Effects of friction-stir processing with water cooling on the properties of an Al–Zn–Mg–Cu Alloy

References

• Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R. 2005;50:1–78. doi: 10.1016/j.mser.2005.07.001
   Web of Science ®Google Scholar
• Liu HJ, Feng XL. Effect of post-processing heat treatment on microstructure and microhardness of water-submerged friction stir processed 2219-T6 aluminium alloy. Mater Des. 2013;47:101–105. doi: 10.1016/j.matdes.2012.11.056
   Web of Science ®Google Scholar
• Chen Y, Ding H, Li JZ, et al. Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy. Trans Nonferr Met Soc. 2017;27:789–796. doi: 10.1016/S1003-6326(17)60090-6
   Web of Science ®Google Scholar
• Zhang Z, Xiao BL, Ma ZY. Influence of water cooling on microstructure and mechanical properties of friction stir welded 2014Al-T6 joints. Mater Sci Eng A. 2014;614:6–15. doi: 10.1016/j.msea.2014.06.093
   Web of Science ®Google Scholar
• Chen Y, Ding H, Malopheyev S, et al. Influence of multi-pass friction stir processing on microstructure and mechanical properties of 7B04-O Al alloy. Trans Nonferr Met Soc. 2015;25:2524–2532. doi: 10.1016/S1003-6326(15)63871-7
   Web of Science ®Google Scholar
• Malopheyev S, Vysotskiy I, Kulistskiy V, et al. Optimization of processing-microstructure-properties relationship in friction-stir welded 6061-T6 aluminum alloy. Mater Sci Eng A. 2016;662:136–143. doi: 10.1016/j.msea.2016.03.063
   Web of Science ®Google Scholar
• Martinez N, Kumar N, Misra RS, et al. Effect of tool dimensions and parameters on the microstructure of friction stir welded aluminum 7449 alloy of various thicknesses. Mater Sci Eng A. 2017;684:470–479. doi: 10.1016/j.msea.2016.12.077
   Web of Science ®Google Scholar
• Sabari SS, Malarvizhi S, Balasubramanian V. Influence of tool traverse speed on tensile properties of air cooled and water cooled friction stir welded AA2519-87 alumium alloy joints. J Mater Process Technol. 2016;237:286–300. doi: 10.1016/j.jmatprotec.2016.06.015
   Web of Science ®Google Scholar
• Zhang Z, Xiao BL, Ma ZY. Enhancing properties of friction stir welded 2219Al-T6 joints at high welding speed through water cooling and post-welding artificial ageing. Mater Charact. 2015;106:255–265. doi: 10.1016/j.matchar.2015.06.003
   Web of Science ®Google Scholar
• Fu RD, Sun ZQ, Sun RC, et al. Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir welding. Mater Des. 2011;32:4825–4831. doi: 10.1016/j.matdes.2011.06.039
   Web of Science ®Google Scholar
• Sharma C, Dwivedi DK, Kumar P. Influence of in-process cooling on tensile behavior of friction stir welded joints of AA7039. Mater Sci Eng A. 2012;556:479–487. doi: 10.1016/j.msea.2012.07.016
   Web of Science ®Google Scholar
• Chen Y, Ding H, Cai ZH, et al. Effect of initial base metal temper on microstructure and mechanical properties of friction stir processed Al-7B04 alloy. Mater Sci Eng A. 2016;650:396–403. doi: 10.1016/j.msea.2015.10.083
   Web of Science ®Google Scholar
• Chen Y, Ding H, Cai ZH, et al. Microstructural and mechanical characterization of a dissimilar friction stir-welded AA5083-AA7B04 butt joint. J Mater Eng Perform. 2017;26:530–539. doi: 10.1007/s11665-016-2482-9
   Web of Science ®Google Scholar
• Li C, Yan M, Wu XD, et al. Constitutive equations in creep of 7B04 aluminum alloy. Mater Sci Eng A. 2010;527:3623–3629. doi: 10.1016/j.msea.2010.02.047
   Web of Science ®Google Scholar
• Zhao YQ, Liu HJ, Chen SX, et al. Effect of sleeve plunge depth on microstructures and mechanical properties of friction spot welded alclad 7B04-T74 aluminum alloy. Mater Des. 2014;62:40–46. doi: 10.1016/j.matdes.2014.05.012
