Residual stress field analysis of Al/steel butt joint using laser welding–brazing

References

• Saida K, Ohnishi H, Nishimoto K. Fluxless laser brazing of aluminium alloy to galvanized steel using a tandem beam-dissimilar laser brazing of aluminium alloy and steels. Welding Int. 2010;24(3):161–168. doi: 10.1080/09507110902843065
   Google Scholar
• Bajpei T, Chelladurai H, Ansari MZ. Mitigation of residual stresses and distortions in thin aluminum alloy GMAW plates using different heat sink models. J Manuf Process. 2016;22:199–210. doi: 10.1016/j.jmapro.2016.03.011
   Web of Science ®Google Scholar
• Li B, Wang X, Chen H, et al. Influence of heat treatment on the strength and fracture toughness of 7N01 aluminum alloy. J Alloys Compd. 2016;678:160–166. doi: 10.1016/j.jallcom.2016.03.228
   Web of Science ®Google Scholar
• Yazdipour A, Heidarzadeh A. Effect of friction stir welding on microstructure and mechanical properties of dissimilar Al 5083-H321 and 316L stainless steel alloy joints. J Alloys Compd. 2016;680:595–603. doi: 10.1016/j.jallcom.2016.03.307
   Web of Science ®Google Scholar
• Shi Y, Shao L, Huang JK, et al. Effects of Si and Mg elements on microstructure of aluminum-steel joints produced by pulsed DE-GMA welding–brazing. Mater Sci Technol. 2013;29(9):1118–1124. doi: 10.1179/1743284713Y.0000000291
   Web of Science ®Google Scholar
• Mathieu A, Pontevicci S, Viala JC, et al. Laser brazing of a steel/aluminium assembly with hot filler wore(88% Al, 12% Si). Mater Sci Eng A. 2006;435–436:19–28. doi: 10.1016/j.msea.2006.07.099
   Web of Science ®Google Scholar
• Agudo L, Eyidi D, Schmaranzer CH, et al. Intermetallic FexAly-phases in a steel/Al-alloy fusion weld. J Mater Sci. 2007;42(12):4205–4214. doi: 10.1007/s10853-006-0644-0
   Web of Science ®Google Scholar
• Gąsior W, Dębski A, Moser Z. Formation enthalpy of intermetallic phases from Al-Fe system measured with solution calorimetric method. Intermetallics. 2012;24:99–105. doi: 10.1016/j.intermet.2012.02.001
   Web of Science ®Google Scholar
• Kouadri-David A, Team P. Study of metallurgic and mechanical properties of laser welded heterogeneous joints between DP600 galvanised steel and aluminium 6082. Mater Des. 2014;54:184–195. doi: 10.1016/j.matdes.2013.07.093
   Web of Science ®Google Scholar
• Gatzen M, Radel T, Thomy C, et al. Wetting and solidification characteristics of aluminium on zinc coated steel in laser welding and brazing. J Mater Process Technol. 2016;238:352–360. doi: 10.1016/j.jmatprotec.2016.07.026
   Web of Science ®Google Scholar
• Fukumoto S, Tsubakino H, Okita K, et al. Friction welding process of 5052 aluminium alloy to 304 stainless steel. Mater Sci Technol. 1999;15(9):1080–1086. doi: 10.1179/026708399101506805
   Web of Science ®Google Scholar
• El-Sayed MH, Hafez KM, Naka M. Interfacial structure and bond strength of ultrasonic brazed Al-304 stainless steel dissimilar joints. Sci Technol Weld Join. 2004;9:560–564. doi: 10.1179/136217104225021779
   Web of Science ®Google Scholar
• Lee KJ, Kumai S, Arai T, et al. Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding. Mater Sci Eng: A. 2007;471(1):95–101. doi: 10.1016/j.msea.2007.04.033
   Web of Science ®Google Scholar
• Dharmendra C, Rao KP, Wilden J, et al. Study on laser welding–brazing of zinc coated steel to aluminum alloy with a zinc based filler. Mater Sci Eng: A. 2011;528(3):1497–1503. doi: 10.1016/j.msea.2010.10.050
   Web of Science ®Google Scholar
• Torkamany MJ, Tahamtan S, Sabbaghzadeh J. Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd:YAG pulsed laser. Mater Des. 2010;31(1):458–465. doi: 10.1016/j.matdes.2009.05.046
   Web of Science ®Google Scholar
• Brüggemann G, Mahrle A, Benziger T. Comparison of experimental determined and numerical simulated temperature fields for quality assurance at laser beam welding of steels and aluminium alloyings. NDT & E Int. 2000;33(7):453–463. doi: 10.1016/S0963-8695(00)00017-7
   Web of Science ®Google Scholar
• Mathieu A, Matteï S, Deschamps A, et al. Temperature control in laser brazing of a steel/aluminium assembly using thermographic measurements. NDT & E Int. 2006;39(4):272–276. doi: 10.1016/j.ndteint.2005.08.005
   Web of Science ®Google Scholar
• Peyre P, Sierra G, Deschaux-Beaume F, et al. Generation of aluminium-steel joints with laser-induced reactive wetting. Mater Sci Eng: A. 2007;444(1):327–338. doi: 10.1016/j.msea.2006.09.111
   Web of Science ®Google Scholar
• Meng X, Qin G, Su Y, et al. Numerical simulation of large spot laser+ MIG arc brazing-fusion welding of Al alloy to galvanized steel. J Mater Process Technol. 2015;222:307–314. doi: 10.1016/j.jmatprotec.2015.03.020
   Web of Science ®Google Scholar
• Ueda Y, Yamakawa T. Thermal stress analysis of metals with temperature dependent mechanical properties. Mech Behav Mater. 1972:10–20.
