Evaluation of crystallographic changes and plastic strain ratio in Al alloys

References

• L. Delannay, P. J. Jacques and S. R. Kalidindi: ‘Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons’, Int. J. Plast., 2006, 22, 1879–1898. doi: 10.1016/j.ijplas.2006.01.008
   Web of Science ®Google Scholar
• O. Diard, S. Leclercq, G. Rousselier and G. Cailletaud: ‘Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries’, Int. J. Plast., 2005, 21, 691–722. doi: 10.1016/j.ijplas.2004.05.017
   Web of Science ®Google Scholar
• F. Roters, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T. R. Bieler and D. Raabe: ‘Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications’, Acta Mater., 2010, 58, 1152–1211. doi: 10.1016/j.actamat.2009.10.058
   Web of Science ®Google Scholar
• P. R. Dawson, D. E. Boyce and R. Rogge: ‘Issues in modeling heterogeneous deformations in polycrystalline metals using multiscale approaches’, Comput. Model. Eng. Sci., 2005, 10, 123–141.
   Web of Science ®Google Scholar
• R. A. Lebensohn, A. K. Kanjarla and P. Eisenlohr: ‘An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials’, Int. J. Plast., 2012, 32–33, 59–69. doi: 10.1016/j.ijplas.2011.12.005
   Web of Science ®Google Scholar
• R. A. Lebensohn, A. Rollet and P. Suquet: ‘Fast Fourier transform-based modeling for the determination of micromechanical fields in polycrystals’, JOM, 2011, 63, 13–18. doi: 10.1007/s11837-011-0037-y
   Web of Science ®Google Scholar
• P. Van Houtte and E. Aernoudt: ‘Solution of the generalized Taylor theory of plastic flow’, Z. Metallkunde, 1975, 66, 202–209.
   Google Scholar
• P. VanHoutte, S. Li, M. Seefeldt and L. Delannay: ‘Deformation texture prediction: from the Taylor model to the advanced Lamel model’, Int. J. Plast., 2005, 21, 589–624. doi: 10.1016/j.ijplas.2004.04.011
   Web of Science ®Google Scholar
• P. Van Houtte, A. K. Kanjarla, A. Van Bael, M. Seefeldt and L. Delannay: ‘Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials’, Eur. J. Mech. A/Solids, 2006, 25, 634–648. doi: 10.1016/j.euromechsol.2006.05.003
   Web of Science ®Google Scholar
• R. A. Lebensohn and C. N. Tomé: ‘A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys’, Acta Metall. Mater., 1993, 41, 2611–2624. doi: 10.1016/0956-7151(93)90130-K
   Google Scholar
• M. Crumbach, G. Pomana, P. Wagner and G. Gottstein: ‘A Taylor type deformation texture model considering grain interaction and material properties. Part I – Fundamentals’ in ‘Proceedings of the recrystallization and grain growth conference’, (eds. G. Gottstein and D. A. Molodov), Vol. 2, 1053–1067; 2001, Aachen, Germany, Springer.
   Google Scholar
• Q. Xie, A. Van Bael, J. Sidor, J. Moerman and P. Van Houtte: ‘A new cluster-type model for the simulation of textures of polycrystalline metals’, Acta Mater., 2014, 69, 175–186. doi: 10.1016/j.actamat.2014.01.038
   Web of Science ®Google Scholar
• J. J. Jonas and L. S. Tóth: ‘Modelling oriented nucleation and selective growth during dynamic recrystallization’, Scr. Metall. Mater., 1992, 27, 1575–1580. doi: 10.1016/0956-716X(92)90147-7
   Google Scholar
• H. E. Vatne, T. Furu, R. Øsrund and E. Nes: ‘Modelling recrystallization after hot deformation of aluminium’, Acta Mater., 1996, 44, 4463–4473. doi: 10.1016/1359-6454(96)00078-X
   Web of Science ®Google Scholar
• O. Engler: ‘Simulation of the recrystallization textures of Al-alloys on the basis of nucleation and growth probability of the various textures components’, Textures Microstruct., 1997, 28, 197–209. doi: 10.1155/TSM.28.197
   Google Scholar
• L. Kestens and J. J. Jonas: ‘Modeling texture change during the static recrystallization of interstitial free steels’, Metall. Mater. Trans. A, 1996, 27, 155–164. doi: 10.1007/BF02647756
   Web of Science ®Google Scholar
• N. Rajmohan and J. A. Szpunar: ‘A new model for recrystallization of heavily cold-rolled aluminum using orientation-dependent stored energy’, Acta Mater., 2000, 48, 3327–3340. doi: 10.1016/S1359-6454(00)00154-3
   Web of Science ®Google Scholar
• J. J. Sidor, K. Decroos, R. H. Petrov and L. A. I. Kestens: ‘Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: experimental study and modeling’, Int. J. Plast., 2015, 66, 119–137. doi: 10.1016/j.ijplas.2014.08.009
   Web of Science ®Google Scholar
• J. J. Sidor, R. H. Petrov and L. A. I. Kestens: ‘Modeling the crystallographic texture changes in aluminum alloys during recrystallization’, Acta Mater., 2011, 59, 5735–5748. doi: 10.1016/j.actamat.2011.05.050
   Web of Science ®Google Scholar
• B. Hutchinson: ‘Critical assessment 16: anisotropy in metals’, Mater. Sci. Technol., 2015, 31, 1393–1401. doi: 10.1179/1743284715Y.0000000118
   Web of Science ®Google Scholar
• P. Van Houtte: ‘MTM-FHM Software’, 2nd edn, 1995, Leuven, MTM-KU.
