References
- D.H. Abney, C.T. Kello, and R. Balasubramaniam, Introduction and application of the multiscale coefficient of variation analysis. Behav. Res. Method 49 (2017), pp. 1571–1581. doi:https://doi.org/10.3758/s13428-016-0803-4.
- A. Amdouni, P. Castagliola, H. Taleb, and G. Celano, One-sided run rules control charts for monitoring the coefficient of variation in short production runs. Eur. J. Ind. Eng. 10 (2016), pp. 639–663. doi:https://doi.org/10.1504/EJIE.2016.078804.
- D.L. Antzoulakos, and A.C. Rakitzis, Runs rules schemes for monitoring process variability. J. Appl. Stat. 37 (2010), pp. 1231–1247. doi:https://doi.org/10.1080/02664760903002683.
- M.E. Calzada, and S.M. Scariano, A synthetic control chart for the coefficient of variation. J. Stat. Comput. Sim. 83 (2013), pp. 853–867. doi:https://doi.org/10.1080/00949655.2011.639772.
- P. Castagliola, A. Achouri, H. Taleb, G. Celano, and S. Psarakis, Monitoring the coefficient of variation using control charts with runs rules. Qual. Technol. Quant. M. 10 (2013), pp. 75–94. doi:https://doi.org/10.1080/16843703.2013.11673309.
- P. Castagliola, G. Celano, and S. Psarakis, Monitoring the coefficient of variation using EWMA charts. J. Qual. Technol. 43 (2011), pp. 249–265. doi:https://doi.org/10.1080/00224065.2011.11917861.
- P. Castagliola, K.P. Tran, G. Celano, A.C. Rakitzis, and P.E. Maravelakis, An EWMA-type sign chart with exact run length properties. J. Qual. Technol. 51 (2019), pp. 51–63. doi:https://doi.org/10.1080/00224065.2018.1545497.
- C.W. Champ, and W.H. Woodall, Exact results for the Shewhart control chart with supplementary run rules. Technometrics 29 (1987), pp. 393–399. doi:https://doi.org/10.1080/00401706.1987.10488266.
- C. Cheng, and P. Chen, An ARL-unbiased design of time-between-events control charts with runs rules. J. Stat. Comput. Sim. 81 (2011), pp. 857–871. doi:https://doi.org/10.1080/00949650903520944.
- Z.L. Chong, M.B.C. Khoo, W.L. Teoh, H.W. You, and P. Castagliola, Optimal design of the side-sensitive modified group runs (SSMGR) X¯ chart when process parameters are estimated. Qual. Reliab. Eng. Int. 35 (2019), pp. 246–262. doi:https://doi.org/10.1002/qre.2395.
- R.B. Dull, and D.P. Tegarden, Using control charts to monitor financial reporting of public companies. Int. J. Account. Inf. Sy. 5 (2004), pp. 109–127. doi:https://doi.org/10.1016/j.accinf.2004.01.004.
- E.P. Hong, C.W. Kang, J.W. Baek, and H.W. Kang, Development of CV control chart using EWMA technique. J. S. Korea. Ind. Syst. Eng. 31 (2008), pp. 114–120. Available at http://www.ksie.ne.kr/journal/article.php?code=4766.
- C.W. Kang, M.S. Lee, Y.J. Seong, and D.M. Hawkins, A control chart for the coefficient of variation. J. Qual. Technol. 39 (2007), pp. 151–158. doi:https://doi.org/10.1080/00224065.2007.11917682.
- K.W. Khaw, X.Y. Chew, W.C. Yeong, and S.L. Lim, Optimal design of the synthetic control chart for monitoring the multivariate coefficient of variation. Chemometr. Intell. Lab. 186 (2019), pp. 33–40. doi:https://doi.org/10.1016/j.chemolab.2019.02.001.
- G. Latouche, and V. Ramaswami, Introduction to Matrix Analytic Methods in Stochastic Modelling, Series on Statistics and Applied Probability, SIAM, Philadelphia, 1999.
- M.H. Lee, and M.B.C. Khoo, Economic-statistical design of synthetic max chart. Qual. Technol. Quant. M. 15 (2018), pp. 301–327. doi:https://doi.org/10.1080/16843703.2016.1208492.
- A.J.X. Lim, M.B.C. Khoo, W.L. Teoh, and A. Haq, Run sum chart for monitoring multivariate coefficient of variation. Comput. Ind. Eng. 109 (2017), pp. 84–95. doi:https://doi.org/10.1016/j.cie.2017.04.023.
- C.A. Melvin, Applications of control charts to an educational system. Perf. Im. Quart. 6 (1993), pp. 74–85. doi:https://doi.org/10.1111/j.1937-8327.1993.tb00597.x.
- D.C. Montgomery, Introduction to Statistical Quality Control, 6th ed., John Wiley & Sons, New York, 2009.
- A.N.B. Muhammad, W.C. Yeong, Z.L. Chong, S.L. Lim, and M.B.C. Khoo, Monitoring the coefficient of variation using a variable sample size EWMA chart. Comput. Ind. Eng. 126 (2018), pp. 378–398. doi:https://doi.org/10.1016/j.cie.2018.09.045.
