References
- Bag A, Ray KK, Dwarakadasa ES. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels. Metall Mater Trans A. 1999;30:1193–1202. doi: 10.1007/s11661-999-0269-4
- Kumar A, Singh SB, Ray KK. Influence of bainite/martensite-content on the tensile properties of low carbon dual-phase steels. Mater Sci Eng A. 2008;474:270–282. doi: 10.1016/j.msea.2007.05.007
- Tian JY, Xu G, Jiang ZY, et al. Effect of Ni addition on bainite transformation and properties in a 2000MPa grade ultrahigh strength bainitic steel. Met Mater Int. 2018;24:1202–1212. doi: 10.1007/s12540-018-0139-y
- Sun SH, Zhao AM, Ding R, et al. Effect of heat treatment on microstructure and mechanical properties of quenching and partitioning steel. Acta Metall Sin. 2018;31:216–224. doi: 10.1007/s40195-017-0667-3
- Caballero FG, Bhadeshia HKDH, Mawella KJA, et al. Very strong low temperature bainite. Mater Sci Technol. 2002;18:279–284. doi: 10.1179/026708301225000725
- García-Mateo C, Caballero FG, Bhadeshia HKDH. Acceleration of low-temperature bainite. ISIJ Int. 2003;43:285–288.
- Zhao JW, Jiang ZY. Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242. doi: 10.1016/j.pmatsci.2018.01.006
- Sun J, Jiang T, Wang Y, et al. Effect of grain refinement on high-carbon martensite transformation and its mechanical properties. Mater Sci Eng A. 2018;726:342–349. doi: 10.1016/j.msea.2018.04.095
- Prawoto Y, Jasmawati N, Sumeru K. Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel. J Mater Sci Technol. 2012;28:461–466. doi: 10.1016/S1005-0302(12)60083-8
- Dong J, Liu CX, Liu YC, et al. Influence of austenite grain size on martensite start temperature of Nb-V-Ti microalloyed ultra-high strength steel. Mater Sci Forum. 2016;848:624–632. doi: 10.4028/www.scientific.net/MSF.848.624
- Hanamura T, Torizuka S, Tamura S, et al. Effect of austenite grain size on the mechanical properties in air-cooled 0.1C-5Mn martensitic steel. Mater Sci Forum. 2014;783-786:1027–1032. doi: 10.4028/www.scientific.net/MSF.783-786.1027
- Yang HS, Bhadeshia HKDH. Austenite grain size and the martensite-start temperature. Scripta Mater. 2009;60:493–495. doi: 10.1016/j.scriptamat.2008.11.043
- García-Junceda A, Capdevila C, Caballero FG, et al. Dependence of martensite start temperature on fine austenite grain size. Scripta Mater. 2008;58:134–137. doi: 10.1016/j.scriptamat.2007.09.017
- Lee SJ, Van Tyne CJ. A kinetics model for martensite transformation in plain carbon and low-alloyed steels. Metall Mater Trans A. 2012;43:422–427. doi: 10.1007/s11661-011-0872-z
- Brofman PJ, Ansell GS. On the effect of fine grain size on the Ms temperature in Fe-27Ni-0.025C alloys. Metall Mater Trans A. 1983;14:1929–1931. doi: 10.1007/BF02645565
- Lan LY, Qiu CL, Zhao DW, et al. Effect of austenite grain size on isothermal bainite transformation in low carbon microalloyed steel. Mater Sci Technol. 2011;27:1657–1663. doi: 10.1179/1743284710Y.0000000026
- Hu F, Hodgson PD, Wu KM. Acceleration of the super bainite transformation through a coarse austenite grain size. Mater Lett. 2014;122:240–243. doi: 10.1016/j.matlet.2014.02.051
- Xu G, Liu F, Wang L, et al. A new approach to quantitative analysis of bainitic transformation in a superbainite steel. Scripta Mater. 2013;68:833–836. doi: 10.1016/j.scriptamat.2013.01.033
- Matsuzaki A, Bhadeshia HKDH. Effect of austenite grain size and bainite morphology on overall kinetics of bainite transformation in steels. Met Sci J. 1999;15:518–522.
