Improved method for generation of hot working process maps of metals

References

• Ali, M., F. Qayyum, S. C. Tseng, S. Guk, C. Overhagen, C. K. Chao, and U. Prahl. 2022. “Development of Hot Working Process Maps for Incompressible TRIP Steel and Zirconia Composites Using Crystal Plasticity-Based Numerical Simulations.” Metals 12 (12): 2174. doi:10.3390/met12122174.
   Web of Science ®Google Scholar
• Babu, K. A., S. Mandal, C. N. Athreya, B. Shakthipriya, and V. S. Sarma. 2017. “Hot Deformation Characteristics and Processing Map of a Phosphorous Modified Super Austenitic Stainless Steel.” Materials & Design 115: 262–275. doi:10.1016/j.matdes.2016.11.054.
   Web of Science ®Google Scholar
• Chen, Z. L., and P. Nash. 2018. “Hot Deformation Behavior and Processing Maps for a Large Marine Crankshaft S34MnV Steel.” Steel Research International 89 (3): 1700321. doi:10.1002/srin.201700321.
   Web of Science ®Google Scholar
• Guk, S., R. Kawalla, and U. Prahl. 2020. “Understanding of Processing, Microstructure and Property Correlations for Flat Rolling of Presintered TRIP-Matrix Composites.” In Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 197–222. Berlin: Springer International Publishing. doi:10.1007/978-3-030-42603-3_7.
   Google Scholar
• Guo, B. F., H. P. Ji, X. G. Liu, L. Gao, R. M. Dong, M. Jin, and Q. H. Zhang. 2012. “Research on Flow Stress During Hot Deformation Process and Processing Map for 316LN Austenitic Stainless Steel.” Journal of Materials Engineering and Performance 21 (7): 1455–1461. doi:10.1007/s11665-011-0031-0.
   Web of Science ®Google Scholar
• Ji, G. L., F. G. Li, Q. H. Li, H. Q. Li, and Z. Li. 2010. “Development and Validation of a Processing Map for Aermet100 Steel.” Materials Science and Engineering: A 527 (4–5): 1165–1171. doi:10.1016/j.msea.2009.09.062.
   Web of Science ®Google Scholar
• Kirschner, M., S. Guk, R. Kawalla, and U. Prahl. 2019. “Further Development of Process Maps for TRIP Matrix Composites During Powder Forging.” Materials Science Forum 949: 15–23. doi:10.4028/1234https://www.scientific.net/MSF.949.15.
   Google Scholar
• Kirschner, M., S. Guk, R. Kawalla, and U. Prahl. 2020. “Powder Forging of Presintered TRIP-Matrix Composites.” In Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 223–255. Berlin: Springer International Publishing. doi:10.1007/978-3-030-42603-3_8.
   Google Scholar
• Li, R. B., Y. Q. Chen, C. X. Jiang, R. L. Zhang, Y. P. Fu, T. Huang, and T. T. Chen. 2020. “Hot Deformation Behavior and Processing Maps of a 9Ni590B Steel.” Journal of Materials Engineering and Performance 29 (6): 3858–3867. doi:10.1007/s11665-020-04907-6.
   Web of Science ®Google Scholar
• Li, J., F. G. Li, and Y. Y. An. 2018. “Characterization of Hot Deformation Behavior for Pure Aluminum Using 3D Processing Maps.” High Temperature Materials and Processes 37 (9–10): 929–942. doi:10.1515/htmp-2017-0078.
   Web of Science ®Google Scholar
• Liu, Y. H., Y. Q. Ning, Z. K. Yao, and H. Z. Guo. 2014. “Hot Deformation Behavior of Ti–6.0 Al–7.0 Nb Biomedical Alloy by Using Processing Map.” Journal of Alloys and Compounds 587: 183–189. doi:10.1016/j.jallcom.2013.10.132.
   Web of Science ®Google Scholar
• Li, H. Z., H. J. Wang, Z. Li, C. M. Liu, and H. T. Liu. 2010. “Flow Behavior and Processing Map of As-Cast Mg–10Gd–4.8 Y–2Zn–0.6 Zr Alloy.” Materials Science and Engineering: A 528 (1): 154–160. doi:10.1016/j.msea.2010.08.090.
   Web of Science ®Google Scholar
• Prasad, Y. V. R. K. 2003. “Processing Maps: A Status Report.” Journal of Materials Engineering and Performance 12 (6): 638–645. doi:10.1361/105994903322692420.