- M.F. Neuts, Matrix-geometric Solutions in Stochastic Models: An Algorithmic Approach, Johns Hopkins University Press, Baltimore, 1981.
- E.S. Page, Control charts with warning lines. Biometrika 42 (1955), pp. 243–257. Available at https://www.jstor.org/stable/2333440. doi: https://doi.org/10.1093/biomet/42.1-2.243
- A.C. Rakitzis, Monitoring exponential data using two-sided control charts with runs rules. J. Stat. Comput. Sim. 86 (2016), pp. 149–159. doi:https://doi.org/10.1080/00949655.2014.998219.
- S.W. Roberts, Properties of control chart zone tests. Bell. Syst. Tech. J. 37 (1958), pp. 83–114. doi:https://doi.org/10.1002/j.1538-7305.1958.tb03870.x.
- F.L. Romano, G.M.B. Ambrosano, M.B.B.A. Magnani, and D.F. Nouer, Analysis of the coefficient of variation in shear and tensile bond strength tests. J. Appl. Oral Sci. 13 (2005), pp. 243–246. doi:https://doi.org/10.1590/S1678-77572005000300008.
- O. Shechtman, The coefficient of variation as an index of measurement reliability, in Methods of Clinical Epidemiology, S.A.R. Doi and G.M. Williams, eds., Springer, Berlin, 2013. pp. 39–49.
- D.K. Shepherd, S.E. Rigdon, and C.W. Champ, Using runs rules to monitor an attribute chart for Markov process. Qual. Technol. Quant. M. 9 (2012), pp. 383–406. doi:https://doi.org/10.1080/16843703.2012.11673300.
- J.N. Siddall, Probabilistic Engineering Design-Principles and Applications, Marcel Dekker, New York, 1983.
- R. Tennant, M.A. Mohammed, J.J. Coleman, and U. Martin, Monitoring patients using control charts: A systematic review. Int. J. Qual. Health C. 19 (2007), pp. 187–194. doi:https://doi.org/10.1093/intqhc/mzm015.
- W.L. Teoh, M.B.C. Khoo, P. Castagliola, W.C. Yeong, and S.Y. Teh, Run-sum control charts for monitoring the coefficient of variation. Eur. J. Oper. Res. 257 (2017), pp. 144–158. doi:https://doi.org/10.1016/j.ejor.2016.08.067.
- K.P. Tran, Designing of run rules t control charts for monitoring changes in the process mean. Chemometr. Intell. Lab. 174 (2018), pp. 85–93. doi:https://doi.org/10.1016/j.chemolab.2018.01.009.
- K.P. Tran, The efficiency of the 4-out-of-5 runs rules scheme for monitoring the ratio of population means of a bivariate normal distribution. Int. J. Reliab. Qual. Saf. Eng. 23 (2016), pp. 1–26. doi:https://doi.org/10.1142/S0218539316500200.
- K.P. Tran, Run rules median control charts for monitoring process mean in manufacturing. Qual. Reliab. Eng. Int. 33 (2017), pp. 2437–2450. doi:https://doi.org/10.1002/qre.2201.
- K.P. Tran, P. Castagliola, and G. Celano, Monitoring the ratio of two normal variables using run rules type control charts. Int. J. Prod. Res. 54 (2016), pp. 1670–1688. doi:https://doi.org/10.1080/00207543.2015.1047982.
- P.H. Tran, and K.P. Tran, The efficiency of CUSUM schemes for monitoring the coefficient of variation. Appl. Stoch. Model Bus. 32 (2016), pp. 870–881. doi:https://doi.org/10.1002/asmb.2213.
- V.G. Voinov, and M.S. Nikulin, Unbiased Estimator and Their Applications, Multivariate Case, Vol. 2, Kluwer, Dordrecht, 1996.
- Western-Electric, Statistical Quality Control Handbook, Western Electric Co, Indianapolis, 1956.
- J. Ye, P. Feng, C. Xu, Y. Ma, and S. Huang, A novel approach for chatter online monitoring using coefficient of variation in machining process. Int. J. Adv. Manuf. Technol. 96 (2018), pp. 287–297. doi:https://doi.org/10.1007/s00170-017-1544-y.
- W.C. Yeong, M.B.C. Khoo, W.L. Teoh, and P. Castagliola, A control chart for the multivariate coefficient of variation. Qual. Reliab. Eng. Int. 32 (2016), pp. 1213–1225. doi:https://doi.org/10.1002/qre.1828.
- W.C. Yeong, S.L. Lim, M.B.C. Khoo, and P. Castagliola, Monitoring the coefficient of variation using a variable parameters chart. Qual. Eng. 30 (2018), pp. 212–235. doi:https://doi.org/10.1080/08982112.2017.1310230.
- H.W. You, M.B.C. Khoo, P. Castagliola, and A. Haq, Monitoring the coefficient of variation using the side sensitive group runs chart. Qual. Reliab. Eng. Int. 32 (2016), pp. 1913–1927. doi:https://doi.org/10.1002/qre.1922.