References
- Stets W. Werkstoffkundliche Grundlagen des Verbundgießens von Gußeisenlegierungen mit Stahlwerkstoffen [Basics of materials science of compound casting of cast-iron alloys and steel material] [dissertation]. Bochum: Ruhr University Bochum; 1998. Germany.
- Rong SF, Zhao XM, Zhou HT, et al. Study on coated-liquid-liquid trimetal composite casting hammer. Mater Res Innovat. 2014;18:316–322. doi: 10.1179/1432891714Z.000000000421
- Ißleib A, Friedel A, Lubojanski I. Verbundgießen von Eisen-Kohlenstoff-Legierungen – grundlegende metallurgische Reaktionen an der Grenzfläche – Teil I [Compound casting of iron-carbon alloys – fundamental metallurgical reactions at the interface – part I]. Gießerei-Praxis. 1995;15(16):286–289. Germany.
- Abbasi M, Toroghinejad MR. Effects of processing parameters on the bonding strength of Cu/Cu roll bonded strips. J Mater Process Technol. 2010;210(3):560–563. doi: 10.1016/j.jmatprotec.2009.11.003
- Liu HS, Zhang B, Zhang GP. Enhanced toughness and fatigue strength of cold roll bonded Cu/Cu laminated composites with mechanical contrast. Scr Mater. 2011;65(10):891–894. doi: 10.1016/j.scriptamat.2011.08.001
- Pan D, Gao K, Yu J. Cold roll bonding of bimetallic sheets and strips. Mater Sci Technol. 1989;5:934–938. doi: 10.1179/mst.1989.5.9.934
- Lehmann T. Experimentell-numerische Analyse mechanischer Eigenschaften von Aluminium/Magnesium-Werkstoffverbunden [Experimental and numerical analysis of mechanical properties of aluminium/magnesium compounds] [dissertation]. Chemnitz: Chemnitz University of Technology; 2012. Germany.
- Nerl C, Wimmer M, Riedel S, et al. Simulationsgestützte Verfahrensentwicklung zum Verbundgießen von Aluminiumwerkstoffen [Simulation-aided development of an aluminium compound casting process]. In: Müller HR, editor. Stranggießen [Continuous casting]. Frankfurt: Werkstoff-Informationsgesellschaft; 2010. p. 93–98. Germany.
- Carreker RP. Dip-Forming – a continuous casting process. J Metal. 1963;15(2):774–780.
- Hashimoto M, Tanaka T, Inoue T, et al. Development of cold rolling mill rolls of high speed steel type by using continuous pouring for cladding. ISIJ Int. 2002;42(9):982–989. doi: 10.2355/isijinternational.42.982
- Liang H, Xue Z, Wu C, et al. Research on continuous core-filling casting forming process of copper-clad aluminium composite material. Acta Metall Sinica. 2010;33(2):206–214.
- Su YJ, Liu XH, Huang HY, et al. Effects of processing parameters on the fabrication of copper cladding rods by horizontal core-filling continuous casting. Metall Mater Trans. 2011;42B:104–113. doi: 10.1007/s11663-010-9449-2
- Hajjari E, Divandari M, Razavi SH, et al. Dissimilar joining of Al/Mg light metals by compound casting process. J Mater Sci. 2011;46:6491–6499. doi: 10.1007/s10853-011-5595-4
- Zare GR, Divandari M, Arabi H. Investigation on interface of Al/Cu couples in compound casting. Mater Sci Technol. 2013;29(2):190–196. doi: 10.1179/1743284712Y.0000000096
- Wasmuth U, Meier L, Hofmann M, et al. Optimisation of composite castings by means of neutron measurements. CIRP Annals – Manuf Technol. 2008;57:579–582. doi: 10.1016/j.cirp.2008.03.079
- Moosavi-Khoonsari E, Jalilian F, Paray F, et al. Cast joining of cast iron to aluminium casting matrix. Mater Sci Technol. 2011;27(11):1707–1717.
- Liu T, Wang Q, Sui Y, et al. An investigation into aluminium-aluminium bimetal fabrication by squeeze casting. Mater Des. 2015;68:8–17. doi: 10.1016/j.matdes.2014.11.051
- Jiang W, Jiang Z, Li G, et al. Microstructure of Al/Al bimetallic composites by lost foam casting with Zn interlayer. Mater Sci Technol. 2017;34: 487–492. doi: 10.1080/02670836.2017.1407559
- Dong L, Chen W, Hou L, et al. Metallurgical process analysis and microstructure characterization of the bonding interface of QAl9-4 aluminum bronze and 304 stainless steel composite materials. J Mater Process Technol. 2016;238:325–332. doi: 10.1016/j.jmatprotec.2016.07.041
- Liu F, Jiang Y, Lu D, et al. Microstructure evolution and impact toughness of sandwich structured composite prepared by centrifugal casting and hot rolling process. Mater Sci Technol. 2014;31(3):295–302. doi: 10.1179/1743284714Y.0000000514
- Nerl C, Wimmer M, Hoffmann H, et al. Development of a continuous composite casting process fort he production of bilayer aluminium strips. J Mater Process Technol. 2014;214:1445–1455. doi: 10.1016/j.jmatprotec.2014.02.018
- Heugenhauser S, Kaschnitz E, Mittler T, et al. Development and numerical simulation of a compound belt casting process. In: The Minerals, Metals and Materials Society, editors. Light metals 2016. Wiley-Blackwell; 2016. p. 1017–1021.
- Pintore M, Starykov O, Mittler T, et al. Experimental investigations on the influence of the thermal conditions during composite casting on the microstructure of Cu-Al-bilayer-compounds. Int J Metalcasting. 2017;12(1):79–88. doi: 10.1007/s40962-017-0140-0
- Davis JR. Copper and copper alloys. ASM International; 2001.
- Doran D, Cather B. Construction materials reference book. London and New York: Abingdon; 2014.
- Mittler T, Greß T, Pintore M, et al. Kupfer-Hybridhalbzeuge: Gießtechnische Herstellung eines rotationssymmetrischen Schichtverbundes [Copper hybrid semi-finished products: casting of rotationally symmetric bilayer compounds]. Metall. 2016;6:248–251. Germany.