   Web of Science ®Google Scholar
• Prasad, Y. V. R. K., H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan, K. A. Lark, and D. R. Barker. 1984. “Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242.” Metallurgical Transactions A 15 (10): 1883–1892. doi:10.1007/BF02664902.
   Web of Science ®Google Scholar
• Prasad, Y. V. R. K., K. P. Rao, and S. Sasidhar. 2015. Hot Working Quide: A Compendium of Processing Maps. Ohio: ASM international.
   Google Scholar
• Raj, R. 1981. “Development of a Processing Map for Use in Warm-Forming and Hot-Forming Processes.” Metallurgical Transactions A 12 (6): 1089–1097. doi:10.1007/BF02643490.
   Web of Science ®Google Scholar
• Rajamuthamilselvan, M., and S. Ramanathan. 2011. “Hot Deformation Behaviour of 7075 Alloy.” Journal of Alloys and Compounds 509 (3): 948–952. doi:10.1016/j.jallcom.2010.09.139.
   Web of Science ®Google Scholar
• Rao, K. P., Y. V. R. K. Prasad, N. Hort, and K. U. Kainer. 2008. “Hot Workability Characteristics of Cast and Homogenized Mg–3Sn–1Ca Alloy.” Journal of Materials Processing Technology 201 (1–3): 359–363. doi:10.1016/j.jmatprotec.2007.11.148.
   Web of Science ®Google Scholar
• Rao, K. P., Y. V. R. K. Prasad, and K. Suresh. 2011. “Hot Working Behavior and Processing Map of a γ-TiAl Alloy Synthesized by Powder Metallurgy.” Materials & Design 32 (10): 4874–4881. doi:10.1016/j.matdes.2011.06.003.
   Web of Science ®Google Scholar
• Springer, P., and U. Prahl. 2016. “Characterisation of Mechanical Behavior of 18CrNiMo7-6 Steel with and without Nb Under Warm Forging Conditions Through Processing Maps Analysis.” Journal of Materials Processing Technology 237: 216–234. doi:10.1016/j.jmatprotec.2016.05.021.
   Web of Science ®Google Scholar
• Sun, Y., X. Y. Feng, L. X. Hu, H. Zhang, and H. Z. Zhang. 2018. “Characterization on Hot Deformation Behavior of Ti-22Al-25Nb Alloy Using a Combination of 3D Processing Maps and Finite Element Simulation Method.” Journal of Alloys and Compounds 753: 256–271. doi:10.1016/j.jallcom.2018.04.225.
   Web of Science ®Google Scholar
• Tseng, S. C., C. K. Chao, F. M. Chen, and W. C. Chiu. 2020. “Interfacial Stresses of a Coated Polygonal Hole Subject to a Point Heat Source.” Journal of Thermal Stresses 43 (12): 1487–1512. doi:10.1080/01495739.2020.1812458.
   Web of Science ®Google Scholar
• Tseng, S. C., C. K. Chao, and J. Y. Guo. 2021. “Failure Analysis of a Polygonal Void with an Oxide Layer in a Cracked Matrix.” International Journal of Applied Mechanics 13 (9): 2150099. doi:10.1142/S175882512150099X.
   Web of Science ®Google Scholar
• Wray, P. J. 1969. “Strain‐Rate Dependence of the Tensile Failure of a Polycrystalline Material at Elevated Temperatures.” Journal of Applied Physics 40 (10): 4018–4029. doi:10.1063/1.1657137.
   Web of Science ®Google Scholar
• Wu, R. H., Y. Liu, C. Geng, Q. Q. Lin, Y. F. Xiao, J. R. Xu, and W. Kang. 2017. “Study on Hot Deformation Behavior and Intrinsic Workability of 6063 Aluminum Alloys Using 3D Processing Map.” Journal of Alloys and Compounds 713: 212–221. doi:10.1016/j.jallcom.2017.04.156.
   Web of Science ®Google Scholar
• Xu, Y., L. X. Hu, and Y. Sun. 2013. “Processing Map and Kinetic Analysis for Hot Deformation of an As-Cast AZ91D Magnesium Alloy.” Materials Science and Engineering: A 578: 402–407. doi:10.1016/j.msea.2013.04.110.
   Web of Science ®Google Scholar
• Ziegler, H. 1963. “Progress in Solid Mechanics.” Ed. Sneddon, in Y Hill, R., Nueva York (EE. UU.) 4.
   Google Scholar