Thermal and numerical simulation of mould electromagnetic stirring of GCr15 bearing steel

References

• H.K.D.H. Bhadeshia steels for bearings. Prog Mater Sci. 2012;57(2):268–435.
   Web of Science ®Google Scholar
• Yang L, Cheng GG, Li SJ, et al. A coupled model of TiN inclusion growth in GCr15SiCr during solidification in the electroslag remelting process. Int J Miner Metall. Mater. 2015;22(12):1266–1272.
   Web of Science ®Google Scholar
• Fu JW. Microstructure and corrosion behavior of hot-rolled GCr15 bearing steel. Appl Phys A-Mater Sci Process. 2016;122:416. doi:10.1007/s00339-016-9975-0.
   Web of Science ®Google Scholar
• Flemings CM. Our Understanding of Macrosegregation: Past and Present. ISIJ Int. 2000;40(9):833–841.
   Web of Science ®Google Scholar
• Schole A. Segregation in CC. Ironmak Steelmak. 2005;32(2):101–108.
   Google Scholar
• Choudhary SK, Ganguly S. Morphology and segregation in continuously cast high carbon steel billets. ISIJ Int. 2007;47(12):1759–1766.
   Web of Science ®Google Scholar
• Sun H, Li L, Cheng X, et al. Reduction in macrosegregation on 380 mm×490 mm bloom caster equipped combination M + F-EMS by optimising casting speed. Ironmak Steelmak. 2015;42(6):439–449.
   Web of Science ®Google Scholar
• Guo J, Qian DS, Deng JD. Grain refinement limit during hot radial ring rolling of as-cast GCr15 steel. J Mater Process Tech. 2016;231:151–161.
   Web of Science ®Google Scholar
• Kyung SO, Young WC. Macrosegregation behaviour in continuously cast high carbon steel blooms and billets at the final stage of solidification in combination stirring. ISIJ Int. 1995;35(7):866–875.
   Web of Science ®Google Scholar
• Choudhary SK, Ganguly S, Sengupta A, et al. Solidification morphology and segregation in continuously cast steel slab. J Mater Process Tech. 2017;243:312–321.
   Web of Science ®Google Scholar
• Pikkarainen T, Vuorenmaa V, Rentola I, et al. Effect of superheat on macrostructure and macrosegregation in continuous cast low-alloy steel slabs). 4th International Conference on Advances in Solidification Processes; 2014 July 8–11; Beaumont Estates, Old Windsor: IOP; 2016.
   Google Scholar
• Du G, Li J, Wang ZB. Control of carbide precipitation during electroslag remelting continuous rapid solidification of GCr15 steel. Metall Mater Trans B. 2017;48(6):2873–2890.
   Web of Science ®Google Scholar
• Toh T, Hasegawa H, Harada H. Evaluation of multiphase phenomena in Mold Pool under In-mold electromagnetic stirring in steel CC. ISIJ Int. 2001;41(10):1245–1251.
   Web of Science ®Google Scholar
• Natarajan TT, El-Kaddah N. Finite element analysis of electromagnetic and fluid flow phenomena in rotary electromagnetic stirring of steel. Appl Math Model. 2004;28(1):47–61.
   Web of Science ®Google Scholar
• Javurek M, Barna M, Gittler P, et al. Flow modelling in continuous casting of round bloom strands with electromagnetic stirring. Steel Res Int. 2008;79(8):616–627.
   Web of Science ®Google Scholar
• Nakata H, Inoue T, Mori H, et al. Improvement of billet surface quality by ultra-high-frequency electromagnetic casting. ISIJ Int. 2002;42(3):264–272.
   Web of Science ®Google Scholar
• Toh T, Takeuchi E, Hojo M, et al. Electromagnetic control of initial solidification in continuous casting of steel by low frequency alternating magnetic field. ISIJ Int. 1997;37:1112.
   Web of Science ®Google Scholar
• Qi P, Li LB. Effects of electromagnetic stirring frequency on the microstructure and mechanical properties of Al-7Si-0.42 Mg-0.1Cu Alloy by semi-solid processing. Materials Science Forum Switzerland. 2017;898:104–110.
   Google Scholar
• Sahoo PP, Kumar A, Halder J, et al. Optimisation of electromagnetic stirring in steel billet caster by using image processing technique for improvement in billet quality. ISIJ Int. 2009;49(4):521–528.
   Web of Science ®Google Scholar
• Wang SQ, de toledo GA, Välimaa K, et al. Magnetohydrodynamic phenomena, fluid control and computational modeling in the CC of billet and bloom. ISIJ Int. 2014;54(10):2273–2282.
   Web of Science ®Google Scholar
• Stransky K, Kavicka F, Sekanina B, et al. The effect of electromagnetic stirring on the crystallization of concast billets. Mater Technol. 2011;45(2):163–166.
   Google Scholar
• Bridge MR, Rogers GD. Metall. Trans. B. 1984;15:581–589.
   Google Scholar
• Tzavaras AA, Brody HD. Electromagnetic stirring and continuous casting – achievements, problems, and goals. JOM.1984.
   Google Scholar
• Zimmerman WBJ. Comsol finite element multiphysics modeling and analysis. Beijing: Communication Press; 2007.
   Google Scholar
• Xu Y, Xu RJ, Fan ZJ, et al. Analysis of cracking phenomena in continuous casting of 1Cr13 stainless steel billets with final electromagnetic stirring. Int J Min Met Mater. 2016;23(5):534–541.
   Web of Science ®Google Scholar
• Geng X, Li X, Liu FB, et al. Optimisation of electromagnetic field and flow field in round billet continuous casting mould with electromagnetic stirring. Ironmak Steelmak. 2015;42(9):675–682.
   Web of Science ®Google Scholar
• Campanella T, Charbon C, Rappaz M. Grain refinement induced by electromagnetic stirring: a dendrite fragmentation criterion. Metall Mater Trans A. 2004;35(10):3201–3210.
   Web of Science ®Google Scholar
• Doherty RD. Comments on ‘mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts’. Scripta Mater. 2003;49:1219–1222.
   Web of Science ®Google Scholar
• Nafisi S, Emadi D, Shehata MT, et al. Effects of electromagnetic stirring and superheat on the microstructural characteristics of Al–Si–Fe alloy. Mat Sci Eng A-Struct. 2006;432(1–2):71–83.
   Google Scholar
• Taghavi F, Saghafian H, Kharrazi YHK. Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy. Mater Design. 2009;30(1):115–121.
   Web of Science ®Google Scholar
• Mullis AM. Growth induced dendritic bending and rosette formation during solidification in a shearing flow. Acta Mater. 1999;47(6):1783–1789.
   Web of Science ®Google Scholar
• Kirkaldy JS, von Destinon-Forstmann J, Brigham RJ. Simulation of banding in steels. Can Metall Q. 1962;1(1):59–81.
   Google Scholar
• Guo YF, Sun MY, Xu B, et al. Effects of liquid fraction on the microstructure and mechanical properties in forge solidifying 12Cr1MoV steel. J Mater Process Technol. 2018;256:25–35.
   Web of Science ®Google Scholar