   Google Scholar
• Ueda Y, Murakawa H, Nakacho K, et al. Establishment of computational welding mechanics (mechanics, strength & structural design). Trans JWRI. 1995;24(2):73–86.
   Google Scholar
• Nishikawa H, Serizawa H, Murakawa H. Actual application of FEM to analysis of large scale mechanical problems in welding. Sci Technol Weld Join. 2007;12(2):147–152. doi: 10.1179/174329307X164274
   Web of Science ®Google Scholar
• Na MG, Kim JW, Lim DH. Prediction of residual stress for dissimilar metals welding at nuclear power plants using fuzzy neural network models. Nucl Eng Technol. 2007;39(4):337–348. doi: 10.5516/NET.2007.39.4.337
   Web of Science ®Google Scholar
• Na MG, Kim JW, Lim DH, et al. Residual stress prediction of dissimilar metals welding at NPPs using support vector regression. Nucl Eng Des. 2008;238(7):1503–1510. doi: 10.1016/j.nucengdes.2007.12.003
   Web of Science ®Google Scholar
• Deng D, Ogawa K, Kiyoshima S, et al. Prediction of residual stresses in a dissimilar metal welded pipe with considering cladding, buttering and post weld heat treatment. Comput Mater Sci. 2009;47(2):398–408. doi: 10.1016/j.commatsci.2009.09.001
   Web of Science ®Google Scholar
• Kiyoshima S, Deng D, Ogawa K, et al. Influences of heat source model on welding residual stress and distortion in a multi-pass J-groove joint. Comput Mater Sci. 2009;46(4):987–995. doi: 10.1016/j.commatsci.2009.05.002
   Web of Science ®Google Scholar
• Rosental D. Mathematical theory of heat distribution during welding and cutting. Weld J. 1941;20(5):220–234.
   Google Scholar
• Rosental D. The theory of moving sources of heat and its application to metal treatments. Trans ASME. 1946;43:849–866.
   Google Scholar
• Sun Z, Ion JC. Laser welding of dissimilar metal combinations. J Mater Sci. 1995;30(17):4205–4214. doi: 10.1007/BF00361499
   Web of Science ®Google Scholar
• Zeng Z, Wang LJ, Zhang H. Efficient estimation of thermophysical parameters for LF6 aluminum alloy. Mater Sci Technol. 2008;24(3):309–313. doi: 10.1179/174328408X276170
   Web of Science ®Google Scholar
• Pecharapa W, Kar A. Effects of phase changes on weld pool shape in laser welding. J Phys D: Appl Phys. 1997;35(24):1570–1576.
   Google Scholar
• Cuansong WU. Welding thermal process and weld pool behavior. Beijing: China Machine Press; 2008.
   Google Scholar
• Radaj D. Heat effects of welding-temperature field, residual stress [distortion]. Berlin: Springer; 2012.
   Google Scholar
• Dean D. FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Mater Des. 2009;30(2):359–366. doi: 10.1016/j.matdes.2008.04.052
   Web of Science ®Google Scholar
• Deng D. Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded join. Mater Des. 2013;49:1022–1033. doi: 10.1016/j.matdes.2013.02.065
   Web of Science ®Google Scholar
• Zenglei Z, Qingyu S, Yuan L, et al. Establishment and application of material models for numerical simulation of welding process. Trans China Weld Instit. 2009;30:45–48.
   Google Scholar
• Wei S, Cuo Y, Shiyu C. Effect of laser welding sequential on welding residual stress of galvanized steel. Applied Laser. 2016;36:40–45.
   Google Scholar
• Liang W, Murakawa H, Deng D. Investigation of welding residual stress distribution in with an emphasis on the features near weld end-start. Mater Des. 2015;67:303–312. doi: 10.1016/j.matdes.2014.11.037
   Web of Science ®Google Scholar