   Web of Science ®Google Scholar
• Malopheyev S, Mironov S, Kulitskiy V, et al. Friction-stir welding of ultra-fine grained sheets of Al-Mg-Sc-Zr alloy. Mater Sci Eng A. 2015;624:132–139. doi: 10.1016/j.msea.2014.11.079
   Web of Science ®Google Scholar
• Sato YS, Takahashi H, Park SH, et al. Characteristic of the kissing-bond in friction stir weled Al alloy 1050. Mater Sci Eng A. 2005;405:333–338. doi: 10.1016/j.msea.2005.06.008
   Web of Science ®Google Scholar
• Chen Y, Ding H, Li JZ, et al. Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy. Mater Sci Eng A. 2016;650:281–289. doi: 10.1016/j.msea.2015.10.057
   Web of Science ®Google Scholar
• Su JQ, Nelson TW, Stering CJ. Microstructure evolution during FSW/FSP of high strength aluminum alloys. Mater Sci Eng A. 2005;405:277–286. doi: 10.1016/j.msea.2005.06.009
   Web of Science ®Google Scholar
• Hao HL, Ni DR, Huang H, et al. Effect of welding parameters on microstructure and mechanical properties of friction stir welded Al-Mg-Er alloy. Mater Sci Eng A. 2013;559:889–896. doi: 10.1016/j.msea.2012.09.041
   Web of Science ®Google Scholar
• Liu XC, Sun YF, Fujii H. Clarification of microstructure evolution of aluminum during friction stir welding using liquid CO2 rapid cooling. Mater Des. 2017;129:151–163. doi: 10.1016/j.matdes.2017.05.013
   Web of Science ®Google Scholar
• Lloyd DJ, Court SA. Influence of grain size on tensile properties of Al-Mg alloys. Mater Sci Technol. 2003;19:1349–1354. doi: 10.1179/026708303225006088
   Web of Science ®Google Scholar
• Hasegawa H, Komura S, Utsunomiya A, et al. Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions. Mater Sci Eng A. 1999;265:188–196. doi: 10.1016/S0921-5093(98)01136-8
   Web of Science ®Google Scholar
• Malopheyev S, Kaibyshev R. Strengthening mechanisms in a Zr-modified 5083 alloy deformed to high strains. Mater Sci Eng A. 2015;620:246–252. doi: 10.1016/j.msea.2014.10.030
   Web of Science ®Google Scholar
• Yan J, Reynolds AP. Effect of initial base metal temper on mechanical properties in AA7050 friction stir welds. Sci Technol Weld Join. 2009;14:282–287. doi: 10.1179/136217109X406910
   Web of Science ®Google Scholar
• Sharma C, Dwivedi DK, Kumar P. Influence of pre-weld temper conditions of base metal on microstructure and mechanical properties of friction stir weld joints of Al-Zn-Mg alloy AA7039. Mater Sci Eng A. 2015;620:107–119. doi: 10.1016/j.msea.2014.09.094
   Web of Science ®Google Scholar
• Zhang Z, Xiao BL, Ma ZY. Hardness recovery mechanism in the heat-affected zone during long-term natural aging and its influence on the mechanical properties and fracture behavior of friction stir welded 2024Al-T351 joints. Acta Mater. 2014;73:227– 239. doi: 10.1016/j.actamat.2014.04.021
   Web of Science ®Google Scholar
• Aydin H, Bayram A, Durgun I. The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints. Mater Des (1980–2015). 2010;31:2568–2577. doi: 10.1016/j.matdes.2009.11.030
   Web of Science ®Google Scholar
• Feng X, Liu H, Babu SS. Effect of grain size refinement and precipitation reactions on strengthening in friction stir processed Al-Cu alloys. Scr Mater. 2011;65:1057–1060. doi: 10.1016/j.scriptamat.2011.09.009
   Web of Science ®Google Scholar
• Genevois C, Deschamps A, Denquin A, et al. Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds. Acta Mater. 2005;53:2447–2458. doi: 10.1016/j.actamat.2005.02.007
   Web of Science ®Google Scholar
• Sato YS, Kokawa H. Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum. Metall Mater Trans A. 2001;32:3023–3031. doi: 10.1007/s11661-001-0177-8
   Web of Science ®Google Scholar