   Google Scholar
• L. S. Tóth and P. Van Houtte: ‘Discretization techniques for orientation distribution functions’, Textures Microstruct., 1992, 19, 229–244. doi: 10.1155/TSM.19.229
   Google Scholar
• J. J. Sidor and L. A. I. Kestens: ‘Analytical description of rolling textures in face-centred-cubic metals’, Scr. Mater., 2013, 68, 273–276. doi: 10.1016/j.scriptamat.2012.10.039
   Web of Science ®Google Scholar
• C. Liu, P. Hartley, C. E. N. Sturgess and G. W. Rowe: ‘Elastic–plastic finite-element modelling of cold rolling of strip’, Int. J. Mech. Sci., 1985, 27, 531–541. doi: 10.1016/0020-7403(85)90043-8
   Web of Science ®Google Scholar
• Z. Y. Jiang and A. K. Tieu: ‘Elastic–plastic finite element method simulation of thin strip with tension in cold rolling’, J. Mater. Process. Technol., 2002, 130–131, 511–515. doi: 10.1016/S0924-0136(02)01020-8
   Web of Science ®Google Scholar
• J. D. Lee: ‘A large-strain elastic–plastic finite element analysis of rolling process’, Comput. Meth. Appl. Mech. Eng., 1998, 161, 315–347. doi: 10.1016/S0045-7825(97)00324-1
   Web of Science ®Google Scholar
• A. Aanestad: ‘Simulation of cold rolling’, Mater. Sci. Technol., 1986, 2, 620–624. doi: 10.1179/mst.1986.2.6.620
   Web of Science ®Google Scholar
• G. Y. Deng, A. K. Tieu, L. Y. Si, L. H. Su, C. Lu, H. Wang, M. Liu, H. T. Zhu and X. H. Liu: ‘Influence of cold rolling reduction on the deformation behaviour and crystallographic orientation development’, Comput. Mater. Sci., 2014, 81, 2–9. doi: 10.1016/j.commatsci.2013.06.054
   Web of Science ®Google Scholar
• S. H. Lee and D. N. Lee: ‘Analysis of deformation textures of asymmetrically rolled steel sheets’, Int. J. Mech. Sci., 2001, 43, 1997–2015. doi: 10.1016/S0020-7403(01)00025-X
   Web of Science ®Google Scholar
• J. G. Lenard, M. Pietrzyk and L. Cser: ‘Mathematical and physical simulation of the properties of hot rolled products’, 1st edn, 85–150; 1999, Oxford, Elsevier.
   Google Scholar
• J. Sidor, R. Petrov and L. Kestens: ‘Texture control in aluminum sheets by conventional and asymmetric rolling’ in ‘Comprehensive materials processing’, (ed. S. Hashmi), Vol. 3.17, 447–498; 2014, Amsterdam, Elsevier Science & Technology.
