Uphill quenching to reduce residual stress in a heat treatable aluminium alloy

References

• Lin GY, Zhang H, Zhu W, et al. Residual stress in quenched 7075 aluminum alloy thick plates. Trans Nonferrous Metals Soc China. 2003;13(3):641–644.
   Web of Science ®Google Scholar
• Myer RT, Kilpatrick SA, Backus WE. Stress-relief of aluminium for aircraft. Metal Prog. 1959;3:112–115.
   Google Scholar
• Kleint RE, Janney FG. Stress relief in aluminum forgings. Light Metal Age. 1958;2:14–21.
   Google Scholar
• Klein J. Cold reduction technique puts more forgings in the air. Precis Metal Molding. 1967;6:53–54.
   Google Scholar
• Betteridge W. The relief of internal stresses in aluminum alloys by cold working. In: Symposium on Internal Stresses in Metals and Alloys. London: Institute of Metals; 1948.
   Google Scholar
• Nickola WE. Residual stress alterations via cold rolling and stretching of an aluminum alloy. In: Mordfin L., editor. Mechanical relaxation of residual stresses. West Conshohocken (PA): ASTM International; 1988. p. 7–18.
   Google Scholar
• AMS2767. Uphill quenching of aluminum alloy product. Warrendale (PA): SAE International; 2013.
   Google Scholar
• Hill HM, Barker RS, Willey LA. The thermal mechanical method for relieving residual quench stresses in aluminum alloys. Trans Am Soc Metals. 1959;52:657–671.
   Google Scholar
• Mattos WS, Totten GE, Canale LCF. Uphill quenching of aluminum alloys. Mate Perform Charact. 2017;6(5):894–903.
   Web of Science ®Google Scholar
• Robinson JS, Tanner DA, van Petegem, et al. Influence of quenching and aging on residual stress in Al-Zn-Mg-Cu alloy 7449. Mater Sci Technol. 2012;28(4):420–430. doi: 10.1179/1743284711Y.0000000063
   Web of Science ®Google Scholar
• Krawitz AD. Neutron strain measurement. Mater Sci Technol. 2011;27(3):589–603. doi: 10.1179/1743284710Y.0000000029
   Web of Science ®Google Scholar
• DD CEN ISO/TS 21432. Non-destructive testing: standard test method for determining of residual stresses by neutron diffraction. London: British Standards Institute; 2005.
   Google Scholar
• Ohms C, Youtsos A, Webster GA, et al. Polycrystalline materials – Determination of residual stresses by neutron diffraction, ISO/TTA3. Geneva: ISO; 2001.
   Google Scholar
• Hutchings MT, Withers PJ, Holden TM, et al. Introduction to the characterisation of residual stress by neutron diffraction. Boca Raton (FL): CRC Press; 2005. p. 424.
   Google Scholar
• Robinson JS, Pirling T, Truman CE, et al. Residual stress relief in the aluminium alloy 7075. Materials Science  and Technology. 2017;33(15):1765–1775. doi: 10.1080/02670836.2017.1318243
   Web of Science ®Google Scholar
• Robinson JS, Truman CE, Hossain S, et al. Influence of cold compression on the residual stresses in 7449 forgings. Adv X-Ray Anal. 2009;52:667–674.
   Google Scholar
• Fitzpatrick ME, Fry AT, Holdway P, et al. Determination of residual stresses by X-ray diffraction: measurement good practice guide. Teddington: National Physical Laboratory; 2005.
   Google Scholar
• Cullity BD, Stock SR. Elements of X-ray diffraction. 3rd ed. Upper Saddle River (NJ): Prentice Hall; 2001.
   Google Scholar
• Hauk VM, Macherauch E. A useful guide for X-ray stress evaluation (XSE). Adv X-Ray Anal. 1983;27:81–89.
   Google Scholar
• E92-92. Standard test method for vickers hardness of metallic materials. West Conshohocken (PA): ASTM International; 1992.
   Google Scholar
• Newton Heat Treating. Available from: http://newtonheattreating.com.
   Google Scholar
• Croucher T. Uphill quenching of aluminum: rebirth of a little-known process. Heat Treating. 1983;15(10):30–34.
   Google Scholar
• Araghchi M, Mansouri H, Vafaei R, et al. A novel cryogenic treatment for reduction of residual stresses in 2024 aluminum alloy. Mater Sci Eng Struct Mater Prop Micro Process. 2017;689:48–52. doi: 10.1016/j.msea.2017.01.095
   Web of Science ®Google Scholar
• Ko D-H, Ko D-C, Lim H-J, et al. FE-simulation coupled with CFD analysis for prediction of residual stresses relieved by cryogenic heat treatment of Al6061 tube. Int J Prec Eng Manuf. 2013;14(8):1301–1309. doi: 10.1007/s12541-013-0177-9
   Web of Science ®Google Scholar
• Wang QC, Wang LT, Peng W. Thermal stress relief in 7050 aluminum forgings by uphill quenching. Mater Sci Forum, 2005;490−491:97–101. doi: 10.4028/www.scientific.net/MSF.490-491.97
   Google Scholar
• Yoshihara N, Hino Y. Removal technique of residual stress in 7075 aluminum alloy. In: Residual Stresses III: Science and Technology; 1991 July 23–26; Tokushima, Japan.
   Google Scholar
• Croucher T. Fundamentals of quenching aluminium alloys. Tom Croucher; 2009.
   Google Scholar
• Pellman MA, Kilhefner PT, Baxter III, et al. Vapor phase uphill quenching of metal alloys using fluorochemicals. Neradjk: Air Products and Chemicals; 1990.
   Google Scholar