76
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Phase II control charts for monitoring the depth-ratio of ball-bearings involving three normal variables

ORCID Icon, ORCID Icon, &
Received 02 May 2023, Accepted 30 Oct 2023, Published online: 08 Nov 2023

References

  • S.S. Abubakar, M.B.C. Khoo, S. Saha, and W.L. Teoh, Run sum control chart for monitoring the ratio of population means of a bivariate normal distribution, Commun. Stat. Theory Methods 51 (2020), pp. 1–30.
  • O.A. Adeoti, J.C. Malela-Majika, S.C. Shongwe, and M. Aslam, A homogeneously weighted moving average control chart for conway–maxwell poisson distribution, J. Appl. Stat. 49 (2022), pp. 3090–3119.
  • V. Alevizakos, K. Chatterjee, and C. Koukouvinos, Distribution-free phase ii triple ewma control chart for joint monitoring the process location and scale parameters, J. Appl. Stat. (2023), pp. 1–20.
  • T.W. Anderson, An Introduction to Multivariate Statistical Analysis, 3rd ed., Wiley, New York, 2003.
  • D. Brook and D.A. Evans, An approach to the probability distribution of cusum run length, Biometrika 59 (1972), pp. 539–549.
  • A. Cedilnik, K. Košmelj, and A. Blejec, The distribution of the ratio of jointly normal variables, Metod. Zv. 1 (2004), pp. 99–108.
  • G. Celano, P. Castagliola, A. Faraz, and S. Fichera, Statistical performance of a control chart for individual observations monitoring the ratio of two normal variables, Qual. Reliab. Eng. 30 (2014), pp. 1361–1377.
  • G. Celano and P. Castagliola, A synthetic control chart for monitoring the ratio of two normal variables, Qual. Reliab. Eng. Int. 32 (2016), pp. 681–696.
  • G. Celano and P. Castagliola, Design of a phase II control chart for monitoring the ratio of two normal variables, Qual. Reliab. Eng. Int. 32 (2016), pp. 291–308.
  • S. Chatterjee and P. Qiu, Distribution-free cumulative sum control charts using bootstrap-based control limits, Ann. Appl. Stat. 3 (2009), pp. 349–369.
  • H. Du Nguyen and K. Phuc Tran, Effect of the measurement errors on two one-sided Shewhart control charts for monitoring the ratio of two normal variables, Qual. Reliab. Eng. Int. 36 (2020), pp. 1731–1750.
  • P. Erto, A. Lepore, B. Palumbo, and A. Vanacore, A bayesian control chart for monitoring the ratio of Weibull percentiles, Qual. Reliab. Eng. Int. 35 (2019), pp. 1460–1475.
  • F. Gan, Designs of one-and two-sided exponential EWMA charts, J. Qual. Technol. 30 (1998), pp. 55–69.
  • R.C. Geary, The frequency distribution of the quotient of two normal variates, J. R. Stat. Soc. 93 (1930), pp. 442–446.
  • D. Han, F. Tsung, and L. Qiao, The optimal cusum control chart with a dynamic non-random control limit and a given sampling strategy for small samples sequence, J. Appl. Stat. (2023), pp. 1–17.
  • A. Haq, Weighted adaptive multivariate cusum control charts, Qual. Reliab. Eng. Int. 34 (2018), pp. 939–952.
  • J. Hayya, D. Armstrong, and N. Gressis, A note on the ratio of two normally distributed variables, Manage. Sci. 21 (1975), pp. 1338–1341.
  • D.V. Hinkley, On the ratio of two correlated normal random variables, Biometrika 56 (1969), pp. 635–639.
  • M. Imran, J. Sun, X. Hu, F.S. Zaidi, and A. Tang, Investigating zero-state and steady-state performance of mewma-coda control chart using variable sampling interval, J. Appl. Stat. (2023), pp. 1–22.
  • K.W. Khaw, M.B. Khoo, P. Castagliola, and M. Rahim, New adaptive control charts for monitoring the multivariate coefficient of variation, Comput. Ind. Eng. 126 (2018), pp. 595–610.
  • H. Khusna, M. Mashuri, M. Ahsan, S. Suhartono, and D.D. Prastyo, Bootstrap-based maximum multivariate cusum control chart, Qual. Technol. Quant. Manag. 17 (2020), pp. 52–74.
  • J.K. Kulski, S. Suzuki, Y. Ozaki, S. Mitsunaga, H. Inoko, and T. Shiina, In phase HLA genotyping by next generation sequencing-a comparison between two massively parallel sequencing bench-top systems, the roche GS junior and ion torrent PGM, in HLA and Associated Important Diseases, Intech, Croatia, 2014, pp. 141–81.
