References
- B. Gilmont, Automobile industry insight, 2010, p. 76−77 .
- Bartz WJ. Aluminium materials technology for automobile construction. London: Mechanical Engineering Publications; 1993. p. 1.
- Möller H, Govender G, Stumpf WE. Application of shortened heat treatment cycles on A356 automotive brake calipers with respective globular and dendritic microstructures. Trans Nonferrous Metals Soc China. 2010;20:1780–1785. doi: 10.1016/S1003-6326(09)60374-5
- Li B, Wang HW, Jie JC, et al. Microstructure evolution and modification mechanism of the ytterbium modified Al–7.5% Si–0.45% Mg alloys. J Alloys Compds. 2011;509:3387–3392. doi: 10.1016/j.jallcom.2010.12.081
- Zhang B, Maijer DM, Cockcroft SL. Development of a 3-D thermal model of the low-pressure die-cast (LPDC) process of A356 aluminum alloys wheels. Mater Sci Eng A. 2007;464:295–305. doi: 10.1016/j.msea.2007.02.018
- Murty BS, Kori SA, Chakraborty M. Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying. Int Mater Rev. 2002;47:3–29. doi: 10.1179/095066001225001049
- Spencer DB, Mehrabian R, Flemings MC. Rheological behavior of Sn-15 pct Pb in the crystallization range. Metall Trans B. 1972;3:1925–1932. doi: 10.1007/BF02642580
- Flemings MC. Behavior of metal alloys in the semisolid state. Metall Trans A. 1991;22:957–981. doi: 10.1007/BF02661090
- Saklakoglu N, Saklakoglu IE, Tanoglu M, et al. Mechanical properties and microstructural evaluation of AA5013 aluminum alloy treated in the semi-solid state by SIMA process. J Mater Proces Tech. 2004;148:103–107. doi: 10.1016/j.jmatprotec.2004.01.051
- Fan Z. Semisolid metal processing. Int Mater Rev. 2002;47:49–85. doi: 10.1179/095066001225001076
- Lin CW, Hung FY, Lui TS. Microstructural characteristics and mechanical behaviours of new type SIMA processed aluminum alloy. Chapter 15 Aluminium Alloys – Chapter from the book Aluminium Alloys – Recent Trends in Processing, Characterization, Mechanical Behavior and Applications, INTECH Open Science Published London; 2017, p. 279–310.
- Wang JG, Lu P, Wang HY, et al. Semisolid microstructure evolution of the predeformed AZ91D alloy during heat treatment. J Alloys Compds. 2005;395:108–112. doi: 10.1016/j.jallcom.2004.11.050
- Irani SBH, Hanzaki AZ, Bazaz B, et al. Microstructure evolution and semi-solid deformation behavior of an A356 aluminum alloy processed by strain induced melt activated method. Mater Des. 2013;46:579–587. doi: 10.1016/j.matdes.2012.10.041
- Sirong Y, Dongcheng L, Kim N. Microstructure evolution of SIMA processed Al2024. Mater Sci Eng A. 2006;420:165–170. doi: 10.1016/j.msea.2006.01.061
- Sahoo KL, Poddar P, Kumar R, et al. Strain induced melt activation – an effective route to produce high performance alloy plates and sheets. Trans Indian Inst Met. 2009;62:275–278. doi: 10.1007/s12666-009-0041-x
- Song YB, Park KT, Hong CP. Recrystallization behaviour of 7175 Al alloy during modified strain-induced melt-activated (SIMA) process. Mater Trans. 2006;47:1250–1256. doi: 10.2320/matertrans.47.1250
- Bolouri A, Shahmiri M, Cheshmeh ENH. Microstructural evolution during semisolid state strain induced melt activation process of aluminum 7075 alloy. Trans Nonferrous Metals Soc China. 2010;20:1663–1671. doi: 10.1016/S1003-6326(09)60355-1
- Birol Y. Semi-solid processing of the primary aluminium die casting alloy A365. J Alloys Compds. 2009;473:133–138. doi: 10.1016/j.jallcom.2008.05.074
- Doherty RD, Lee HI, Feest EA. Microstructure of stir-cast metals. Mater Sci Eng. 1984;65(1):181–189. doi: 10.1016/0025-5416(84)90211-8
- Behzad B, Mehrdad AK. Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy. Metals (Basel). 2016;6(3):42. doi: 10.3390/met6030042
- Franetovic V, Lints R, Carter J. Fracture processes in semi-solid-formed Al-7%Si-based alloys. In: Das SK, editor. Aluminum 2003. San Diego (CA): TMS; 2003. p. 133–144.
- Lin HQ, Wang JG, Wang HY, et al. Effect of predeformation on the globular grains in AZ91D alloy during strain induced melt activation (SIMA) process. J Alloys Compds. 2007;431(1–2):141–147. doi: 10.1016/j.jallcom.2006.05.067
- Witten TA, Sander LM. Diffusion limited aggregation, a kinetic critical phenomenon. Phys Rev Lett. 1981;47(19):1400–1403. doi: 10.1103/PhysRevLett.47.1400
- Paes M, Zoqui EJ. Semi-solid behavior of new Al-Si-Mg alloy for thixoforming. Mat Sci Eng A. 2005;406(1–2):63–73. doi: 10.1016/j.msea.2005.07.018
- Wang QG, Caceres CH, Grifiths JR. Damage by eutectic particle cracking in aluminium casting alloys A356/357. Metall Mater Trans A. 2003;34(12):2901–2912. doi: 10.1007/s11661-003-0190-1
- Bai YF, Zhao HD. Tensile properties and fracture behaviour of partial squeeze added slow shot die-cast A356 aluminium alloy. Mater Des. 2010;31(9):4237–4243. doi: 10.1016/j.matdes.2010.04.005