Microstructure and mechanical properties of aluminium/steel dissimilar weldments: effect of heat input

References

• E. Schuber, M. Klassen, I. Zerner, C. Walz and G. Sepold: ‘Light-weight structures produced by laser beam joining for future applications in automobile and aerospace industry’, J. Mater. Process. Technol., 2001, 115, 2–8. doi: 10.1016/S0924-0136(01)00756-7
   Web of Science ®Google Scholar
• J. L. Song, S. B. Lin, C. L. Yang, G. C. Ma and H. Liu: ‘Spreading behavior and microstructure characteristics of dissimilar metals TIG welding–brazing of aluminum alloy to stainless steel’, Mater. Sci. Eng. A, 2009, 509, 31–40. doi: 10.1016/j.msea.2009.02.036
   Web of Science ®Google Scholar
• M. Yasuyama, K. Ogawa and T. Taka: ‘Spot welding of aluminium and steel sheet with an insert of aluminium clad steel sheet: Dissimilar metal joining of aluminium and steel sheet (1st Report)’, Weld. Int., 1996, 10, 965–970. doi: 10.1080/09507119609549121
   Google Scholar
• J. Vrenken, C. Goos, T. van der Veldt and W. Braunschweig: ‘Fluxless laser brazing of aluminium to steel’, Joining in Automotive Engineering 2009.
   Google Scholar
• P. Liu, Y. Li, J. Wang and J. Guo: ‘Vacuum brazing technology and microstructure near the interface of Al/18-8 stainless steel’, Mater. Res. Bull., 2003, 38, 1493–1499. doi: 10.1016/S0025-5408(03)00176-4
   Web of Science ®Google Scholar
• J. Tsujino, K. Hidai, A. Hasegawa, R. Kanai, H. Matsuura, K. Matsushima and T. Ueoka: ‘Ultrasonic butt welding of aluminum, aluminum alloy and stainless steel plate specimens’, Ultrasonics, 2002, 40, 371–374. doi: 10.1016/S0041-624X(02)00124-5
   PubMed Web of Science ®Google Scholar
• J. Tsujino, T. Ueoka, T. Kashino and F. Sugahara: ‘Ultrasonic butt welding of aluminum and stainless steel specimens using a 15 kHz welding system’, Jpn. J. Appl. Phys., 1999, 38, 4254–4255. doi: 10.1143/JJAP.38.4254
   Web of Science ®Google Scholar
• S. D. Kore, P. P. Date and S. V. Kulkarni: ‘Electromagnetic impact welding of aluminum to stainless steel sheets’, J. Mater. Process. Technol., 2008, 208, 486–493. doi: 10.1016/j.jmatprotec.2008.01.039
   Web of Science ®Google Scholar
• H. Springer, A. Kostka, J. F. dos Santos and D. Raabe: ‘Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys’, Mater. Sci. Eng. A, 2011, 528, 4630–4642. doi: 10.1016/j.msea.2011.02.057
   Web of Science ®Google Scholar
• D. Travessa, M. Ferrante and G. den Ouden: ‘Diffusion bonding of aluminium oxide to stainless steel using stress relief interlayers’, Mater. Sci. Eng. A, 2002, 337, 287–296. doi: 10.1016/S0921-5093(02)00046-1
   Web of Science ®Google Scholar
• M. Kreimeyer and G. Sepold: ‘Laser steel joined aluminium-hybrid structures. Proceedings of ICALEO'02, Jacksonville, USA, 2002.
   Google Scholar
• T. Tanaka, T. Morishige and T. Hirata: ‘Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys’, Scripta Mater., 2009, 61, 756–759. doi: 10.1016/j.scriptamat.2009.06.022
   Web of Science ®Google Scholar
• J. Bruckner: ‘Arc joining of steel with aluminium’, Paton Weld. J., 2003, 10–11, 180–182.
