The dynamic properties of B₄C/6061Al neutron absorber composites fabricated by power metallurgy

References

• Kalaiselvan K, Murugan N, Parameswaran S. Production and characterization of AA6061-B4C stir cast composite. Mater Des. 2011;32:4004–4009. doi: 10.1016/j.matdes.2011.03.018
   Web of Science ®Google Scholar
• Wu GH, Wang X, Jiang LT, et al. A nanostructural design to produce high ductility of high volume fraction SiCp/Al composites with enhanced strength. Mater Des. 2014;61:141–145. doi: 10.1016/j.matdes.2014.04.048
   Web of Science ®Google Scholar
• Wu SS, You YA, An P, et al. Effect of modification and ceramic particles on solidification behavior of aluminum-matrix composites. J Mater Sci. 2002;37:1855–1860. doi: 10.1023/A:1014986930299
   Web of Science ®Google Scholar
• Shokat Z, Zohreh S, Behnam L, et al. Application of spark plasma sintering (SPS) for the fabrication of in situ Ni-TiC nanocomposite clad layer. J Alloys Compd. 2015;633:479–483. doi: 10.1016/j.jallcom.2015.01.276
   Web of Science ®Google Scholar
• Jia L, Li SF, Imai H, et al. Size effect of B4C powders on metallurgical reaction and resulting tensile properties of Ti matrix composites by in-situ reaction from Ti-B4C system under a relatively low temperature. Mater Sci Eng A. 2014;614:129–135. doi: 10.1016/j.msea.2014.07.020
   Web of Science ®Google Scholar
• Li YZ, Wang QZ, Wang WG, et al. Effect of interfacial reaction on age-hardening ability of B4C/6061Al composites. Mater Sci Eng A. 2015;620:445–453. doi: 10.1016/j.msea.2014.10.025
   Web of Science ®Google Scholar
• Shorowordi KM, Laoui T, Haseeb A, et al. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites. J Mater Process Tech. 2003;142:738–743. doi: 10.1016/S0924-0136(03)00815-X
   Web of Science ®Google Scholar
• Bastürk M, Arztmann J, Jerlich W, et al. Analysis of neutron attenuation in boron-alloyed stainless steel with neutron radiography and JEN-3 gauge. J Nucl Mater. 2005;341:189–200. doi: 10.1016/j.jnucmat.2005.02.003
   Web of Science ®Google Scholar
• Abrefah RG, Sogbadji RBM, Ampomah-Amoako E. Investigative studies on effect of reflector thickness on the performance of low enriched uranium-fueled miniature neutron source reactors. Nucl Eng Des. 2011;241:3017–3019. doi: 10.1016/j.nucengdes.2010.05.005
   Web of Science ®Google Scholar
• Li YZ, Wang QZ, Wang WG, et al. Effect of interfacial reaction on age-hardening ability of B4C/6061Al composites. Mater Sci Eng A. 2015;620:445–453. doi: 10.1016/j.msea.2014.10.025
   Web of Science ®Google Scholar
• Pozdniakov AV, Zolotorevskiy VS, Yu R, et al. Microstructure and material characterization of 6063/B4C and 1545K/B4C composites produced by two stir casting techniques for nuclear applications. J Alloys Compd. 2016;664:317–320. doi: 10.1016/j.jallcom.2015.12.228
   Web of Science ®Google Scholar
• Mo ZQ, Liu YZ, Geng JJ, et al. The effects of temperatures on microstructure evolution and mechanical properties of B4C-AA2024 composite strips prepared by semi-solid powder rolling. Mater Sci Eng A. 2016;652:305–314. doi: 10.1016/j.msea.2015.11.089
   Web of Science ®Google Scholar
• Shirvanimoghaddam K, Khayyam H, Abdizadeh H, et al. Boron carbide reinforced aluminium matrix composite:physical, mechanical characterization and mathematical modelling. Mater Sci Eng A. 2016;658:135–149. doi: 10.1016/j.msea.2016.01.114
   Web of Science ®Google Scholar
• Wu CD, Ma KK, Wu JL, et al. Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites. Mater Sci Eng A. 2016;675:421–430. doi: 10.1016/j.msea.2016.08.062
   Web of Science ®Google Scholar
• Lee M, Yoo YH. Analysis of ceramic/metal armour systems. Int J Impact Eng. 2001;25:829–829. doi: 10.1016/S0734-743X(01)00025-2
   Web of Science ®Google Scholar
• Abu Talib AR, Abbud LH, Ali A, et al. Ballistic impact performance of Kevlar-29 and Al2O3 powder/epoxy targets under high velocity impact. Mater Des. 2012;35:12–19. doi: 10.1016/j.matdes.2011.08.045
   Web of Science ®Google Scholar
• Ubeyli M, Deniz H, Demir T, et al. Ballistic impact performance of an armor material consisting of alumina and dual phase steel layers. Mater Des. 2011;32:1565–1570. doi: 10.1016/j.matdes.2010.09.025
   Web of Science ®Google Scholar
• Zhang JT, Shi HJ, Cai MC, et al. The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process. Mater Sci Eng A. 2009;527:218–224. doi: 10.1016/j.msea.2009.08.067
   Web of Science ®Google Scholar
• Zhou ZS, Wu GH, Jiang LT, et al. Analysis of morphology and microstructure of B4C/2024Al composites after 7.62 mm ballistic impact. Mater Des. 2014;63:658–663. doi: 10.1016/j.matdes.2014.06.042
   Web of Science ®Google Scholar
• Behm N, Yang H, Shen JH, et al. Quasi-static and high-rate mechanical behavior of aluminum-based MMC reinforced with boron carbide of various length scales. Mater Sci Eng A. 2016;650:305–316. doi: 10.1016/j.msea.2015.10.064
   Web of Science ®Google Scholar
• Wang XJ, Nie KB, Hu XS, et al. Effect of extrusion temperature on microstructure and mechanical properties of SiCp/Mg-Zn-Ca composite. J Alloy Compd. 2012;532:78–85. doi: 10.1016/j.jallcom.2012.04.023
   Web of Science ®Google Scholar
• Singh NK, Cadoni E, Singha MK, et al. Dynamic tensile behavior of multi phase high yield strength steel. Mater Des. 2011;32:5091–5098. doi: 10.1016/j.matdes.2011.06.027
   Web of Science ®Google Scholar
• Qiao JW, Chu MY, Cheng L. Plastic flows of in-situ metallic glass matrix composites upon dynamic loading. Mater Lett. 2014;119:92–95. doi: 10.1016/j.matlet.2013.12.110
   Web of Science ®Google Scholar