- Yakubtsov IA, Purdy GR. Analyses of transformation kinetics of carbide-free bainite above and below the athermal martensite-start temperature. Metall Mater Trans A. 2012;43:437–446. doi: 10.1007/s11661-011-0911-9
- Samanta S, Biswas P, Giri S, et al. Formation of bainite below the MS temperature: kinetics and crystallography. Acta Mater. 2016;105:390–403. doi: 10.1016/j.actamat.2015.12.027
- Tian JY, Xu G, Zhou MX, et al. Refined bainite microstructure and mechanical properties of a high-strength low-carbon bainitic steel treated by austempering below and above MS. Steel Res Int. 2018;89:1700469. DOI:10.1002/srin.201700469.
- Zhao L, Qian L, Meng J, et al. Below-MS austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels. Scripta Mater. 2016;112:96–100. doi: 10.1016/j.scriptamat.2015.09.022
- Tian JY, Xu G, Jiang ZY, et al. Transformation behavior and properties of carbide-free bainite steels with different Si contents. Steel Res Int. 2018;90:180034. DOI:10.1002/srin.201800474.
- Long XY, Zhang FC, Kang J, et al. Low-temperature bainite in low-carbon steel. Mater Sci Eng A. 2014;594:344–351. doi: 10.1016/j.msea.2013.11.089
- Tian JY, Xu G, Zhou MX, et al. The effects of Cr and Al addition on transformation and properties in low-carbon bainitic steels. Metals. 2017;7:40–50. doi: 10.3390/met7020040
- Caballero FG, Bhadeshia HKDH. Very strong bainite. Curr Opin Solid State Mater Sci. 2004;8:251–257. doi: 10.1016/j.cossms.2004.09.005
- Andrews KW. Empirical formulae for the calculation of some transformation temperatures. ISIJ Int. 1965;203:721–727.
- Bhadeshia HKDH. Bainite in steels. London: Institute of Materials; 1992; 1–450.
- Yang HS, Bhadeshia HKDH. Uncertainties in dilatometric determination of martensite start temperature. Mater Sci Technol. 2007;23:556–560. doi: 10.1179/174328407X176857
- Da Silva EP, De Knijf D, Xu W, et al. Isothermal transformations in advanced high strength steels below martensite start temperature. Mater Sci Technol. 2015;31:808–816. doi: 10.1179/1743284714Y.0000000719
- Navarro-López A, Hidalgo J, Sietsma J, et al. Characterization of bainitic/martensitic structures formed in isothermal treatments below the MS temperature. Mater Charact. 2017;128:248–256. doi: 10.1016/j.matchar.2017.04.007
- Toji Y, Miyamoto G, Raabe D. Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation. Acta Mater. 2015;86:137–147. doi: 10.1016/j.actamat.2014.11.049
- Tariq F, Baloch RA. One-step quenching and partitioning heat treatment of medium carbon low alloy steel. J Mater Eng Perform. 2014;23:1726–1739. doi: 10.1007/s11665-014-0902-2
- Jiang T, Liu HJ, Sun JJ, et al. Effect of austenite grain size on transformation of nanobainite and its mechanical properties. Mater Sci Eng A. 2016;666:207–213. doi: 10.1016/j.msea.2016.04.041
- Singh K, Kumar A, Singh A. Effect of prior austenite grain size on the morphology of nano-bainitic steels. Metall Mater Trans A. 2018;49:1348–1354. doi: 10.1007/s11661-018-4492-8
- Zhou MX, Xu G, Wang L, et al. Effects of austenitization temperature and compressive stress during bainitic transformation on the stability of retained austenite. T Indian I Metals. 2017;70:1447–1453. doi: 10.1007/s12666-016-0941-5
- Hu H, Xu G, Wang L, et al. The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steels. Mater Des. 2015;84:95–99. doi: 10.1016/j.matdes.2015.06.133
- Du WS, Cao R, Yan YJ, et al. Fracture behavior of 9% nickel high-strength steel at various temperatures: part 1. Tensile tests. Mater Sci Eng A. 2008;486:611–625. doi: 10.1016/j.msea.2007.09.057