Measuring mechanical properties of plasma-sprayed alumina coatings by nanoindentation technique

References

• P. P. Bandyopadhyay, D. Chicot, B. Venkateshwarlu, V. Racherla, X. Decoopman and J. Lesage: ‘Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings’, Mech. Mater., 2012, 53, 61–71. doi: 10.1016/j.mechmat.2012.05.006
   Web of Science ®Google Scholar
• H. Herman: ‘Plasma-sprayed coating’, Sci. Am., 1988, 256, 113–188.
   Google Scholar
• L. Pawlowski: ‘The science and engineering of thermal spray coatings’, 1995, New York, Wiley.
   Google Scholar
• H. Herman: ‘Plasma spray deposition process’, Mater. Res. Soc. Bull., 1988, 13, 60–67.
   Google Scholar
• H. Herman, C.C. Berndt and H. Wang: in ‘Ceramic films and coatings’, (ed. J. B. Wachtman and R. A. Haber), 131–188; 1993, Park Ridge, NJ, Noyes Publications.
   Google Scholar
• R. McPherson: ‘A review of microstructure and properties of plasma sprayed ceramic coatings’, Surf. Coat. Technol., 1989, 39–40, 173–181. doi: 10.1016/0257-8972(89)90052-2
   Web of Science ®Google Scholar
• C. J. Li and A. Ohmori: ‘Relationships between the microstructure and properties of thermally sprayed deposits’, J. Therm. Spray Technol., 2001, 11, 365–374. doi: 10.1361/105996302770348754
   Web of Science ®Google Scholar
• A. Krell and S. Schadlich: ‘Nanoindentation hardness of submicrometer alumina ceramics’, Mater. Sci. Eng. A, 2001, 307, 172–181. doi: 10.1016/S0921-5093(00)01818-9
   Web of Science ®Google Scholar
• W. D. Nix: ‘Elastic and plastic properties of thin films on substrates: nanoindentation techniques’, Mater. Sci. Eng. A, 1997, 234–236, 37–44. doi: 10.1016/S0921-5093(97)00176-7
   Web of Science ®Google Scholar
• M. F. Doerner and W. D. Nix: ‘A method for interpreting the data from depth-sensing indentation instruments’, J. Mater. Res., 1986, 1, 601–609. doi: 10.1557/JMR.1986.0601
   Web of Science ®Google Scholar
• W. C. Oliver and G. M. Pharr: ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments’, J. Mater. Res., 1992, 7, (6), 1564–1583. doi: 10.1557/JMR.1992.1564
   Web of Science ®Google Scholar
• I. N. Sneddon: ‘The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile’, Int. J. Eng. Sci., 1965, 3, (1), 47–57. doi: 10.1016/0020-7225(65)90019-4
   Google Scholar
• J. B. Pethica, R. Hutchings and W. C. Oliver: ‘Hardness measurement at penetration depths as small as 20 nm’, Philos. Mag. A, 1983, 48, 593–606. doi: 10.1080/01418618308234914
   Google Scholar
• F. Frolich, P. Grau and W. Grellmann: ‘Performance and analysis of recording microhardness tests’, Phys. Status. Solidi, 1977, 42, 79–89. doi: 10.1002/pssa.2210420106
   Web of Science ®Google Scholar
• D. Newey, M. A. Wilkins and H. M. Pollock: ‘An ultra-low-load penetration hardness tester’, J. Phys. E: Sci. Instrum., 1982, 15, 119–122. doi: 10.1088/0022-3735/15/1/023
   Google Scholar
• C. Li, A. Ohmori and R. McPherson: ‘The relationship between microstructure and Young’s modulus of thermally sprayed ceramic coatings’, J. Mater. Sci., 1997, 32, 997–1004. doi: 10.1023/A:1018574221589
   Web of Science ®Google Scholar
• A. Pajares, L. Weia, B. R. Lawn, N. P. Padture and C. C. Berndt: ‘Mechanical characterization of plasma sprayed ceramic coatings on metal substrates by contact testing’, Mater. Sci. Eng. A, 1996, 208, 158–165. doi: 10.1016/0921-5093(95)10071-7
   Web of Science ®Google Scholar
• Y. Xie and H. M. Hawthorne: ‘The damage mechanisms of several plasma-sprayed ceramic coatings in controlled scratching’, Wear, 1999, 233–235, 293–305. doi: 10.1016/S0043-1648(99)00211-2
   Web of Science ®Google Scholar
• O. Racek and C. C. Berndt: ‘Mechanical property variations within thermal barrier coatings’, Surf. Coat. Technol., 2007, 202, 362–369. doi: 10.1016/j.surfcoat.2007.05.091
   Web of Science ®Google Scholar
• E. Rayon, V. Bonache, M. D. Salvador, J. J. Roa and E. Sánchez: ‘Hardness and Young's modulus distributions in atmospheric plasma sprayed WC–Co coatings using nanoindentation’, Surf. Coat. Technol., 2011, 205, 4192–4197. doi: 10.1016/j.surfcoat.2011.03.012
   Web of Science ®Google Scholar
• J. G. L. Barbera-Sosa, Y. Y. Santana, M. H. Staia, D. Chicot, J. Lesage, J. Caro, G. Mesmacque and E. S. Puchi-Cabrera: ‘Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF’, Surf. Coat. Technol., 2008, 202, 4552–4559. doi: 10.1016/j.surfcoat.2008.04.041
   Web of Science ®Google Scholar
• R. Musalek, J. Matejicek, M. Vilemova and O. Kovarik: ‘Non-linear mechanical behavior of plasma sprayed alumina under mechanical and thermal Loading’, J. Therm. Spray. Technol., 2010, 19, (1–2), 422–428. doi: 10.1007/s11666-009-9362-x
