Effect of holding pressure on densification and mechanical properties of C_f/Mg composites

References

• A. Bakkar, R. Galun and V. Neubert: ‘Microstructural characterisation and corrosion behaviour of laser cladded Al–12Si alloy onto magnesium AS41/carbon fibre composite’, Mater. Sci. Technol.-Lond., 2006, 22, (3), 353–362. doi: 10.1179/026708306X81568
   Web of Science ®Google Scholar
• S. J. Harris: ‘Cast metal matrix composites’, Mater. Sci. Technol.-Lond., 1988, 4, 231–239. doi: 10.1179/mst.1988.4.3.231
   Web of Science ®Google Scholar
• L. Qi, W. Tian and J. Zhou: ‘Homogenization of transverse elastic properties of Cf/Mg composites at an elevated temperature and containing a small fraction of liquid phase’, Compos. Sci. Technol., 2015, 117, 234–243. doi: 10.1016/j.compscitech.2015.06.017
   Web of Science ®Google Scholar
• W. Hufenbach, M. Andrich, A. Langkamp and A. Czulak: ‘Fabrication technology and material characterization of carbon fibre reinforced magnesium’, J. Mater. Process. Technol., 2006, 175, 218–224. doi: 10.1016/j.jmatprotec.2005.04.023
   Web of Science ®Google Scholar
• R. Alderliesten, C. Rans and R. Benedictus: ‘The applicability of magnesium based fibre metal laminates in aerospace structures’, Compos. Sci. Technol., 2008, 68, (14), 2983–2993. doi: 10.1016/j.compscitech.2008.06.017
   Web of Science ®Google Scholar
• J. W. Kaczmar, K. Pietrzak and W. Woosinaski: ‘The production and application of metal matrix composite materials’, J. Mater. Process. Technol., 2000, 106, 58–67. doi: 10.1016/S0924-0136(00)00639-7
   Web of Science ®Google Scholar
• S. Vaucher, O. Beffort, J. Kubler and F. Lehner: ‘An orthotropic magnesium-carbon composite as a lightweight heat-guide material with high specific stiffness and radiation transparency’, Adv. Eng. Mater., 2003, 5, (9), 669–672. doi: 10.1002/adem.200300370
   Web of Science ®Google Scholar
• H. Z. Ye and X. Y. Liu: ‘Review of recent studies in magnesium matrix composites metal-matrix composites for space applications’, J. Mater. Sci., 2004, 39, 6153–6171. doi: 10.1023/B:JMSC.0000043583.47148.31
   Web of Science ®Google Scholar
• S. Sankaranarayanan, M. K. Habibi, S. Jayalakshmi, K. J. Ai, A. Almajid and M. Gupta: ‘Nano-AlN particle reinforced Mg composites: microstructural and mechanical properties’, Mater. Sci. Technol.-Lond., 2015, 31, (9), 1122–1130. doi: 10.1179/1743284714Y.0000000686
   Web of Science ®Google Scholar
• L. Chen and Y. Yao: ‘Processing, microstructures, and mechanical properties of magnesium matrix composites: a review’, J. Acta Metall. Sin. (Engl. Lett.), 2014, 27, (5), 762–774. doi: 10.1007/s40195-014-0161-0
   Web of Science ®Google Scholar
• M. H. Stacey: ‘Production and characterization of fibres for metal matrix composites’, Mater. Sci. Technol.-Lond., 1988, 4, 227–230. doi: 10.1179/mst.1988.4.3.227
   Web of Science ®Google Scholar
• T. Shalu, E. Abhilash and M. A. Joseph: ‘Development and characterization of liquid carbon fibre reinforced aluminium matrix composite’, J. Mater. Process. Technol., 2009, 209, 4809–4813. doi: 10.1016/j.jmatprotec.2008.12.012
   Web of Science ®Google Scholar
• J. Liu, L. H. Qi, J. T. Guan, Y. Q. Ma and J. M. Zhou: ‘Compressive behavior of Csf/AZ91D composites by liquid–solid extrusion directly following vacuum infiltration technique’, Mater. Sci. Eng. A, 2012, 531, 164–170. doi: 10.1016/j.msea.2011.10.051
   Web of Science ®Google Scholar
• L. Qi, X. Wei, L. Ju, Y. Ma, W. Deng and H. Li: ‘Design and application of forming device for the thin-walled Cf/Mg Composite component’, J. Mater. Process. Technol., 2016, 238, 459–465. doi: 10.1016/j.jmatprotec.2016.08.007
   Web of Science ®Google Scholar
• Y. H. Zhang and G. H. Wu: ‘Experimental study on effect of temperature on mechanical properties of graphite fibre reinforced Al matrix composites’, Mater. Sci. Technol.-Lond., 2010, 26, (2), 184–187. doi: 10.1179/174328408X389788
   Web of Science ®Google Scholar
• J. Shen, W. Yin and Q. Wei: ‘Effect of ceramic nanoparticle reinforcements on the Quasistatic and dynamic mechanical properties of magnesium-based metal matrix composites’, J. Mater. Res., 2013, 13, (13), 1835–1852. doi: 10.1557/jmr.2013.16
