Effect of heat treatment on microstructures and mechanical properties of Al/Fe bimetal

References

• Li CA, Xiong J, Sun L, et al. Effect of Si content in hot dipping aluminium bath on Al-Fe bonding layer of aluminium piston with reinforced cast iron ring. Mater Sci Technol. 2012;28(8):953–958. doi: 10.1179/1743284712Y.0000000034
   Web of Science ®Google Scholar
• Sun L, Li CA, Tu JW, et al. Effect of surface treatment to inserted ring on Al-Fe bonding layer of aluminium piston with reinforced cast iron ring. J Cent South Univ. 2014;21(8):3037–3042. doi: 10.1007/s11771-014-2273-0
   Web of Science ®Google Scholar
• Moosavi-Khoonsari E, Jalilian F, Paray F, et al. Cast joining of cast iron to aluminium casting matrix. Mater Sci Technol. 2011;27(11):1707–1717.
   Web of Science ®Google Scholar
• Jiang WM, Fan ZT, Liu DJ, et al. Influence of gas flowrate on filling ability and internal quality of A356 aluminum alloy castings fabricated using the expendable pattern shell casting with vacuum and low pressure. Int J Adv Manuf Technol. 2013;67(9):2459–2468. doi: 10.1007/s00170-012-4663-5
   Web of Science ®Google Scholar
• Xu C, Xiao WL, Hanada SJ, et al. The effect of scandium addition on microstructure and mechanical properties of Al-Si-Mg alloy: a multi-refinement modifier, mater. Charact. 2015;110:160–169. doi: 10.1016/j.matchar.2015.10.030
   Web of Science ®Google Scholar
• Jiang W, Fan Z, Liu D, et al. Influence of process parameters on filling ability of A356 aluminium alloy in expendable pattern shell casting with vacuum and low pressure. Int J Cast Metal Res. 2012;25(1):47–52. doi: 10.1179/1743133611Y.0000000014
   Web of Science ®Google Scholar
• Jiang WM, Li GY, Fan ZT, et al. Investigation on the interface characteristics of Al/Mg bimetallic castings processed by lost foam casting. Metall Mater Trans A. 2016;47(5):2462–2470. doi: 10.1007/s11661-016-3395-9
   Google Scholar
• Oloyede O, Bigg TD, Cochrane RF, et al. Microstructure evolution and mechanical properties of drop-tube processed, rapidly solidified grey cast iron. Mater Sci Eng A. 2016;654:143–150. doi: 10.1016/j.msea.2015.12.020
   Web of Science ®Google Scholar
• Liu H, Hao JB, Han ZT, et al. Microstructural evolution and bonding characteristic in multi-layer laser cladding of NiCoCr alloy on compacted graphite cast iron. J Mater Process Technol. 2016;232:153–164. doi: 10.1016/j.jmatprotec.2016.02.001
   Web of Science ®Google Scholar
• Weng ZK, Wang AH, Wang YY, et al. Diode laser cladding of Fe-based alloy on ductile cast iron and related interfacial behavior. Surf Coat Technol. 2016;286:64–71. doi: 10.1016/j.surfcoat.2015.12.031
   Web of Science ®Google Scholar
• Zheng QX, Feng XM, Shen YF, et al. Dissimilar friction stir welding of 6061 Al to 316 stainless steel using Zn as a filler metal. J Alloys Comp. 2016;686:693–701. doi: 10.1016/j.jallcom.2016.06.092
   Web of Science ®Google Scholar
• Springer H, Kostka A, Payton EJ, et al. On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys. Acta Mater. 2011;59(4):1586–1600. doi: 10.1016/j.actamat.2010.11.023
   Web of Science ®Google Scholar
• Liu J, Jiang SC, Shi Y, et al. Effects of zinc on the laser welding of an aluminum alloy and galvanized steel. JMater Process Technol. 2015;224:49–59. doi: 10.1016/j.jmatprotec.2015.04.017
   Web of Science ®Google Scholar
• Jiang WM, Fan ZT, Li GY, et al. Effects of hot-dip galvanizing and aluminizing on interfacial microstructures and mechanical properties of aluminum/iron bimetallic composites. J Alloys Comp. 2016;688:742–751. doi: 10.1016/j.jallcom.2016.07.085
   Web of Science ®Google Scholar
• Liu Y, Bian XF, Yang JF, et al. An investigation of metallurgical bonding in Al-7Si/gray iron bimetal composites. J Mater Res. 2013;28(22):3190–3198. doi: 10.1557/jmr.2013.328
   Web of Science ®Google Scholar
• Krendelsberger N, Weitzer F, Schuster JC. On the reaction scheme and liquidus surface in the ternary system Al-Fe-Si. Metall Mater Trans A. 2007;38(8):1681–1691. doi: 10.1007/s11661-007-9182-x
   Google Scholar
• Jiang WM, Fan ZT, Li GY, et al. Effects of zinc coating on interfacial microstructures and mechanical properties of aluminum/steel bimetallic composites. J Alloy Compd. 2016;678:249–257. doi: 10.1016/j.jallcom.2016.03.276
   Web of Science ®Google Scholar
• Dong HG, Chen S, Song Y, et al. Refilled friction stir spot welding of aluminum alloy to galvanized steel sheets. Mater Des. 2016;94:457–466. doi: 10.1016/j.matdes.2016.01.066
   Web of Science ®Google Scholar
• Liu Y, Bian XF, Zhang K, et al. Interfacial microstructures and properties of aluminum alloys/galvanized low-carbon steel under high-pressure torsion. Mater Des. 2014;64:287–293. doi: 10.1016/j.matdes.2014.07.053
   Web of Science ®Google Scholar
• Bu HY, Yandouzi M, Lu C, et al. Effect of heat treatment on the intermetallic layer of cold sprayed aluminum coatings on magnesium alloy. Surf Coat Technol. 2011;205(19):4665–4671. doi: 10.1016/j.surfcoat.2011.04.018
   Web of Science ®Google Scholar
• Jindala V, Srivastava VC. Growth of intermetallic layer at roll bonded IF-steel/aluminum interface. J Mater Process Technol. 2008;195(1–3):88–93. doi: 10.1016/j.jmatprotec.2007.04.118
   Web of Science ®Google Scholar
• Springer H, Szczepaniak A, Raabe D. On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys. Acta Mater. 2015;96:203–211. doi: 10.1016/j.actamat.2015.06.028
   Web of Science ®Google Scholar
• Jin JY, Hong SI. Effect of heat treatment on tensile deformation characteristics and properties of Al3003/STS439 clad composite. Mater Sci Eng A. 2014;596:1–8. doi: 10.1016/j.msea.2013.12.019
   Web of Science ®Google Scholar