   Google Scholar
• P. R. Dawson: ‘On modeling of mechanical property changes during flat rolling of aluminum’, Int. J. Solids Struct., 1987, 23, 947–968. doi: 10.1016/0020-7683(87)90089-8
   Web of Science ®Google Scholar
• B. Avitzur: ‘Friction-aided strip rolling with unlimited reduction’, Int. J. Mach. Tool Des. Res., 1980, 20, 197–210. doi: 10.1016/0020-7357(80)90004-9
   Web of Science ®Google Scholar
• W. Truszkowski, J. Krol and B. Major: ‘Inhomogeneity of rolling texture in fcc metals’, Metall. Trans. A, 1980, 11, 749–758. doi: 10.1007/BF02661204
   Web of Science ®Google Scholar
• I. L. Dillamore, C. J. E. Smith and T. W. Watson: ‘Oriented nucleation in the formation of annealing textures in iron’, Met. Sci. J., 1967, 1, 49–54. doi: 10.1179/msc.1967.1.1.49
   Google Scholar
• A. L. Etter, M. H. Mathon, T. Baudin, V. Branger and R. Penelle: ‘Influence of the cold rolled reduction on the stored energy and the recrystallization texture in a Fe–53%Ni alloy’, Scr. Mater., 2002, 46, 311–317. doi: 10.1016/S1359-6462(01)01245-3
   Web of Science ®Google Scholar
• T. Baudin, D. Solas, A. L. Etter, D. Ceccaldi and R. Penelle: ‘Simulation of primary recrystallization from TEM observations and neutron diffraction measurements’, Scr. Mater., 2004, 51, 427–430. doi: 10.1016/j.scriptamat.2004.05.001
   Web of Science ®Google Scholar
• B. Hutchinson: ‘Deformation substructures and recrystallisation’, Mater. Sci. Forum, 2007, 558–559, 13–22. doi: 10.4028/www.scientific.net/MSF.558-559.13
   Google Scholar
• B. Hutchinson: ‘Deformation microstructures and textures in steels’, Phil. Trans. R. Soc. Lond. A, 1999, 357, 1471–1485. doi: 10.1098/rsta.1999.0385
   Web of Science ®Google Scholar
• J. Liu, R. E. Dick, J. M. Fridy and T. N. Rouns: ‘Crystallographic texture evolution of continuous cast Al–Mn–Mg alloy sheet during cold rolling and annealing’, Mater. Sci. Eng. A, 2007, 458, 73–87. doi: 10.1016/j.msea.2006.12.119
   Web of Science ®Google Scholar
• O. Daaland and E. Nes: ‘Recrystallization texture development in commercial Al–Mn–Mg alloys’, Acta Mater., 1996, 44, 1413–1435. doi: 10.1016/1359-6454(95)00290-1
   Web of Science ®Google Scholar
• X. Wang, M. Guo, A. Chapuis, J. Luo, J. Zhang and L. Zhuang: ‘The dependence of final microstructure, texture evolution and mechanical properties of Al–Mg–Si–Cu alloy sheets on the intermediate annealing’, Mater. Sci. Eng. A, 2015, 633, 46–58. doi: 10.1016/j.msea.2015.02.029
   Web of Science ®Google Scholar
• K. Huang, O. Engler, Y. J. Li and K. Marthinsen: ‘Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states’, Mater. Sci. Eng. A, 2015, 628, 216–229. doi: 10.1016/j.msea.2015.01.064
   Web of Science ®Google Scholar
• F. J. Humphreys and M. Hatherly: ‘Recrystallization and related annealing phenomena’, 2nd edn, 2004, Oxford, Elsevier.
   Google Scholar
• K. Huang, Y. J. Li and K. Marthinsen: ‘Factors affecting the strength of P{011}<566> texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy’, J. Mater. Sci., 2015, 50, 5091–5103. doi: 10.1007/s10853-015-9063-4
   Web of Science ®Google Scholar
• Q. Zhao, K. Huang, Y. Li and K. Marthinsen: ‘Orientation preference of recrystallization in supersaturated aluminum alloys influenced by concurrent precipitation’, Metall. Mater. Trans. A, 2016, 47, 1378–1388. doi: 10.1007/s11661-015-3314-5
   Web of Science ®Google Scholar
• Q. Xie, P. Eyckens, H. Vegter, J. Moerman, A. Van Bael and P. Van Houtte: ‘Polycrystal plasticity models based on crystallographic and morphologic texture: Evaluation of predictions of plastic anisotropy and deformation texture’, Mater. Sci. Eng. A, 2013, 581, 66–72. doi: 10.1016/j.msea.2013.06.008
   Web of Science ®Google Scholar