   Web of Science ®Google Scholar
• Y. C. Guan, W. Zhou, H. Y. Zheng and Z. L. Li: ‘Solidification microstructure of AZ91D Mg alloy after laser surface melting’, Appl. Phys. A, 2010, 101, 339–344. doi: 10.1007/s00339-010-5880-0
   Web of Science ®Google Scholar
• E. K. Lee, R. S. Amano and P. K. Rohatgi: ‘Metal matrix composite solidification in the presence of cooled fibres: numerical simulation and experimental observation’, Heat Mass Transfer, 2007, 43, 741–748. doi: 10.1007/s00231-005-0057-7
   Web of Science ®Google Scholar
• E. K. Lee, R. S. Amano and P. K. Rohatgi: ‘Numerical simulation and experimental study of solidification of squeeze cast aluminum composites in the presence of cooled fibres’, Heat Mass Transfer, 2007, 44, 71–84. doi: 10.1007/s00231-006-0197-4
   Web of Science ®Google Scholar
• H. G. Seong, H. F. Lopez, M. Gajdraziska-Josifovska and P. K. Rohatgi: ‘Nucleation effects in thermally managed graphite fibre-reinforced Al-Cu and Al-Si composites’, Metall. Mater. Trans. A, 2007, 38, 2796–2804. doi: 10.1007/s11661-007-9316-1
   Web of Science ®Google Scholar
• R. B. G. Sutradhar: ‘Solidification characteristics and forgeability of aluminium alloy metal matrix composites’, Trans. Indian. Inst. Met., 2012, 65, (4), 355–363. doi: 10.1007/s12666-012-0140-y
   Web of Science ®Google Scholar
• A. Dorner-Reisel, Y. Nishida, V. Klemm, K. Nestler, G. Marx and E. Müller: ‘Investigation of interfacial interaction between uncoated and coated carbon fibres and the magnesium alloy AZ91’, Anal. Bioanal. Chem., 2002, 374, 635–638. doi: 10.1007/s00216-002-1391-y
   PubMed Web of Science ®Google Scholar
• J. Guan, L. Qi, J. Liu, J. Zhou and X. Wei: ‘Threshold pressure and infiltration behavior of liquid metal into fibrous preform’, T. Nonferr. Metal. Soc., 2013, 23, 3173–3179. doi: 10.1016/S1003-6326(13)62849-6
   Web of Science ®Google Scholar
• Y. Zhang, G. Wu, W. Liu, L. Zhang, S. Pang and W. Ding: ‘Preparation and Rheo-squeeze casting of semi-solid AZ91–2 wt% Ca magnesium alloy by gas bubbling process’, J. Mater. Res., 2015, 30, (6), 825–832. doi: 10.1557/jmr.2015.36
   Web of Science ®Google Scholar
• S. Kuadela, A. John, S. Baunack and K. Jr. Wetzig: ‘A solidworkser spectroscopy study of MgLi melt affected carbon/pyrocarbon fibres’, Appl. Surf. Sci., 2001, 179, 129–132. doi: 10.1016/S0169-4332(01)00288-4
   Web of Science ®Google Scholar
• R. Etemadi, K. M. Pillai, P. K. Rohatgi and S. A. Hamidi: ‘On porosity formation in metal matrix composites made with dual-scale fibre reinforcements using pressure infiltration process’, Metall. Mater. Trans. A, 2015, 46, 2119–2133. doi: 10.1007/s11661-015-2792-9
   Web of Science ®Google Scholar
• F. Wu, J. Zhu, Y. Chen and G. D. Zhang: ‘The effects of processing on the microstructures and properties of Gr/Mg composites’, Mater. Sci. Eng. A, 2000, 277, (1–2), 143–147. doi: 10.1016/S0921-5093(99)00548-1
   Web of Science ®Google Scholar
• S. L. Sin, D. Dube and R. Tremblay: ‘An investigation on microstructural and mechanical properties of solid mould investment casting of AZ91D magnesium alloy’, Mater. Charact., 2008, 59, 178–187. doi: 10.1016/j.matchar.2007.04.026
   Web of Science ®Google Scholar
• W. G. Wang, B. L. Xiao and Z. Y. Ma: ‘Evolution of interfacial nanostructures and stress states in mg matrix composites reinforced with coated continuous carbon fibres’, J. Compos. Sci. Technol., 2012, 72, 152–158. doi: 10.1016/j.compscitech.2011.10.008
   Web of Science ®Google Scholar
• W. M. Balaba, D. A. Jr. Weirauch, A. J. Perrotta, G. H. Armstrong, P. N. Anyalebechi and S. Kauffman: ‘The effect of siloxane spin-on-glass and reaction bonded silicon oxycarbide coatings with a self-propagating interfacial reaction treatment (ASPIRE) in the synthesis of carbon/graphite fibre-reinforced aluminum metal matrix composites’, J. Mater. Res., 1993, 12, (12), 3192–3201. doi: 10.1557/JMR.1993.3192
   Web of Science ®Google Scholar
• H. G. Seong, H. F. Lopez and P. K. Rohatgi: ‘Microsegregation during solidification of graphitic fibre-reinforced aluminum alloys under external heat sinks’, Metall. Mater. Trans. A, 2007, 38, 138–149. doi: 10.1007/s11661-006-9030-4
   Web of Science ®Google Scholar