   Web of Science ®Google Scholar
• A. Mathieu, R. Shabadi, A. Deschamps, M. Suery, S. Mattei, D. Revey and E. Cicala: ‘Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)’, Opt. Laser Technol., 2007, 39, 652–661. doi: 10.1016/j.optlastec.2005.08.014
   Web of Science ®Google Scholar
• Y. Zhang, Y. Liu, Y. Han, C. Wei and Z. Gao: ‘The role of cooling rate in the microstructure of Al–Fe–Si alloy with high Fe and Si contents’, J. Alloys Compd., 2009, 473, 442–445. doi: 10.1016/j.jallcom.2008.06.004
   Web of Science ®Google Scholar
• L. A. Jacome, S. Weber, A. Leitner, E. Arenholz, J. Bruckner, H. Hackl and A. R. Pyzalla: ‘Influence of filler composition on the microstructure and mechanical properties of steel aluminum joints produced by metal arc joining’, Adv. Eng. Mater., 2009, 11, 350–358. doi: 10.1002/adem.200800319
   Web of Science ®Google Scholar
• Y. Kim, K. Park, Y. Kim and S. Kim: ‘Dissimilar metal joining of steel to uminum using the arc heat Source’, Mater. Sci. Forum, 2012, 706–709, 2974–2979. doi: 10.4028/www.scientific.net/MSF.706-709.2974
   Google Scholar
• P. J. Withers and H. K. D. H. Bhadeshia: ‘Residual stress. Part 1 – measurement techniques’, Mater. Sci. Technol., 2001, 17, 355–365. doi: 10.1179/026708301101509980
   Web of Science ®Google Scholar
• P. J. Withers and H. K. D. H. Bhadeshia: ‘Residual stress. Part 2 nature and origins’, Mater. Sci. Technol., 2001, 17, 366–375. doi: 10.1179/026708301101510087
   Web of Science ®Google Scholar
• M. Xu, J. Chen, Y. Jin, Y. Li and H. Lu: ‘Effects of weld metal strength and transformation temperature on welding residual stress’, Sci. Technol. Weld. Join., 2015, 20, 208–215. doi: 10.1179/1362171814Y.0000000274
   Web of Science ®Google Scholar
• P. Sedek, J. Brozda, L. Wang and P. J. Withers: ‘Residual stress relief in MAG welded joints of dissimilar steels’, Int. J. Pres. Ves. Pip., 2003, 80, 705–713. doi: 10.1016/j.ijpvp.2003.08.004
   Web of Science ®Google Scholar
• S. K. Khanna, X. Long, W. D. Porter, H. Wang, C. K. Liu, M. Radovic and E. L. Curzio: ‘Residual stresses in spot welded new generation aluminium alloys Part A—thermophysical and thermomechanical properties of 6111 and 5754 aluminium alloys’, Sci. Technol. Weld. Join., 2005, 10, 82–87. doi: 10.1179/174329305X29474
   Web of Science ®Google Scholar
• X. Long and S. K. Khanna: ‘Residual stresses in spot welded new generation aluminium alloys Part B—finite element simulation of residual stresses in a spot weld in 5754 aluminium alloy’, Sci. Technol. Weld. Join., 2005, 10, 88–94. doi: 10.1179/174329305X29483
   Web of Science ®Google Scholar
• W. Woo and H. Choo: ‘Softening behaviour of friction stir welded Al 6061-T6 and Mg AZ31B alloys’, Sci. Technol. Weld. Join., 2011, 16, 267–272. doi: 10.1179/1362171811Y.0000000016
   Web of Science ®Google Scholar
• A. De and T. Deb Roy: ‘A perspective on residual stresses in welding’, Sci. Technol. Weld. Join., 2011, 16, 204–208. doi: 10.1179/136217111X12978476537783
   Web of Science ®Google Scholar
• V. Guillaumin and G. Mankowski: ‘Localized corrosion of 6056 T6 aluminium alloy in chloride media’, Corros Sci., 2000, 42, 105–125. doi: 10.1016/S0010-938X(99)00053-0
   Web of Science ®Google Scholar
• W. Y. Maeng, Y. H. Kang, T. W. Nam, S. Ohashi and T. Ishihara: ‘Synergistic interaction of fatigue and stress corrosion on the corrosion fatigue crack growth behavior in Alloy 600 in high temperature and high pressure water’, J. Nucl. Mater., 1999, 275, 194–200. doi: 10.1016/S0022-3115(99)00114-2
   Web of Science ®Google Scholar
• A. C. Munoz, G. Ruckert, B. Huneau, X. Sauvage and S. Marya: ‘Comparison of TIG welded and friction stir welded Al–4.5Mg–0.26Sc alloy’, J. Mater. Process. Technol., 2008, 197, 337–343. doi: 10.1016/j.jmatprotec.2007.06.035
   Web of Science ®Google Scholar
• K. H. Li, J. S. Chen and Y. M. Zhang: ‘Double-electrode GMAW process and control’, Weld. J., 2007, 86, (8), 231–237.
   Web of Science ®Google Scholar
• K. H. Li and Y. M. Zhang: ‘Consumable double-electrode GMAW—part 1: the process’, Weld. J., 2008, 87, (1), 11–17.
   Web of Science ®Google Scholar
• K. H. Li and Y. M. Zhang: ‘Consumable double-electrode GMAW part II: monitoring, modeling, and control’, Weld. J., 2008, 87, (2), 44–50. doi: 10.1179/174329307X249360
   Web of Science ®Google Scholar
• K. H. Li, Y. M. Zhang and P. Xu: ‘High-strength steel welding with consumable double-electrode gas metal arc welding’, Weld. J., 2008, 87, (3), 57–64.
   Web of Science ®Google Scholar
• Y. Shi, G. Zhang and Y. Huang: ‘Pulsed double-electrode GMAW-brazing for joining of aluminum to steel’, Weld. J., 2014, 93, (6), 216–224.
   Web of Science ®Google Scholar
• R. Pretorius, A. M. Vredenberg, F. W. Saris and R. de Reus: ‘Prediction of phase formation sequence and phase stability in binary metal-aluminum thin-film systems using the effective heat of formation rule’, J. Appl. Phys., 1991, 70, 3636–3646. doi: 10.1063/1.349211
   Web of Science ®Google Scholar