  • C. Li, A. Mukherjee, and Q. Su, A distribution-free phase i monitoring scheme for subgroup location and scale based on the multi-sample lepage statistic, Comput. Ind. Eng. 129 (2019), pp. 259–273.
  • G. Marsaglia, Ratios of normal variables and ratios of sums of uniform variables, J. Am. Stat. Assoc. 60 (1965), pp. 193–204.
  • S. Nadarajah and I. Okorie, A note on ‘monitoring the ratio of two normal variables using variable sampling interval exponentially weighted moving average control charts’, Qual. Reliab. Eng. Int. 36 (2020), pp. 1849–1854.
  • K. Nakamura, Process for preparing pre-expanded particles of thermoplastic, (1989). Available at http://www.tp-ontrol.hu/index.php/TP_Toolbox.
  • H.D. Nguyen, K.P. Tran, and C. Heuchenne, Monitoring the ratio of two normal variables using variable sampling interval exponentially weighted moving average control charts, Qual. Reliab. Eng. Int. 35 (2019), pp. 439–460.
  • H.D. Nguyen, K.P. Tran, and H.L. Heuchenne, CUSUM control charts with variable sampling interval for monitoring the ratio of two normal variables, Qual. Reliab. Eng. Int. 36 (2020), pp. 474–497.
  • H. Nguyen, K. Tran, and K. Tran, The effect of measurement errors on the performance of the exponentially weighted moving average control charts for the ratio of two normally distributed variables, Eur. J. Oper. Res. 293 (2020), pp. 203–218.
  • H.D. Nguyen, A.A. Nadi, K.D. Tran, P. Castagliola, G. Celano, and K.P. Tran, The shewhart-type rz control chart for monitoring the ratio of autocorrelated variables, Int. J. Prod. Res. 61 (2023), pp. 1–26.
  • D. Öksoy, E. Boulos, and L.D. Pye, Statistical process control by the quotient of two correlated normal variables, Qual. Eng. 6 (1993), pp. 179–194.
  • P. Qiu, Introduction to Statistical Process Control, CRC press, Boca Raton, FL, 2014.
  • K.F. Sarsam, T.S. AL-Attar, and M.M. Al-Saqi, Effect of height to diameter ratio on the behavior of high performance concrete specimen with different shapes under compression load, Eng. Technol. J. 32 (2014), pp. 2734–2744.
  • T. Shiina, S. Suzuki, Y. Ozaki, H. Taira, E. Kikkawa, A. Shigenari, A. Oka, T. Umemura, S. Joshita, O. Takahashi, Y. Hayashi, M. Paumen, Y. Katsuyama, S. Mitsunaga, M. Ota, J.K. Kulski, and H. Inoko, Super high resolution for single molecule-sequence-based typing of classical hla loci at the 8-digit level using next generation sequencers, Tissue Antigens 80 (2012), pp. 305–316.
  • A.W. Spisak, A control chart for ratios, J. Qual. Technol. 22 (1990), pp. 34–37.
  • M. Sultana, M.J. Rahman, and M. Bashar, Size distribution of hexagonal prismatic-shaped zno nanorods synthesized by microwave-assisted irradiation of precursors, J. Electron. Mater. 51 (2022), pp. 2682–2691.
  • K. Tran, P. Castagliola, and G. Celano, Monitoring the ratio of population means of a bivariate normal distribution using CUSUM type control charts, Stat. Pap. 59 (2016), pp. 387–413.
  • K. Tran, P. Castagliola, and G. Celano, Monitoring the ratio of two normal variables using EWMA type control charts, Qual. Reliab. Eng. Int. 32 (2016), pp. 1853–1869.
  • K. Tran, P. Castagliola, and G. Celano, Monitoring the ratio of two normal variables using run rules type control charts, Int. J. Prod. Res. 54 (2016), pp. 1670–1688.
  • K. Tran, P. Castagliola, and G. Celano, The performance of the Shewhart-RZ control chart in the presence of measurement error, Int. J. Prod. Res. 54 (2016), pp. 7504–7522.
  • K.P. Tran and S. Knoth, Steady-state arl analysis of arl-unbiased EWMA-RZ control chart monitoring the ratio of two normal variables, Qual. Reliab. Eng. Int. 34 (2018), pp. 377–390.
  • Q. Wang, T. Hu, G. Chen, and Q. Jiang, Bending instability characteristics of double-walled carbon nanotubes, Phys. Rev. B 71 (2005), pp. 045403.
  • T. Yamauchi and L. Lee Ho, Control charts for monitoring the ratio of two poisson rates, Qual. Reliab. Eng. Int. 36 (2019), pp. 214–230.
  • J. Zhang, Z. Li, B. Chen, and Z. Wang, A new exponentially weighted moving average control chart for monitoring the coefficient of variation, Comput. Ind. Eng. 78 (2014), pp. 205–212.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.