadir, E. Sulaiman, N. H. A. Kasim, and N. L. A. Kassim. 2013. “The Effect of Dental Implant Materials and Thread Profiles—A Finite Element and Statistical Study.” Journal of Medical Imaging and Health Informatics 3 (4): 509–513. doi:10.1166/jmihi.2013.1199.
   Web of Science ®Google Scholar
• Simpson, T. W., T. M. Mauery, J. J. Korte, and F. Mistree. 2001. “Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design Optimization.” AIAA Journal 39 (12): 2233–2241. doi:10.2514/2.1234.
   Web of Science ®Google Scholar
• Srirekha, A., and K. Bashetty. 2010. “Infinite to Finite: An Overview of Finite Element Analysis.” Indian Journal of Dental Research 21 (3): 425–432. doi:10.4103/0970-9290.70813.
   PubMedGoogle Scholar
• Su, K. C., S. F. Chuang, E. Y. K. Ng, and C. H. Chang. 2014. “An Investigation of Dentinal Fluid Flow in Dental Pulp During Food Mastication: Simulation of Fluid–Structure Interaction.” Biomechanics and Modeling in Mechanobiology 13 (3): 527–535. doi:10.1007/s10237-013-0514-z.
   PubMed Web of Science ®Google Scholar
• Szyszkowski, A., and M. Kozakiewicz. 2019. “Effect of Implant-Abutment Connection Type on Bone Around Dental Implants in Long-Term Observation: Internal Cone versus Internal Hex.” Implant Dentistry 28 (5): 430–436. doi:10.1097/ID.0000000000000905.
   PubMed Web of Science ®Google Scholar
• Tang, C. B., S. Y. Liu, G. X. Zhou, J. H. Yu, G. D. Zhang, Y. D. Bao, and Q. J. Wang. 2012. “Nonlinear Finite Element Analysis of Three Implant–Abutment Interface Designs.” International Journal of Oral Science 4 (2): 101–108. doi:10.1038/ijos.2012.35.
   PubMed Web of Science ®Google Scholar
• Tobar‐Reyes, J., L. Andueza‐Castro, A. Jiménez‐Silva, R. Bustamante‐Plaza, and J. Carvajal‐Herrera. 2021. “Micromotion Analysis of Immediately Loaded Implants with Titanium and Cobalt-Chrome Superstructures. 3D Finite Element Analysiss.” Clinical and Experimental Dental Research 7 (4): 581–590. doi:10.1002/cre2.365.
   PubMed Web of Science ®Google Scholar
• Trisi, P., M. Berardini, A. Falco, and M. P. Vulpiani. 2015. “Effect of Implant Thread Geometry on Secondary Stability, Bone Density, and Bone-To-Implant Contact: A Biomechanical and Histological Analysis.” Implant Dentistry 24 (4): 384–391. doi:10.1097/ID.0000000000000269.
   PubMed Web of Science ®Google Scholar
• Wang, X., G. Wang, X. Zhao, Y. Feng, H. Liu, F. Li, and L. W. Zheng. 2021. “Short-Term Evaluation of Guided Bone Reconstruction with Titanium Mesh Membranes and CGF Membranes in Immediate Implantation of Anterior Maxillary Tooth.” BioMed Research International 2021: 1–9. doi:10.1155/2021/4754078.
   PubMed Web of Science ®Google Scholar
• Winter, W., D. Klein, and M. Karl. 2013. “Micromotion of Dental Implants: Basic Mechanical Considerations.” Journal of Medical Engineering 2013: 265412. doi:10.1155/2013/265412.
   PubMedGoogle Scholar