   Web of Science ®Google Scholar
• S. S. Samandari and K. A. Gross: ‘Nanoindentation on the surface of thermally sprayed coatings’, Surf. Coat. Technol., 2009, 203, 3516–3520. doi: 10.1016/j.surfcoat.2009.05.033
   Web of Science ®Google Scholar
• J. Nohava, R. Mušálek, J. Matějíček and M. Vilémová: ‘A contribution to understanding the results of instrumented indentation on thermal spray coatings – case study on Al2O3 and stainless steel’, Surf. Coat. Technol., 2014, 240, 243–249. doi: 10.1016/j.surfcoat.2013.12.033
   Web of Science ®Google Scholar
• S. Houdková, O. Bláhová, F. Zahálka and M. Kašparová: ‘The instrumented indentation study of HVOF-sprayed hardmetal coatings’, J. Therm. Spray Technol., 2012, 21, (1), 77–85. doi: 10.1007/s11666-011-9677-2
   Web of Science ®Google Scholar
• A. Afrasiabi and A. Kobayashi: ‘Hot corrosion control in plasma sprayed YSZ coating by alumina layer with evaluation of microstrcuture and nanoindentation data (H, E)’, Vacuum, 2013, 88, 103–107. doi: 10.1016/j.vacuum.2012.03.024
   Web of Science ®Google Scholar
• J. M. Luo, C. Y. Dai, Y. G. Shen and W. G. Mao: ‘Elasto-plastic characteristics and mechanical properties of as-sprayed 8 mol% yttria-stabilized zirconia coating under nano-scales measured by nanoindentation’, Appl. Surf. Sci., 2014, 309, 271–277. doi: 10.1016/j.apsusc.2014.05.026
   Web of Science ®Google Scholar
• W. G. Mao, J. M. Luo, C. Y. Dai and Y. G. Shen: ‘Effect of heat treatment on deformation and mechanical properties of 8 mol% yttria-stabilized zirconia by Berkovich nanoindentation’, Appl. Surf. Sci., 2015, 338, 92–98. doi: 10.1016/j.apsusc.2015.02.108
   Web of Science ®Google Scholar
• J. Dubsky, P. Chraska, B. K. lman, C. C. Stahr and L. M. Berger: ‘Phase formation control in plasma sprayed alumina-chromia coatings’, Ceram. Silik., 2011, 55, (3), 294–300.
   Web of Science ®Google Scholar
• W. G. Mao, Y. G. Shen and C. Lu: ‘Deformation behavior and mechanical properties of polycrystalline and single crystal alumina during nanoindentation’, Scripta Mater., 2011, 65, 127–130. doi: 10.1016/j.scriptamat.2011.03.022
   Web of Science ®Google Scholar
• W. G. Mao and Y. G. Shen: ‘Nanoindentation study of pop-in phenomenon characteristics and mechanical properties of sapphire (102) crystal’, J. Am. Ceram. Soc., 2012, 95, (11), 3605–3612. doi: 10.1111/j.1551-2916.2012.05405.x
   Web of Science ®Google Scholar
• J. DuttaMajumdar and L. Li: ‘Development of titanium boride (TiB) dispersed titanium (Ti) matrix composite by direct laser cladding’, Mater. Lett., 2010, 64, 1010–1012. doi: 10.1016/j.matlet.2009.12.007
   Web of Science ®Google Scholar
• A. Biswas, L. Li, U. K. Chatterjee, I. Manna, S. K. Pabia and J. Dutta Majumdar: ‘Mechanical and electrochemical properties of laser surface nitrided Ti–6Al–4V’, Scripta Mater., 2008, 59, 239–242. doi: 10.1016/j.scriptamat.2008.03.020
   Web of Science ®Google Scholar
• H. Hertz: ‘Miscellaneous papers by H. Hertz’, 1896, London, Macmillan.
   Google Scholar
• S. Basu, A. Moseson and M. W. Barsoum: ‘On the determination of spherical nanoindentation stress-strain curves’, J. Mater. Res., 2006, 21, 2628–2637. doi: 10.1557/jmr.2006.0324
   Web of Science ®Google Scholar
• D. Tabor: ‘The hardness of metals’, 1951, Oxford, Clarendon Press.
   Google Scholar
• L. B. Freund and S. Suresh: ‘Thin film materials: stress, defect formation and surface evolution’, 2004, New York, Cambridge University Press.
   Google Scholar
• K. L. Johnson: ‘The correlation of indentation experiments’, J. Mech. Phys. Solids, 1970, 18, 115–126. doi: 10.1016/0022-5096(70)90029-3
   Web of Science ®Google Scholar
• Z. Cao and X. Zhang: ‘Nanoindentation stress–strain curves of plasma-enhanced chemical vapor deposited silicon oxide thin films’, Thin Solid Films, 2008, 516, 1941–1951. doi: 10.1016/j.tsf.2007.09.033
   Web of Science ®Google Scholar
• F. Vargas, H. Ageorges, P. Fournier, P. Fauchais and M. E. López: ‘Mechanical and tribological performance of Al2O3-TiO2 coatings elaborated by flame and plasma spraying’, Surf. Coat. Technol., 2010, 205, 1132–1136. doi: 10.1016/j.surfcoat.2010.07.061
   Web of Science ®Google Scholar
• K. A. Habib, J. J. Saura, C. Ferrer, M. S. Damra, E. Gimenez and L. Cabedo: ‘Comparison of flame sprayed Al2O3/TiO2 coatings: their microstructure, mechanical properties and tribology behavior’, Surf. Coat. Technol., 2006, 201, 1436–1443. doi: 10.1016/j.surfcoat.2006.02.011
   Web of Science ®Google Scholar