https://orcid.org/0000-0002-5792-5739
References
- Hossain R, Pahlevani F, Sahajwalla V. Effect of small addition of Cr on stability of retained austenite in high carbon steel. Mater Charact. 2017;125:114–122. doi: 10.1016/j.matchar.2017.02.001
- Luo Q, Xie J, Song Y. Effects of microstructures on the abrasive wear behaviour of spheroidal cast iron. Wear. 1995;184(1):1–10. doi: 10.1016/0043-1648(94)06499-7
- Chandrasekaran T. Effect of microstructure and hardness on the grinding abrasive wear resistance of a ball bearing steel. Wear. 1993;161(1-2):105–109. doi: 10.1016/0043-1648(93)90458-X
- Chenje TW, Simbi DJ, Navara E. Relationship between microstructure, hardness, impact toughness and wear performance of selected grinding media for mineral ore milling operations. Mater Des. 2004;25(03):11–18. doi: 10.1016/S0261-3069(03)00168-7
- Leskovšek V, Šuštaršič B, Jutriša G. The influence of austenitizing and tempering temperature on the hardness and fracture toughness of hot-worked H11 tool steel. J Mater Process Technol. 2006;178(1-3):328–334. doi: 10.1016/j.jmatprotec.2006.04.016
- Abbaszadeh K, Saghafian H, Kheirandish S. Effect of bainite morphology on mechanical properties of the mixed bainite-martensite microstructure in D6AC steel. J Mater Sci Technol. 2012;28(4):336–342. doi: 10.1016/S1005-0302(12)60065-6
- Tomita Y. Effect of microstructure on plane-strain fracture toughness of aisi 4340 steel. Metall Trans A. 1988;19(10):2513–2521. doi: 10.1007/BF02645479
- Young CH, Bhadeshia HKDH. Strength of mixtures of bainite and martensite. Mater Sci Technol. 1994;10(3):209–214. doi: 10.1179/mst.1994.10.3.209
- Doebelin N, Kleeberg R. Profex: a graphical user interface for the Rietveld refinement program BGMN. J Appl Crystallogr. 2015;48(5):1573–1580. doi: 10.1107/S1600576715014685
- Bhadeshia HKDH. Bainite in steels, transformations, microstructure and properties. Michigan, UK: IOM Communications; 2001.
- McCusker LB, Von Dreele RB, Cox DE, et al. Rietveld refinement guidelines. J Appl Crystallogr. 1999;32(1):36–50. doi: 10.1107/S0021889898009856
- Babu SS, Vitek JM, David SA, et al. Characterization and prediction of austenite formation and decomposition in steel welds. Mater Sci Technol. 2003: 343–352.
- Cullity BD, Sotck SR. Elements of X-ray diffraction. 1st ed. Massachusetts, United States: Wesley; 1956.
- Penha RN, Vatavuk J, Couto AA, et al. Effect of chemical banding on the local hardenability in AISI 4340 steel bar. Eng Fail Anal. 2015;53:59–68. doi: 10.1016/j.engfailanal.2015.03.024
- Song W, Choi P-P, Inden G, et al. On the spheroidized carbide dissolution and elemental partitioning in high carbon bearing steel 100Cr6. Metallurgical and Materials Transactions A. 2014;45(2):595–606. doi: 10.1007/s11661-013-2048-5
- Hearne SJ, Floro JA. Mechanisms inducing compressive stress during electrodeposition of Ni. J Appl Phys. 2005;97(1):1–6. doi: 10.1063/1.1819972
- Janssen GCAM, Kamminga J-D. Stress in hard metal films. Appl Phys Lett. 2004;85(15):3086–3088. doi: 10.1063/1.1807016
- Hertz HR, Jones DE, Schott GA. Miscellaneous papers. Macmillan. 1896;92:156–171.